Hege druk PTFE-slangfabrikant, fabryk, leveransier yn Sina
Besteflon Industrial Co., Ltd waard oprjochte yn 2005, is ien fan 'e liedende hege druk ptfe-slangfabrikanten, fabriken en leveransiers yn Sina, akseptearje OEM, ODM, SKD-oarders.Wy hawwe rike ûnderfiningen yn produksje & ûndersyk ûntwikkeling foar ferskate ptfe hege druk slang typen.Wy rjochtsje ús op avansearre technology, strange produksjestap, en in perfekt QC-systeem.
Sertifikaasjes: ISO9001:2015 │ RoHS-rjochtline (EU) 2015/863 │ US FDA 21 CFR 177.1550 │ EU GHS SDS
Hege druk Smooth Bore PTFE Hose
Hege druk glêde bore PTFE slang is ûntwurpen foar hege-druk en hege-puls swiere-duty applikaasjes.It behâldt goede fleksibiliteit troch de superieure spanningskontrôle fan it single-layer lytse wire diameter plated braided design.
PTFE smoothbore hege druk slang is ideaal foar in protte gemyske, gas en hege suverens applikaasjes.In wiidweidige line fan inkele boarnePTFE slangenis ideaal foar elke situaasje.Dizze slangen binne te krijen yn ferskate fersterkingsstilen - single braid, dûbele braids.Fersterkingsmateriaal is makke fan 300 series (304/316) roestfrij stiel.
PTFEis in fluoropolymer dat jout de bêste totale gemyske ferset yn 'e yndustry.Tagelyk biedt it heul hege (oant +260 ℃) en lege temperatuerwurdearrings (-65 ℃).Derneist kin PTFE trochgeande bûgen, trilling en ympuls ferneare.PTFE-slang sil syn gebrûk fine yn in protte yndustry.
Kies út virgin PTFE of conductive swarte buizen.Beskikber yn bulk lingtes as folsleine gearkomsten en accessoires.Ferskate soarten testen kinne ek wurde útfierd.
Lichtgewicht single braid hege druk slangen binne ûntworpen foar applikaasjes dy't sterkte, betrouberens en prestaasjes op lange termyn fereaskje mei leech profyl en fleksibiliteit.
Jo leveransier fan PTFE hege druk slangen
Kies jo hege druk PTFE-slang
Medium Wall PTFE Series
Binnenbuis: Virgin / Conductive swarte PTFE
Tube muorre dikte: 0.85mm - 1.5mm (ôfhinklik fan maten)
Fersterkjende laach: Single layer hege trek RVS 304/316 wire braided
Temperatuerberik: -65 ℃ ~ +260 ℃ (-85 ℉ ~ + 500 ℉), hegere temperatuer, legere druk
Eigenskippen:
in.Excellent hege en lege temperatuer ferset
b.Excellent gemyske ferset, oalje ferset
c.Non-sticky, glêd oerflak, lege wriuwing koeffizient
d.Weather & Aging ferset
e.Licht gewicht en fleksibeler as standert PTFE glêde bore slang
Oanfraach:Levering fan automotive fluids, reaktive ynjeksjefoarmmasines, yndustriële ynstrumintaasje, Aerospace yndustry, hydraulyske apparatuer, hot runner systeem en ensfh.
ZXGM101 Medium Wall PTFE Series Spec
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM101-04 | 3/16" | 5 | 0.323 | 8.2 | 0.033 | 0.85 | 3770 | 260 | 15080 | 1040 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM101-05 | 1/4" | 6.5 | 0.394 | 10 | 0.033 | 0.85 | 3262.5 | 225 | 13050 | 900 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM101-06 | 5/16" | 8 | 0.461 | 11.7 | 0.033 | 0.85 | 2900 | 200 | 11600 | 800 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM101-07 | 3/8" | 10 | 0.524 | 13.3 | 0.033 | 0.85 | 2610 | 180 | 10440 | 720 | 1.299 | 33 | -6 | ZXTF0-06 |
| ZXGM101-08 | 13/32" | 10.3 | 0.535 | 13.6 | 0.033 | 0.85 | 2537,5 | 175 | 10150 | 700 | 1.811 | 46 | -6 | ZXTF0-06 |
| ZXGM101-10 | 1/2" | 13 | 0.681 | 17.3 | 0.039 | 1 | 2102.5 | 145 | 8410 | 580 | 2.598 | 66 | -8 | ZXTF0-08 |
| ZXGM101-12 | 5/8" | 16 | 0.799 | 20.3 | 0.039 | 1 | 1595 | 110 | 6380 | 440 | 5.906 | 150 | -10 | ZXTF0-10 |
| ZXGM101-14 | 3/4" | 19 | 0.921 | 23.4 | 0.047 | 1.2 | 1305 | 90 | 5220 | 360 | 8.898 | 226 | -12 | ZXTF0-12 |
| ZXGM101-16 | 7/8" | 22.2 | 1.043 | 26.5 | 0.047 | 1.2 | 1087,5 | 75 | 4350 | 300 | 9.646 | 245 | -14 | ZXTF0-14 |
| ZXGM101-18 | 1" | 25.4 | 1.161 | 29.5 | 0.059 | 1.5 | 942,5 | 65 | 3770 | 260 | 11.811 | 300 | -16 | ZXTF0-16 |
* Moetsje SAE 100R14 standert.
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
Dikke Wall PTFE Series
Binnenbuis: Virgin / Conductive swarte PTFE
Tube muorre dikte: 1mm
Fersterkjende laach: Single layer hege trek RVS 304/316 wire braided
Temperatuerberik: -65 ℃ ~ +260 ℃ (-85 ℉ ~ + 500 ℉), hegere temperatuer, legere druk
Eigenskippen:
in.Excellent hege en lege temperatuer ferset
b.Excellent gemyske ferset, oalje ferset
c.Non-sticky, glêd oerflak, lege wriuwing koeffizient
d.Weather & Aging ferset
e.Fleksibeler as standert PTFE glêde bore slang
Oanfraach:Reactive Molders masines, yndustriële ynstrumintaasje, Aerospace yndustry, hot melt ferwaarme slang en ensfh
ZXGM131 Thick Wall PTFE Series Spec
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM131-02 | 1/8" | 3 | 0.244 | 6.2 | 0.039 | 1 | 3625 | 250 | 14500 | 1000 | 0.630 | 16 | -1 | |
| ZXGM131-03 | 5/32" | 4 | 0.283 | 7.2 | 0.039 | 1 | 3443.75 | 238 | 13775 | 950 | 0.787 | 20 | -2 | |
| ZXGM131-04 | 3/16" | 5 | 0.323 | 8.2 | 0.039 | 1 | 2972.5 | 205 | 11890 | 820 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM131-05 | 1/4" | 6 | 0.362 | 9.2 | 0.039 | 1 | 2465 | 170 | 9680 | 680 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM131-06 | 5/16" | 8 | 0.453 | 11.5 | 0.039 | 1 | 2356.25 | 163 | 9425 | 650 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM131-08 | 3/8" | 10 | 0.531 | 13.5 | 0.039 | 1 | 1812.5 | 125 | 7250 | 500 | 1.378 | 35 | -6 | ZXTF0-06 |
| ZXGM131-10 | 1/2" | 12 | 0.610 | 15.5 | 0.039 | 1 | 1631.25 | 113 | 6525 | 450 | 3.543 | 90 | -8 | ZXTF0-08 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
Swiere Wall PTFE Series
Binnenbuis: Virgin / Conductive swarte PTFE
Tube muorre dikte: 1mm-2mm (ôfhinklik fan maten)
Fersterkjende laach: Single layer hege trek RVS 304/316 wire braided
Temperatuerberik: -65 ℃ ~ +260 ℃ (-85 ℉ ~ + 500 ℉), hegere temperatuer, legere druk
Eigenskippen:
in.Excellent hege en lege temperatuer ferset
b.Excellent gemyske ferset, oalje ferset
c.Non-sticky, glêd oerflak, lege wriuwing koeffizient
d.Weather & Aging ferset
e.Fleksibeler as standert PTFE glêde bore slang
Oanfraach:Reaktive spuitmasjines, yndustriële ynstrumintaasje, hydraulyske apparatuer, komprimearre gas, Aerospace yndustry, hot melt ferwaarme slang en ensfh.
ZXGM141 Swiere Wall PTFE Series Spec
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM141-05 | 1/4" | 6.5 | 0.394 | 10 | 0.039 | 1 | 2718.75 | 188 | 10875 | 750 | 4.331 | 110 | -4 | ZXTF0-04 |
| ZXGM141-06 | 5/16" | 8 | 0.469 | 11.9 | 0.047 | 1.2 | 2555.625 | 176 | 10222.5 | 705 | 6.299 | 160 | -5 | ZXTF0-05 |
| ZXGM141-08 | 3/8" | 10 | 0.571 | 14.5 | 0.059 | 1.5 | 1993.75 | 138 | 7975 | 550 | 8.268 | 210 | -6 | ZXTF0-06 |
| ZXGM141-10 | 1/2" | 13 | 0.701 | 17.8 | 0.059 | 1.5 | 1815.2 | 125 | 7250 | 500 | 9.843 | 250 | -8 | ZXTF0-08 |
| ZXGM141-12 | 5/8" | 16 | 0.819 | 20.8 | 0.059 | 1.5 | 1413.75 | 98 | 5655 | 390 | 17.323 | 440 | -10 | ZXTF0-10 |
| ZXGM141-14 | 3/4" | 19 | 0.980 | 24.9 | 0.079 | 2 | 1268.75 | 88 | 5075 | 350 | 20.079 | 510 | -12 | ZXTF0-12 |
| ZXGM141-18 | 1" | 25 | 1.224 | 31.1 | 0.079 | 2 | 870 | 60 | 3480 | 240 | 21.220 | 539 | -16 | ZXTF0-16 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
ZXGM101-2W
ZXGM111-2W
Double Braid Hose Series
Binnenbuis: Virgin / Conductive swarte PTFE
Tube muorre dikte: Ofhinklik fan ferskate rige
Fersterkjende laach: Dûbele laach hege trek RVS 304/316 wire braided
Temperatuerberik: -65 ℃ ~ +260 ℃ (-85 ℉ ~ + 500 ℉), hegere temperatuer, legere druk
Eigenskippen:
in.Excellent hege en lege temperatuer ferset
b.Excellent gemyske ferset, oalje ferset
c.Non-sticky, glêd oerflak, lege wriuwing koeffizient
d.Weather & Aging ferset
e.Fleksibeler as standert PTFE glêde bore slang
Applikaasjes: Reaktive ynjeksjefoarmmasines, yndustriële ynstrumintaasje, hydraulyske apparatuer, komprimearre gas, hjitmelt ferwaarme slang en ensfh.
ZXGM101/111/131/141-2W Double Braid Hose Series Spec
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM101-04-2W | 3/16" | 5 | 0.382 | 9.7 | 0.033 | 0.85 | 4350 | 300 | 17400 | 1200 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM101-05-2W | 1/4" | 6.5 | 0.453 | 11.5 | 0.033 | 0.85 | 3987.5 | 275 | 15950 | 1100 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM101-06-2W | 5/16" | 8 | 0.524 | 13.3 | 0.033 | 0.85 | 3552.5 | 245 | 14210 | 980 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM101-07-2W | 3/8" | 10 | 0.575 | 14.6 | 0.033 | 0.85 | 3262.5 | 225 | 13050 | 900 | 1.299 | 33 | -6 | ZXTF0-06 |
| ZXGM101-08-2W | 13/32" | 10.3 | 0.594 | 15.1 | 0.033 | 0.85 | 2791.25 | 193 | 11165 | 770 | 1.811 | 46 | -7 | ZXTF0-06 |
| ZXGM101-10-2W | 1/2" | 13 | 0.740 | 18.8 | 0.039 | 1 | 2356.25 | 163 | 9425 | 650 | 2.598 | 66 | -8 | ZXTF0-08 |
| ZXGM101-12-2W | 5/8" | 16 | 0.870 | 22.1 | 0.039 | 1 | 1885 | 130 | 7450 | 520 | 5.906 | 150 | -10 | ZXTF0-10 |
| ZXGM101-14-2W | 3/4" | 19 | 1.000 | 25.4 | 0.047 | 1.2 | 1558.75 | 108 | 6235 | 430 | 8.898 | 226 | -12 | ZXTF0-12 |
| ZXGM101-16-2W | 7/8" | 22.2 | 1.122 | 28.5 | 0.047 | 1.2 | 1305 | 90 | 5220 | 360 | 9.646 | 245 | -14 | ZXTF0-14 |
| ZXGM101-18-2W | 1" | 25.4 | 1.240 | 31.5 | 0.059 | 1.5 | 1123.75 | 78 | 4495 | 310 | 11.811 | 300 | -16 | ZXTF0-16 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM111-03-2W | 1/8" | 3.5 | 0.303 | 7.7 | 0.039 | 1 | 4350 | 300 | 17400 | 1200 | 0.630 | 16 | -2 | ZXTF0-02 |
| ZXGM111-04-2W | 3/16" | 4.8 | 0.346 | 8.8 | 0.033 | 0.85 | 3443.75 | 237,5 | 13775 | 950 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM111-05-2W | 1/4" | 6.4 | 0.417 | 10.6 | 0.033 | 0.85 | 3081.25 | 212,5 | 12325 | 850 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM111-06-2W | 5/16" | 8 | 0.500 | 12.7 | 0.033 | 0.85 | 2718.75 | 187,5 | 10875 | 750 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM111-07-2W | 3/8" | 10 | 0.579 | 14.7 | 0.033 | 0.85 | 2247,5 | 155 | 8990 | 620 | 1.299 | 33 | -6 | ZXTF0-06 |
| ZXGM111-08-2W | 13/32" | 10.3 | 0.591 | 15 | 0.033 | 0.85 | 2175 | 150 | 8770 | 600 | 1.811 | 46 | -7 | ZXTF0-06 |
| ZXGM111-10-2W | 1/2" | 12.7 | 0.701 | 17.8 | 0.039 | 1 | 1957.5 | 135 | 7830 | 540 | 2.598 | 66 | -8 | ZXTF0-08 |
| ZXGM111-12-2W | 5/8" | 16 | 0.835 | 21.2 | 0.039 | 1 | 1377,5 | 95 | 5510 | 380 | 5.906 | 150 | -10 | ZXTF0-10 |
| ZXGM111-14-2W | 3/4" | 19.2 | 0.976 | 24.8 | 0.047 | 1.2 | 1196.25 | 82,5 | 4785 | 330 | 8.898 | 226 | -12 | ZXTF0-12 |
| ZXGM111-16-2W | 7/8" | 22.2 | 1.098 | 27.9 | 0.047 | 1.2 | 1051.25 | 72,5 | 4205 | 290 | 9.646 | 245 | -14 | ZXTF0-14 |
| ZXGM111-18-2W | 1" | 25 | 1.240 | 31.5 | 0.059 | 1.5 | 870 | 60 | 3480 | 240 | 11.811 | 300 | -16 | ZXTF0-16 |
| ZXGM111-20-2W | 1-1/8" | 28 | 1.378 | 35 | 0.059 | 1.5 | 797,5 | 55 | 3190 | 220 | 23.62 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22-2W | 1-1/4" | 32 | 1.594 | 40,5 | 0.079 | 2 | 688.75 | 47,5 | 2755 | 190 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26-2W | 1-1/2" | 38 | 1.850 | 47 | 0.079 | 2 | 616.25 | 42.5 | 2465 | 170 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32-2W | 2" | 50 | 2.362 | 60 | 0.079 | 2 | 543.75 | 37,5 | 2175 | 150 | 27.559 | 700 | -20 | ZXTF0-32 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM131-02-2W | 1/8" | 3 | 0.291 | 7.4 | 0.039 | 1 | 3987.5 | 275 | 15950 | 1100 | 0.630 | 16 | -1 | |
| ZXGM131-03-2W | 5/32" | 4 | 0.331 | 8.4 | 0.039 | 1 | 3806.25 | 263 | 15225 | 1050 | 0.787 | 20 | -2 | |
| ZXGM131-04-2W | 3/16" | 5 | 0.374 | 9.5 | 0.039 | 1 | 3335 | 230 | 13340 | 920 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM131-05-2W | 1/4" | 6 | 0.421 | 10.7 | 0.039 | 1 | 2827.5 | 195 | 11310 | 780 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM131-06-2W | 5/16" | 8 | 0.512 | 13 | 0.039 | 1 | 2718.75 | 188 | 10875 | 750 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM131-08-2W | 3/8" | 10 | 0.591 | 15 | 0.039 | 1 | 2175 | 150 | 8700 | 600 | 1.378 | 35 | -6 | ZXTF0-06 |
| ZXGM131-10-2W | 1/2" | 12 | 0.669 | 17 | 0.039 | 1 | 1993.75 | 138 | 7975 | 550 | 3.354 | 90 | -8 | ZXTF0-08 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
| Artikelnr. | Binnendiameter | Outer Diameter | Tube Wall Dikte | Wurkdruk | Burst druk | Minimum Bending Radius | Spesifikaasje | Kraag Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM141-05-2W | 1/4" | 6.5 | 0.453 | 11.5 | 0.039 | 1 | 3262.5 | 225 | 13050 | 900 | 4.331 | 110 | -4 | ZXTF0-04 |
| ZXGM141-06-2W | 5/16" | 8 | 0.528 | 13.4 | 0.047 | 1.2 | 3081.25 | 213 | 12325 | 850 | 6.299 | 160 | -5 | ZXTF0-05 |
| ZXGM141-08-2W | 3/8" | 10 | 0.630 | 16 | 0.059 | 1.5 | 2392.5 | 165 | 9570 | 660 | 8.268 | 210 | -6 | ZXTF0-06 |
| ZXGM141-10-2W | 1/2" | 13 | 0.764 | 19.4 | 0.059 | 1.5 | 2175 | 150 | 8700 | 600 | 9.843 | 250 | -8 | ZXTF0-08 |
| ZXGM141-12-2W | 5/8" | 16 | 0.890 | 22.6 | 0.059 | 1.5 | 1703.75 | 118 | 6815 | 470 | 17.323 | 440 | -10 | ZXTF0-10 |
| ZXGM141-14-2W | 3/4" | 19 | 1.047 | 26.6 | 0.079 | 2 | 1522.5 | 105 | 6090 | 420 | 20.097 | 510 | -12 | ZXTF0-12 |
| ZXGM141-18-2W | 1" | 25.4 | 1.307 | 33.2 | 0.079 | 2 | 1051.25 | 73 | 4205 | 290 | 21.220 | 539 | -16 | ZXTF0-16 |
* Oanpaste spesifikaasjes kinne mei ús wurde besprutsen foar detaillearre.
Fynsto net wat jo sykje?
Fertel ús gewoan jo detaillearre easken.It bêste oanbod sil wurde foarsjoen.
Hawwe in spesjale eask?
Algemien hawwe wy mienskiplikPTFE HOSE produktenen grûnstoffen op foarried.Foar jo spesjale fraach biede wy jo ús maatwurktsjinst.Wy akseptearje OEM / ODM.Wy koenen jo logo of merknamme op slang lichem printsje.Foar in krekte offerte moatte jo ús de folgjende ynformaasje fertelle:
