Warshad iib kulul Shiinaha Tuubo bir ah oo aan miridh lahayn oo leh Jic Dheddig End Fixes
Waxaan sii wadnaa niyadda ganacsi ee "Tayada, Hufnaanta, Hal-abuurka iyo Daacadnimada". Waxaan rabnaa inaan u abuurno qiimo dheeraad ah iibsadayaashayada kheyraadkeena barwaaqooba, mashiinno heer sare ah, shaqaale khibrad leh iyo adeegyo heer sare ah oo loogu talagalay Tuubada Iibka Kulul ee Warshadda Shiinaha ee Birta aan Lahayn ee Birta leh oo leh Jic Female End Fittings, Waxaan ka heli doonnaa tayo sare oo ku habboon, heerka ugu tartan badan qaybta, macaamiil kasta oo cusub iyo kuwa duugoobay iyadoo la adeegsanayo bixiyeyaasha ugu fiican deegaanka.
Waxaan sii wadnaa ruuxa ganacsi ee "Tayada, Hufnaanta, Hal-abuurka iyo Daacadnimada". Waxaan rabnaa inaan u abuurno qiimo dheeraad ah iibsadayaashayada kheyraadkeena barwaaqoobay, mashiinno heer sare ah, shaqaale khibrad leh iyo adeegyo heer sare ahShiinaha PTFE Tuubo, Tuubada Heerkulka SareWaxaan bixinaa xalal kala duwan oo ku saabsan aaggan. Intaa waxaa dheer, dalabaadka la habeeyey ayaa sidoo kale la heli karaa. Intaa waxaa dheer, waxaad ku raaxeysan doontaa adeegyadayada heer sare ah. Hal eray, qanacsanaantaadu waa la damaanad qaaday. Ku soo dhawoow inaad booqato shirkaddayada! Wixii macluumaad dheeraad ah, xasuuso inaad timaado boggayaga internetka. Haddii aad wax su'aalo ah qabtid, hubi inaad xor u tahay inaad nala soo xiriirto.
Waa in la isticmaalaa tuubooyinka dhammaadka tuubada PTFE iyo tuubooyinka PTFE ee la dahaadhay. Tuubada ayaa sii kordheysa iyadoo lagu daray waxyaabo lagu daray daxalka, kuwaas oo maanta suuqa yaal shidaal badan. Tuubada waxay leedahay dahaar Teflon ah oo lagu daboolay 308 bir aan miridh lahayn iyo tidco nayloon madow oo dusheeda ah, taasoo abuuraysa muuqaal gaar ah oo xirfad leh. Waxaan sidoo kale haysannaa agabyo gaar ah, kuwaas oo loogu talagalay inay ku habboonaadaan tuubadan. Xitaa waxaan ku ururin karnaa isku-xidhka tuubada sida aad u kala soocayso! Waxaan ku iibinaa tuubadan cag. Inta aad rabto. Tuubada madow ee PTFE oo leh dhexroor gudaha ah oo ah 8 mm iyo dhexroor dibadda ah oo ah 12 mm waxay leedahay cadaadis shaqo oo ah 1100 psi iyo heerkul shaqayn ah oo ah - 100 ilaa 450 darajo Fahrenheit. Tuubada birta aan miridh lahayn ee la dahaadhay waxaa lagu sameeyaa dherer kasta. Waxaan isku daynaa inaan bixinno tirada ugu yar ee isku xidhka tuubada, laakiin tani had iyo jeer ma suurtowdo, tiro kasta oo tuubo la dalbaday waxaa ku jiri kara isku xidhaha. Waxaad dalban kartaa inta cagood ee aad rabto.
Tuubada daloolka siman ee tidcan waxay ka kooban tahay dahaar tuubo oo polytetrafluoroethylene ah oo toosan iyo hal ama laba lakab oo bir ah oo aan miridh lahayn oo dibadda ah. Waa naqshadda aasaasiga ah ee tuubada ptfe. Si guul leh ayaa loogu isticmaalay baabuur badan, daaweynta dareeraha, gaadiidka kiimikada, dahaarka, daawooyinka, habaynta cuntada iyo cabitaanka, qurxinta iyo isticmaalka guud.
Xudunta tuubada waxaa laga sameeyay 100% resin polytetrafluoroethylene saafi ah, iyada oo aan lahayn wax midab ama wax lagu daro ah.
Fiilada tidcan waxaa laga sameeyay silig bir ah oo AISI 304 ama 316 ah.
Dhammaan tuubooyinka waxaa laga heli karaa noocyo ka hortag ah (fiber kaarboon). Fadlan nala soo xiriir wixii faahfaahin ah.
Faahfaahinta Alaabta
Kala duwanaanshaha Tuubada Dheer ee Siman
| Maya. | Dhexroorka gudaha | Dhexroorka dibadda | Derbiga Tuubada Dhumucda | Cadaadiska shaqada | Cadaadiska qaraxa | Gacanka ugu yar ee laabista | Faahfaahinta | cabbirka gacanta | ||||||
| (inji) | (mm±0.2) | (inji) | (mm±0.2) | (inji) | (mm±0.1) | (psi) | (baar) | (psi) | (baar) | (inji) | (mm) | |||
| ZXGM111-03 | 1/8" | 3.5 | 0.220 | 5.6 | 0.039 | 1.00 | 3582 | 247 | 14326 | 988 | 2.008 | 51 | -2 | ZXTF0-02 |
| ZXGM111-04 | 3/16" | 4.8 | 0.315 | 8.0 | 0.033 | 0.85 | 2936 | 203 | 11745 | 810 | 2.953 | 75 | -3 | ZXTF0-03 |
| ZXGM111-05 | 1/4" | 6.4 | 0.362 | 9.2 | 0.033 | 0.85 | 2646 | 183 | 10585 | 730 | 3.189 | 81 | -4 | ZXTF0-04 |
| ZXGM111-06 | 5/16" | 8.0 | 0.433 | 11.0 | 0.033 | 0.85 | 2429 | 168 | 9715 | 670 | 3.622 | 92 | -5 | ZXTF0-05 |
| ZXGM111-07 | 3/8" | 9.5 | 0.512 | 13.0 | 0.033 | 0.85 | 1958 | 135 | 7830 | 540 | 4.331 | 110 | -6 | ZXTF0-06 |
| ZXGM111-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | 1894 | 128 | 7395 | 510 | 5.157 | 131 | -7 | ZXTF0-06 |
| ZXGM111-10 | 1/2" | 12.7 | 0.630 | 16.0 | 0.039 | 1.00 | 2272 | 113 | 6818 | 450 | 7.165 | 182 | -8 | ZXTF0-08 |
| ZXGM111-12 | 5/8" | 16.0 | 0.756 | 19.2 | 0.039 | 1.00 | 1233 | 85 | 4930 | 340 | 8.307 | 211 | -10 | ZXTF0-10 |
| ZXGM111-14 | 3/4" | 19.0 | 0.902 | 22.9 | 0.039 | 1.00 | 1051 | 73 | 4205 | 290 | 13.307 | 338 | -12 | ZXTF0-12 |
| ZXGM111-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.039 | 1.00 | 870 | 60 | 3480 | 240 | 16.575 | 421 | -14 | ZXTF0-14 |
| ZXGM111-18 | 1" | 25.0 | 1.161 | 29.5 | 0.059 | 1.50 | 798 | 55 | 3190 | 220 | 21.220 | 539 | -16 | ZXTF0-16 |
| ZXGM111-20 | 1-1/8" | 28.0 | 1.299 | 33.0 | 0.059 | 1.50 | 725 | 50 | 2900 | 200 | 23.622 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22 | 1-1/4" | 32.0 | 1.496 | 38.0 | 0.079 | 2.00 | 653 | 45 | 2610 | 180 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26 | 1-1/2" | 38.0 | 1.732 | 44.0 | 0.079 | 2.00 | 580 | 40 | 2320 | 160 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32 | 2" | 50.0 | 2.224 | 56.5 | 0.079 | 2.00 | 435 | 30 | 1740 | 120 | 39.961 | 1015 | -32 | ZXTF0-32 |
* Buuxi heerka SAE 100R14.
* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.
Faa'iidada
Tuubada gudaha ee PTFE waxay leedahay taxane sifooyin aad u fiican
1) Isticmaalka muddada dheer ee heerkulka sare ee 200 ~ 260du, heerkulka hooseeya wali waa jilicsan yahay oo qabow u adkaysta-
2) Isticmaalka muddada dheer ee heerkulka sare ee 200 ~ 260du, heerkulka hooseeya wali waa jilicsan yahay oo u adkaysta - 100 ℃;
3) U adkaysta aqua regia iyo dhammaan dareerayaasha dabiiciga ah;
4) Iska caabbinta cimilada ugu fiican ee gabowga balaastikada;
5) Saliid badan, isku-darka ugu yar ee isku-dhafka balaastikada (0.04);
6) Xabag leh xiisad dusha sare ah oo ugu yar iyo walxo adag oo aan lahayn wax ku dheggan walax kasta;
7) Firfircooni la'aan jireed oo aan sun ahayn;
8) Waxqabad koronto oo aad u fiican, waa doorasho ku habboon agabka dahaarka fasalka C.
Fiidiyowga
Na sii Email
sales02@zx-ptfe.com
Su'aal:Ma u isticmaali karaa tan si aan ugu beddelo tuubada PTFE ee ku taal dhammaadka kulul ee prusa I3 MK3-kayga? (e3d v6)
Jawaab:Sida cunaha looga jaray qayb ka mid ah si loogu geliyo dhammaadka kulul? Ma garanayo sababta aan u sameyn karin.
MK3 iyo in ka badan MK3 waxay isticmaalaan darafyo la jarjaray iyo kuwa la soo celiyay. Haddii aad samayn karto isbeddelladan, waa inay si fiican u shaqeeyaan.
Su'aal:Kani ma tuubo dhab ah oo Capricorn ah baa?
Jawaab:Haa, liiskan waxaa loogu talagalay tuubada Capricorn ee dhabta ah. Hubi inaad ka dalbato iibiye idman.
Su'aal: Ma lagama maarmaan baa in la isticmaalo qalab jarid, mise waxaa lagu samayn karaa tusaale iyo gacan deggan?
Jawaab: Qalabka jarista ayaa fududeeya, laakiin mindi ama wax sax ah ayaa shaqada ka dhigi doona mid fudud! ha welwelin. Way fududahay in la jaro. Mandiil aad u fiiqan ayaa shaqeeya, laakiin qalabka jarista tuubooyinka ayaa ugu fiican.
Waxaan bixinaa baakadaha caadiga ah sida soo socota
1, Bac naylon ah ama bac poly ah
2, Sanduuqa kartoonka
3. Baalal balaastig ah ama balaastig alwaax ah
Baakad la habeeyey ayaa la dallacayaa
1, Giraangiraha alwaaxa ah
2, Kiis alwaax ah
3, Baakado kale oo la habeeyey ayaa sidoo kale la heli karaa
