Tuubada Daabacaha 3D ee PTFE - Soo-saareyaasha iyo Alaab-qeybiyeyaasha Shiinaha | BESTEFLON

Tuubada Daabacaha 3D ee PTFE - Soo-saareyaasha iyo Alaab-qeybiyeyaasha Shiinaha | Sawirka Featured BESTEFLON

Sharaxaad Gaaban:

Soo saarista Besteflon tayo sare lehDaabacaha 3D tuubada PTFE, si loogu isticmaalo qalabka wax lagu dhejiyo. Tuubadan waxay ku habboon tahay daabacayaasha 3D ee fiilada 1.75mm oo leh dhexroor gudaha ah oo ah 2mm. Tuubooyinka PTFE waxaa loo isticmaalaa in lagu hago fiiladaada iyada oo loo marayo jirka qalabka wax lagu dhejiyo ilaa dhamaadka ugu fiican. Iibka tooska ah ee Warshadda Shiinaha, oo taageeraya habaynta, qiimo dhimis weyn.

Qiimaha:50-499 Mitir:$0.88;>=500 Mitir:$0.88

Muunado:$2.00 /Mitir, 1 Mitir (Dalbashada Ugu Yar): Iibso Muunado

Habayn:Baakad la habeeyey (Dalbashada ugu Yar: 500 Mitir)

Lacag bixinta:T/T

Noo soo dir emayl Soo dejiso sida PDF ahaan

Faahfaahinta Badeecada

Baakad

Calaamadaha Alaabta

PTFE waa fluoropolymer is jiidjiid hooseeya oo leh iska caabin kiimiko oo sare iyo iska caabin koronto.

Tuubooyinka PTFE ee Besteflon oo ah 2 x 4mm, oo sidoo kale loo yaqaan tuubooyinka Bowden, waxaa laga sameeyay PTFE bikrad ah waxayna ku habboon yihiin daabacayaasha 3D si loogu isticmaalo fiilada 1.75mm. Waxaan bixinaa tuubooyinka PTFE oo leh dhowr midab oo caan ah.

Waxaa lagu soo saaraa xaalado aad loo xakameeyey si loo bixiyo waxqabad joogto ah oo la isku halleyn karo. Astaamaha ugu muhiimsan ee tuubooyinka PTFE ee loo isticmaalo daabacayaasha 3D waa isticmaalka heerkulka sare, cimriga dheer, is jiidjiid hoose - simbiriirixan sare, fududaynta nadiifinta iyo dabacsanaanta.

Tuubo PTFE ah oo Virgin ah oo loogu talagalay in lagu xiro fiilooyinka matoorka ilaa qalabka wax lagu shubo iyo batteriga birta cayriin ee ku jira baloogga dhamaadka kulul.

Tilmaamaha tuubooyinka PTFE ee daabacaha 3D

Qalabka: PTFE

Aqoonsiga: 2mm

OD: 4mm

Dhererka: 1m

Isku-dhafka Is-qabsiga (qalalan oo bir ah): 0.05-0.2

Heerkulka Shaqada: Ilaa 260℃

Afar cabbir oo kala duwan oo caadi ah

Aqoonsiga 2mm, 4mm OD

Aqoonsiga 2mm, 3mm OD

Aqoonsiga 3mm, 4mm OD

Aqoonsiga 4mm, 6mm OD

Faa'iidada tuubooyinka PTFE ee daabacaadda 3D

Hagaaji daabacaadda

Nadiifinta joogtada ah ee tuubooyinka Bowden waxay sababi kartaa duugo, shiididda qalabka wax lagu duubo waxay yareyn kartaa tayada daabacaadda. Beddel tuubada fiilada si aad u horumariso tayada daabacaadda.

Khilaaf Hoose

PTFE waxay leedahay isku-darka ugu hooseeya ee is-jiidjiidka, tuubada PTFE Bowden waxay u oggolaanaysaa fiilada inay si fiican u simbiriirixanto si ay u hesho natiijooyin siman.

Tuubo dabacsan

Tuubooyinka PTFE Bowden waxay bixiyaan dabacsanaan cajiib ah.

Alaab

Waxaa laga sameeyay budo PTFE ah oo 100% bikro ah.

Ku habboon

Fiilada 1.75mm.

PTFE waxay leedahay astaamo u adkeysiga heerkulka sare, iska caabbinta korontada, iska caabbinta aashitada iyo alkali, iska caabbinta dhegdheg iyo iska caabbinta xirashada. Si ballaaran ayaa loogu isticmaalaa mashiinnada, qalabka elektaroonigga ah, kiimikooyinka, isgaarsiinta iyo warshadaha kale.

Tuubooyinkan PTFE waa casriyeyn degdeg ah oo loogu talagalay rakibidda daabacaha 3D kasta, maadaama maaddada tuubada is jiidjiidka ee aadka u hooseysa ay u oggolaanayso fiilooyinka inay si habsami leh ugu socdaan qalabka wax soo saara iyo dhammaadka kulul, taasoo ka hortagaysa xirmidda iyo dhibaatooyinka ku saabsan hoos u dhigista.

Beddelka tuubada daabacaha 3D:

Waxay qaadataa dhowr daqiiqo oo keliya, si dhakhso leh oo fudud loo samayn karo.

Haddii aad dhibaato qabto, fiiladaadu way xayiran tahay, qalabkaaga wax lagu shubo ayaa shiidaya dhamaadka tuubada, ama tuubadaadu way duugowday ama way qudhuntay, beddelida tuubada waxay kordhin kartaa hufnaanta daabacahaaga 3D waxayna yareyn kartaa waqtiga daabacaadda iyada oo ay ugu wacan tahay nadiifinta joogtada ah.

Wixii faahfaahin dheeraad ah, fadlan tixraac xiriirka hoose ee tilmaamaha:

Tuubada PTFE Sida Loo Nadiifiyo

SIDA LOOGA SARO TUUBADA PTFE

Faahfaahinta Alaabta

Magaca Summada:	BESTEFLON
Midabka:	cadaan caano leh / hufan / madow / buluug / sida waafaqsan shuruudahaaga
Faahfaahinta:	2x4mm, 2x3mm, 3x4mm, 4x6mm
Dhumucda:	1mm ama 0.5mm
Qalabka:	100% PTFE bikrad ah
Heerkulka Shaqada:	-65℃-+260℃
Codsiga:	Daabacaha 3D
Nooca Ganacsiga:	Soo-saare/Warshad
Heerka:	ISO9001, FDA, RoHS, SDS

Kala duwanaanshaha Cabbirka Tuubada Siman

Maya.	Faahfaahinta	Dhexroorka dibadda		Dhexroorka gudaha		Dhumucda Darbiga Tuubada		Cadaadiska shaqada		Cadaadiska qaraxa
Maya.	Faahfaahinta	mm	(inji)	mm	(inji)	mm	(inji)	(psi)	(baar)	(psi)	(baar)
1	1/8"*1/16"	3.17	0.125	1.58	0.062	0.8	0.031	218	15.0	725	50
2	3/16"*1/8"	4.76	0.187	3.17	0.125	0.8	0.031	174	12.0	638	40
3	1/4"*3/16"	6.35	0.250	4.76	0.187	0.8	0.031	131	9.0	464	32
4	5/16"*1/4"	7.93	0.312	6.35	0.250	0.8	0.031	102	7.0	363	25
5	3/8"*1/4"	9.52	0.357	6.35	0.250	1.5	0.059	174	12.0	638	44
6	3/8"* 5/16"	9.52	0.357	7.93	0.312	0.8	0.031	87	6.0	319	22
7	1/2"*3/8"	12.7	0.500	9.6	0.378	1.5	0.059	131	9.0	464	32
8	5/8"*1/2"	15.87	0.625	12.7	0.500	1.5	0.059	102	7.0	363	25
9	3/4"*5/8"	19.05	0.750	15.87	0.625	1.5	0.059	87	6.0	319	22

* Buuxi heerka SAE 100R14.

* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.

Tuubada Siman ee Imperial Range

Maya.	Faahfaahinta	Dhexroorka dibadda		Dhexroorka gudaha		Dhumucda Darbiga Tuubada		Cadaadiska shaqada		Cadaadiska qaraxa
Maya.	Faahfaahinta	mm	(inji)	mm	(inji)	mm	(inji)	(psi)	(baar)	(psi)	(baar)
1	2 * 4	4	0157	2	0.079	1	0.039	148	10.2	444	30.6
2	3 * 5	5	0.197	3	0.118	1	0.039	148	10.2	444	30.6
3	4 * 6	6	0.236	4	0.157	1	0.039	148	10.2	444	30.6
4	5 * 7	7	0.276	5	0.197	1	0.039	148	10.2	444	30.6
5	6 * 8	8	0.315	6	0.236	1	0.039	148	10.2	444	30.6
6	8*10	10	0.394	8	0.315	1	0.039	148	10.2	444	30.6
7	10 * 12	12	0.472	10	0.394	1	0.039	118	8.16	370	25.5
8	12 * 14	14	0.551	12	0.472	1	0.039	118	8.16	370	25.5
9	14 * 16	16	0.630	14	0.551	1	0.039	118	8.16	370	25.5
10	16 * 18	18	0.709	16	0.630	1	0.039	118	8.16	370	25.5
11	20 * 24	24	0.945	20	0.787	2	0.079	74	5.1	296	20.4
12	50 * 54	54	2.126	50	1.969	2	0.079	74	5.1	296	20.4