nke China 3D ngwa nbipute PTFE tube nri Line ID 2mm OD 4mm |BESTEFLON ụlọ ọrụ mmepụta ihe na suppliers |Besteflon
English

3D ngwa nbipute PTFE Tube Nri Line ID 2mm OD 4mm |BESTFLON

3D ngwa nbipute PTFE Tube Nri Line ID 2mm OD 4mm |BESTEFLON Foto egosipụtara
  • 3D ngwa nbipute PTFE Tube Nri Line ID 2mm OD 4mm |BESTFLON
  • 3D ngwa nbipute PTFE Tube Nri Line ID 2mm OD 4mm |BESTFLON
  • 3D ngwa nbipute PTFE Tube Nri Line ID 2mm OD 4mm |BESTFLON

Nkọwa dị mkpirikpi:

Na ngwa nbipute 3D,PTFE tubesA na-ejikwa ọtụtụ ebe maka mkpuchi nke tubes isi extruder, yana uru ndị a:

1. Meziwanye mbipụta: ihicha nke tubes Bowden mgbe niile nwere ike ime ka ọ ghara ịdị na-eyi, na ichigharị extruder na-ebelata ogo mbipụta.Dochie tube filament iji kwalite ogo mbipụta.

  1. Esemokwu dị ala: Mere nke dị elu, PTFE na-adịgide adịgide, PTFE Bowden tube na-enye ohere ka filament slide maka nsonaazụ kacha mma.
  2. Nkọwa dị elu: na-eguzogide 260 ℃, njikọ Bowden a nwere njupụta tubing nke 2.15-2.20g / cm3, dayameta n'ime 2mm na dayameta 4mm.
  3. Tubing na-agbanwe agbanwe: PTFE Bowden Tubing na-enye mgbanwe dị egwu - dị mma maka nleba anya nke ọma nke isi nbipute 3D na-akpụ akpụ.Ajuju na-enweghị njikọ zip iji gbochie curling.
  • Okpomọkụ nso: -65℃ ~ +260℃
  • Nkọwapụta: 2*4mm
  • Ọkpụrụkpụ: 1mm
  • Agba: Blue, White, Black, Red, na ndị ọzọ
  • Ahịa: ID 2mm*OD 4mm: $0.45


  • Oke okpomọkụ:-65 ℃ ~ +260 ℃
  • Nkọwapụta:2 * 4mm, 3 * 5mm
  • Ọkpụrụkpụ:1mm
  • Agba:Blue, White, Black, Ndị ọzọ
  • Ọnụ ahịa:NJ 2mm*OD 4mm:$0.45, NJ 3mm*OD 5mm:$0.59
    • Budata dị ka PDF

    Nkọwa ngwaahịa

    FAQ

    Nkwakọ ngwaahịa

    Mkpado ngwaahịa

    Ọtụtụ n'ime isi akụrụngwa ejiri naPTFE tube.N'ihi na injinia ọkwa ihe chọrọ elu na-aga n'ihu okpomọkụ, ihe ndị chọrọ maka components dị nnọọ elu.Ya mere, ngwa nbipute 3D na-ahọrọPTFE tubedị ka feeder tube, na-agbakwụnye ihe dịpụrụ adịpụ n'etiti oyi akwa n'etiti PTFE tube na kpo oku.

    BESTEFlon na-enye3D ngwa nbipute PTFE tubena abụọ nkọwa: n'ime dayameta 2mm * elu dayameta 4mm, n'ime dayameta 3mm * elu dayameta 5mm.Njirimara nke enweghị nrapara, elu okpomọkụ na-eguzogide na ogologo ọrụ ndụ nke PTFE tube izute chọrọ nke 3D ngwa nbipute.Iji ngwa nbipute ptfe3d nwere ike zere nsogbu nke nnọchi tube ugboro ugboro.

    PTFE tube ahịrị nriMelite ogo mbipụta gị wee jiri eriri njikọ eriri PTFE na-acha uhie uhie, ọcha na acha anụnụ anụnụ mee ihe nbipute 3D gị.

    adịchaghịPTFE

    Ejiri PTFE siri ike, na-adịgide adịgide ma na-agbanwe agbanwe, tubes PTFE Bowden ndị a bụ nkwalite ngwa ngwa maka ntọala ngwa nbipute 3D ọ bụla n'ihi ihe ọkpọkọ ọkpọkọ dị oke ala nke na-enye ohere ka filament gafere n'etiti extruder na njedebe na-ekpo ọkụ na-eme njem nke ọma ma gbochie mgbochi na nsogbu. tuo.Ọkpụkpọ njikọ agba dị ugbu a na uhie, ọcha ma ọ bụ anụnụ anụnụ.

    Nkọwa dị eluntinyeỌkụkụ

    AnyịPTFEtubing njikọ nwere ike iguzogide okpomọkụ dị ka -180 ℃ ruo elu dị ka 260 ℃, na-eme ka ọ bụrụ ihe nchekwa dị mma maka ndị na-ebi akwụkwọ 3D.tubing dabara adaba nwere oke nrụgide nke 8kgs/cm2 yana njupụta nke 2.15-2.20g/cm3.Ezubere maka 1.75mm filament, eriri njikọ nwere ID 2mm na 4mm OD.

    Sime iheRmbughari

    Dochie tube Bowden maka ngwa nbipute 3D na-ewe naanị nkeji ole na ole ma enwere ike ịme ya ngwa ngwa na ngwa ngwa.Ọ bụrụ na ị nwere nsogbu, filament gị na-arapara n'ahụ, njedebe ihe igwe extruder gị, ma ọ bụ tubing gị aghọwo ihe eyi ma ọ bụ mebie ya, dochie tubing nwere ike ịbawanye arụmọrụ nke ngwa nbipute 3D gị ma belata oge mbipụta n'ihi nhicha mgbe niile.

    Nkọwa ngwaahịa

    Aha ika: BESTFLON
    Agba: milky ọcha / translucent / nwa / acha anụnụ anụnụ / ọbara ọbara / ma ọ bụ dị ka gị chọrọ
    Nkọwapụta: ID 2mm*OD 4mm
    Ọkpụrụkpụ: 1mm
    Ihe: 100% PTFE na-amaghị nwoke
    Oke okpomọkụ na-arụ ọrụ: -65 ℃ - + 260 ℃
    Ngwa: Ihe nbipute 3D
    Ụdị azụmahịa:

    Onye nrụpụta/Ụlọ ọrụ mmepụta ihe
    Ọkọlọtọ: ISO9001

     

    Ogologo metric dị nro

    Mba. Nkọwapụta
    		 Dayameta dị n'èzí Dayameta dị n'ime Ọkpụrụkpụ Tube Tube Nrụgide ọrụ Nrụgide mgbawa
    mm (inch) mm (inch) mm (inch) (psi) (ụlọ mmanya) (psi) (ụlọ mmanya)
    1 1/8 "* 1/16" 3.17 0.125 1.58 0.062 0.8 0.031 218 15.0 725 50
    2 3/16 "* 1/8" 4.76 0.187 3.17 0.125 0.8 0.031 174 12.0 638 40
    3 1/4 "* 3/16" 6.35 0,250 4.76 0.187 0.8 0.031 131 9.0 464 32
    4 5/16 "* 1/4" 7.93 0,312 6.35 0,250 0.8 0.031 102 7.0 363 25
    5 3/8 "* 1/4" 9.52 0,357 6.35 0,250 1.5 0,059 174 12.0 638 44
    6 3/8"*5/16" 9.52 0,357 7.93 0,312 0.8 0.031 87 6.0 319 22
    7 1/2 "* 3/8" 12.7 0,500 9.6 0,378 1.5 0,059 131 9.0 464 32
    8 5/8 "* 1/2" 15.87 0,625 12.7 0,500 1.5 0,059 102 7.0 363 25
    9 3/4 "* 5/8" 19.05 0,750 15.87 0,625 1.5 0,059 87 6.0 319 22

    * Enwere ike ịkọrọ anyị ngwaahịa ndị ahịa akọwapụtara maka nkọwa zuru ezu.

    Obere tubing Imperial Range

    Mba. Nkọwapụta
    		 Dayameta dị n'èzí Dayameta dị n'ime Ọkpụrụkpụ Tube Tube Nrụgide ọrụ Nrụgide mgbawa
    mm (inch) mm (inch) mm (inch) (psi) (ụlọ mmanya) (psi) (ụlọ mmanya)
    1 2*4 4 0157 2 0,079 1 0,039 148 10.2 444 30.6
    2 3*5 5 0.197 3 0.118 1 0,039 148 10.2 444 30.6
    3 4*6 6 0,236 4 0,157 1 0,039 148 10.2 444 30.6
    4 5*7 7 0,276 5 0.197 1 0,039 148 10.2 444 30.6
    5 6*8 8 0,315 6 0,236 1 0,039 148 10.2 444 30.6
    6 8*10 10 0,394 8 0,315 1 0,039 148 10.2 444 30.6
    7 10*12 12 0,472 10 0,394 1 0,039 118 8.16 370 25.5
    8 12*14 14 0,551 12 0,472 1 0,039 118 8.16 370 25.5
    9 14*16 16 0,630 14 0,551 1 0,039 118 8.16 370 25.5
    10 16*18 18 0,709 16 0,630 1 0,039 118 8.16 370 25.5
    11 20*24 24 0,945 20 0,787 2 0,079 74 5.1 296 20.4
    12 50*54 54 2.126 50 1.969 2 0,079 74 5.1 296 20.4

    Mụtakwuo maka ngwaahịa BESTEFlon

    ptfe tube

    https://www.besteflon.com/ptfe-heat-shrinkable-tube-besteflon-product/

    PTFE TUBING

    https://www.besteflon.com/convoluted-ptfe-tubing-316-14-516-38-12-58-34-78-1-1-1-12-2-besteflon-product/

    Ptfe Convoluted tubing

    PTFE convoluted tube na-agbanwe agbanwe

    Gụkwuo ozi

    1.Kedu ihe bụ ọrụ nke tube PTFE nwere ngwa nbipute 3d

    2.Kedu otu esi etinye PTFE Tube?

    3.Gịnị mere Hot Ends nwere Ptfe tube

    4.Otu esi ewepụ PTFE Tube

    5.Otu esi ebipụ tubing PTFE

    6.Otu esi ewepu PTFE TUBE

    Vidiyo

    Nye anyị ozi-e

    sales02@zx-ptfe.com


    https://www.besteflon.com/tube-ptfe-id-2mmod-4mm-for-3d-printer-besteflon-product/


  • Nke gara aga:
  • Osote:

    • 　　Ajụjụ:ole ibu ọkpọkọ?

    　　Azịza:nkọwapụta izugbe nke ọkpọkọ nri ejiri na ngwa nbipute 3D bụ id2mm * od4mm ma ọ bụ id3mm * od5mm.

    　　Ajụjụ:Enwere m ike iji nke a dochie ptfe na nsọtụ ọkụ m?

    　Azịza:Ee, ị nwere ike, naanị ị ga-akpụ akpụ nke ọma ka ogologo nwere ike ịchọ ime obere ọdụ ka ị bee otu oge ọ bụla.

    1,ptfe tube 3d ngwa nbipute okpomọkụ

    Azịza: 65℃-+260℃

    2, otú iji ptfe tube na 3d obibi

    Azịza: A na-eji ya dị ka Long Distance Nozzle feed tube nke ngwa nbipute 3D

    3, otú ịgbanwe ptfe tube na 3d ngwa nbipute

    Kwupu njikọ dabara adaba na tubing PTFE, wee jikọọ tubing ọhụrụ na akwa akwa na ngwa nbipute 3D.

    4, otú ihichapụ a clogged ptfe tube maka 3d ngwa nbipute

    Ihe dị na akpịrị nke ngwa nbipute PTFE 3D ga-egbochi mmegharị nke filament dị nro.Hichaa tube nke ngwa nbipute PTFE 3Ddịkarịa ala otu ugboro n'ọnwa, ma ọ bụ mgbe na-ezute filament egweri nsogbu.Iji hichaa tube nke ngwa nbipute PTFE 3D, a ga-ewepụ ya na ngwa nbipute.

    5, kedu ihe bụ ptfe tube maka ngwa nbipute 3d

    "Ọtụtụ n'ime isi ihe eji eme ihe na tube PTFE.N'ihi na injinia ọkwa ihe chọrọ elu na-aga n'ihu okpomọkụ, ihe ndị chọrọ maka components dị nnọọ elu.Ya mere, 3D ngwa nbipute na-ahọrọ PTFE tube dị ka feeder tube, na-agbakwụnye ihe dịpụrụ adịpụ n'etiti oyi akwa n'etiti PTFE tube na kpo oku.

    BESTEFLON na-enye 3D ngwa nbipute PTFE tube na abụọ nkọwa: n'ime dayameta 2mm * elu dayameta 4mm, n'ime dayameta 3mm * elu dayameta 5mm.Njirimara nke enweghị nrapara, elu okpomọkụ na-eguzogide na ogologo ọrụ ndụ nke PTFE tube izute chọrọ nke 3D ngwa nbipute.Ojiji nke ngwa nbipute ptfe3d nwere ike zere nsogbu nke nnọchi tube ugboro ugboro. ”more….

    6, 3d obibi ihe size ptfe tube

    PTFE Tube Kedu ka esi ehicha?

    Ihe dị na akpịrị nke ngwa nbipute PTFE 3D ga-egbochi mmegharị nke filament dị nro.Hichaa tube nke 3D ngwa nbipute Ptfe tube dịkarịa ala otu ugboro n'ọnwa, ma ọ bụ mgbe osobo filament egweri nsogbu.PTFE Tube Otu esi ehicha?

    nkwakọ ngwaahịankwakọ ngwaahịa

    Anyị na-enye nkwakọ ngwaahịa mbụ dị ka ndị a

    1, akpa nylon ma ọ bụ akpa poly

    2, igbe igbe

    3, Plastic pallet ma ọ bụ plywood pallet

    A na-ana ebubo nkwakọ ngwaahịa ahaziri ahazi

    1. Osisi osisi

    2. Osisi osisi

    3. Ndị ọzọ ahaziri nkwakọ dịkwa

    Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa

    Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya