Khadka Quudinta Tuubada PTFE ee Daabacaha 3D ID 2mm OD 4mm | BESTFLON
Qaar badan oo ka mid ah astaamaha muhiimka ah ee loo isticmaalo soo saarista dahabkaTuubada PTFEMaadaama agabka heerka injineernimada ay u baahan yihiin heerkul joogto ah oo sarreeya, shuruudaha qaybaha aad ayay u sarreeyaan. Sidaa darteed, daabacaha 3D wuxuu doortaaTuubada PTFEsida tuubada quudinta, waxayna ku dartaa lakab dhexe oo go'doonsan oo u dhexeeya tuubada PTFE iyo kuleyliyaha.
BESTEFLON waxay bixisaaDaabacaha 3D tuubada PTFEoo leh laba qeexitaan: dhexroor gudaha ah 2mm * dhexroor dibadda ah 4mm, dhexroor gudaha ah 3mm * dhexroor dibadda ah 5mm. Astaamaha aan dhegdheg lahayn, iska caabbinta heerkulka sare iyo cimriga dheer ee adeegga tuubada PTFE waxay buuxinayaan shuruudaha daabacaha 3D. Isticmaalka daabacaha ptfe3d wuxuu ka fogaan karaa dhibaatada beddelka tuubada ee soo noqnoqda.
Tuubada PTFEKhadka Quudinta eHagaaji tayada daabacaaddaada oo u labbiso daabacahaaga 3D tuubooyinka isku xira fiilooyinka PTFE ee casaanka, caddaanka iyo buluugga ah.
PremiumPTFE
Tuubooyinkan PTFE Bowden oo laga sameeyay PTFE adag, waara oo dabacsan, waa casriyeyn degdeg ah oo loogu talagalay dejinta daabacaha 3D sababtoo ah walxaha tuubooyinka is jiidjiidka ee aadka u hooseeya ee u oggolaanaya fiilada inay dhex marto qalabka wax lagu dhejiyo iyo dhammaadka kulul. Si habsami leh ayay u socotaa waxayna ka hortagtaa xirmidda iyo dhibaatada qanjaruufada. Tuubooyinka isku xira midabada leh hadda waxaa laga heli karaa casaan, caddaan ama buluug.
Tilmaamaha SarecaddeyntaTuubooyinka
AnnagaPTFETuubada isku xidhka waxay u adkaysan kartaa heerkulka ugu hooseeya -180℃ ilaa ugu sarreeya 260℃, taasoo ka dhigaysa mid ku habboon daabacayaasha 3D. Tuubada ku habboon Bowden waxay leedahay cadaadis ugu badan oo ah 8kgs/cm2 iyo cufnaanta 2.15-2.20g/cm3. Tuubada isku xidhka waxaa loogu talagalay fiilada 1.75mm, waxayna leedahay aqoonsi 2mm ah iyo 4mm OD ah.
SfulinRmeelaynta
Beddelka tuubada Bowden ee daabacaadda 3D waxay qaadataa dhowr daqiiqo oo keliya waxaana lagu samayn karaa si dhakhso ah oo fudud. Haddii aad dhibaato qabto, fiiladaadu way xayiran tahay, dhamaadka mashiinkaaga wax lagu dhejiyo, ama tuubadaadu way duugowday ama way qudhuntay, beddelidda tuubada waxay kordhin kartaa hufnaanta daabacahaaga 3D waxayna yarayn kartaa wakhtiga daabacaadda sababtoo ah nadiifinta joogtada ah.
Faahfaahinta Alaabta
| Magaca Summada: | BESTEFLON |
| Midabka: | Caddaan caano leh/ dhalaal/madow/buluug/cas/ ama sida aad u baahan tahay |
| Faahfaahinta: | Aqoonsiga 2mm*OD 4mm |
| Dhumucda: | 1mm |
| Qalabka: | 100% PTFE bikrad ah |
| Heerkulka Shaqada: | -65℃-+260℃ |
| Codsiga: | Daabacaha 3D |
| Nooca Ganacsiga: | Soo-saare/Warshad |
| Heerka: | ISO9001 |
Kala duwanaanshaha Cabbirka Tuubada Siman
| Maya. | Faahfaahinta | Dhexroorka dibadda | Dhexroorka gudaha | Dhumucda Darbiga Tuubada | Cadaadiska shaqada | Cadaadiska qaraxa | |||||
| mm | (inji) | mm | (inji) | mm | (inji) | (psi) | (baar) | (psi) | (baar) | ||
| 1 | 1/8"*1/16" | 3.17 | 0.125 | 1.58 | 0.062 | 0.8 | 0.031 | 218 | 15.0 | 725 | 50 |
| 2 | 3/16"*1/8" | 4.76 | 0.187 | 3.17 | 0.125 | 0.8 | 0.031 | 174 | 12.0 | 638 | 40 |
| 3 | 1/4"*3/16" | 6.35 | 0.250 | 4.76 | 0.187 | 0.8 | 0.031 | 131 | 9.0 | 464 | 32 |
| 4 | 5/16"*1/4" | 7.93 | 0.312 | 6.35 | 0.250 | 0.8 | 0.031 | 102 | 7.0 | 363 | 25 |
| 5 | 3/8"*1/4" | 9.52 | 0.357 | 6.35 | 0.250 | 1.5 | 0.059 | 174 | 12.0 | 638 | 44 |
| 6 | 3/8"* 5/16" | 9.52 | 0.357 | 7.93 | 0.312 | 0.8 | 0.031 | 87 | 6.0 | 319 | 22 |
| 7 | 1/2"*3/8" | 12.7 | 0.500 | 9.6 | 0.378 | 1.5 | 0.059 | 131 | 9.0 | 464 | 32 |
| 8 | 5/8"*1/2" | 15.87 | 0.625 | 12.7 | 0.500 | 1.5 | 0.059 | 102 | 7.0 | 363 | 25 |
| 9 | 3/4"*5/8" | 19.05 | 0.750 | 15.87 | 0.625 | 1.5 | 0.059 | 87 | 6.0 | 319 | 22 |
* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.
Tuubada Siman ee Imperial Range
| Maya. | Faahfaahinta | Dhexroorka dibadda | Dhexroorka gudaha | Dhumucda Darbiga Tuubada | Cadaadiska shaqada | Cadaadiska qaraxa | |||||
| mm | (inji) | mm | (inji) | mm | (inji) | (psi) | (baar) | (psi) | (baar) | ||
| 1 | 2 * 4 | 4 | 0157 | 2 | 0.079 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 2 | 3 * 5 | 5 | 0.197 | 3 | 0.118 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 3 | 4 * 6 | 6 | 0.236 | 4 | 0.157 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 4 | 5 * 7 | 7 | 0.276 | 5 | 0.197 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 5 | 6 * 8 | 8 | 0.315 | 6 | 0.236 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 6 | 8*10 | 10 | 0.394 | 8 | 0.315 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 7 | 10 * 12 | 12 | 0.472 | 10 | 0.394 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 8 | 12 * 14 | 14 | 0.551 | 12 | 0.472 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 9 | 14 * 16 | 16 | 0.630 | 14 | 0.551 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 10 | 16 * 18 | 18 | 0.709 | 16 | 0.630 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 11 | 20 * 24 | 24 | 0.945 | 20 | 0.787 | 2 | 0.079 | 74 | 5.1 | 296 | 20.4 |
| 12 | 50 * 54 | 54 | 2.126 | 50 | 1.969 | 2 | 0.079 | 74 | 5.1 | 296 | 20.4 |
Wax badan ka baro badeecooyinka BESTFLON
Fiidiyowga
Na sii Email
sales02@zx-ptfe.com
Su'aal:Tuubada intee le'eg ayay le'eg tahay?
Jawaab:Tilmaamaha guud ee tuubada quudinta ee loo isticmaalo daabacaadda 3D waa id2mm * od4mm ama id3mm * od5mm.
Su'aal:Ma u isticmaali karaa tan si aan ugu beddelo ptfe-ga darafyadeyda kulul?
Jawaab:Haa, waad awoodaa, kaliya waa inaad si taxaddar leh u jartaa dhererka laga yaabee inaad rabto inaad sameyso saldhig yar si aad mar kasta isku mid u jarto.
1, heerkulka daabacaha ptfe tube 3D
Jawaab: 65℃-+260℃
2, sida loo isticmaalo tuubada ptfe ee daabacaadda 3D
Jawaab: Waxaa loo isticmaalaa tuubo quudin ah oo masaafada dheer ah oo daabacaha 3D ah
3, sida loo beddelo tuubada ptfe ee daabacaha 3D
Kala fur tuubada ku habboon iyo tuubada PTFE, ka dibna ku xidh tuubada cusub iyo qalabka ku rakiban daabacaha 3D.
4, sida loo nadiifiyo tuubo ptfe ah oo xiran oo loogu talagalay daabacaha 3D
Walxaha ku jira cunaha daabacaha PTFE 3D waxay carqaladeyn doonaan dhaqdhaqaaqa siman ee fiilooyinka.Nadiifi tuubada daabacaha PTFE 3Dugu yaraan bishiiba mar, ama ka dib marka aad la kulanto dhibaatooyin shiidid fiilooyinka. Si aad u nadiifiso tuubada daabacaha PTFE 3D, waa in laga saaraa daabacaha.
5, waa maxay tuubada ptfe ee daabacaha 3D?
"Qaybo badan oo muhiim ah oo loo isticmaalo tuubada PTFE. Maadaama agabka heerka injineernimada ay u baahan yihiin heerkul joogto ah oo sarreeya, shuruudaha qaybaha aad bay u sarreeyaan. Sidaa darteed, daabacaha 3D wuxuu tuubada PTFE u doortaa tuubada quudinta, wuxuuna ku daraa lakab dhexe oo go'doonsan oo u dhexeeya tuubada PTFE iyo kuleyliyaha.
BESTEFLON waxay bixisaa tuubo daabace 3D ah oo PTFE ah oo leh laba qeexitaan: dhexroor gudaha ah 2mm * dhexroor dibadda ah 4mm, dhexroor gudaha ah 3mm * dhexroor dibadda ah 5mm. Astaamaha aan dhegdheg lahayn, iska caabbinta heerkulka sare iyo cimriga dheer ee tuubada PTFE waxay buuxinayaan shuruudaha daabacaha 3D. Isticmaalka daabacaha ptfe3d wuxuu ka fogaan karaa dhibaatada beddelka tuubada soo noqnoqda. "Wax badan…..."
6, daabacaadda 3D cabbirka tuubada ptfe
Tuubada PTFE Sidee loo nadiifiyaa?
Walxaha ku jira cunaha daabacaha PTFE 3D waxay carqaladeyn doonaan dhaqdhaqaaqa siman ee fiilooyinka. Nadiifi tuubada Daabacaha 3D Ptfe Tube ugu yaraan hal mar bishii, ama ka dib markaad la kulanto dhibaatooyin shiidi fiilooyinka.Tuubada PTFE Sida Loo Nadiifiyo?
Waxaan bixinaa baakadaha caadiga ah sida soo socota
1, Bac naylon ah ama bac poly ah
2, Sanduuqa kartoonka
3. Baalal balaastig ah ama balaastig alwaax ah
Baakad la habeeyey ayaa la dallacayaa
1, Giraangiraha alwaaxa ah
2, Kiis alwaax ah
3, Baakado kale oo la habeeyey ayaa sidoo kale la heli karaa
