Akụkọ - FKM Rubber vs PTFE: Kedu ihe kacha mma fluorinated |BESTFLON

Fluorine roba (FKM) bụ thermosetting elastomer, ebe polytetrafluoroethylene (PTFE) bụ thermoplastic.Ha abụọ bụ ihe nwere fluorinated, nke atom fluorine gbara ya gburugburu, nke na-eme ka ha na-eguzogide ọgwụ na-enweghị atụ.N'isiokwu a, TRP polymer ngwọta na-atụnyere ihe abụọ dị n'etiti FKM naPTFEiji chọpụta nke bụ ihe ikpeazụ fluorinated ma họrọ nke ikpeazụPTFE hose emeputa

Uru nke FKM roba na PTFE

Mmalite:

FKM: Ụgbọ elu n'oge Agha Ụwa nke Abụọ nwere nsogbu site na mwepu nke nitrile seals, nke na-enweghị obere ọrụ okpomọkụ achọrọ maka ngwa dị iche iche.Inertness kemịkalụ nke njikọ fluorocarbon pụtara na fluorinated elastomers, ma ọ bụ fluoroelastomer, bụ nkwubi okwu ebumpụta ụwa.Ya mere, rọba FKM malitere ịzụ ahịa na 1948

PTFE: Na 1938, ọkà mmụta sayensị DuPont Roy Plancott chọtara polytetrafluoroethylene na mberede.Plunkett jiri refrigerants nwale ma chekwaa ya na cylinders.N'ụzọ tụrụ ya n'anya, ikuku ndị a gbakọtara, na-ahapụ ihe na-acha ọcha waxy, nke na-adịghị emeghachi omume na ihe ọ bụla chemical bekee na ike idi oke okpomọkụ.DuPont debara aha mbụ nke PTFE ihe-ptfe na 1945

Mkpebi: Mmepe nke PTFE bụ ndakọrịta nke akara aka na-adọrọ adọrọ, nke mere ka a mụọ ihe dị egwu.Otú ọ dị, ihe na-adọrọ adọrọ, FKM rọba, dị nnọọ mkpa na afọ agha.N'ihi nke a, onyinye akụkọ ihe mere eme nke FKM fluoroelastomer pụtara na ọ dịtụ mma na asọmpi asọmpi a

Njirimara:

FKM roba: FKM rọba nwere njikọ carbon-fluorine siri ike, na-eme ka ọ bụrụ kemịkalụ dị ukwuu, na-eguzogide okpomọkụ na oxidation.FKM nwere ọnụọgụ carbon-hydrogen dị iche (njikọ nwere okpomọkụ na-esighị ike na nguzogide kemịkalụ), mana ọ ka nwere nguzogide kemịkalụ siri ike karịa ọtụtụ elastomer ndị ọzọ.

PTFE: Polytetrafluoroethylene bụ nke nwere agbụ nke carbon carbon, yana atom fluorine abụọ na atom carbon ọ bụla.Atọm fluorine ndị a na-agba gburugburu agbụ carbon ka ha mepụta mkpụrụ ndụ dị oke nke nwere njikọ carbon-fluorine siri ike yana usoro polymer, na-eme PTFE inert na ọtụtụ kemịkalụ.

Mkpebi: Dabere na ihe mejupụtara kemịkalụ ha dị iche iche, PTFE enweghị njikọ carbon-hydrogen, nke na-eme ka ọ bụrụ kemịkalụ karịa FKM (ọ bụ ezie na FKM ka na-eguzogide ọgwụ na-enweghị atụ).N'ihi nke a, PTFE bụ naanị onyinyo nke FKM na gburugburu a

Uru:

FKM:

Oke okpomọkụ (-45°C-204°C)

Nguzogide kemịkalụ mara mma

Nnukwu njupụta, ezigbo udidi

Ezigbo ihe eji arụ ọrụ

Enwere ike ịmepụta ya maka mgbawa mgbawa, CIP, SIP

PTFE:

Nnukwu nguzogide okpomọkụ (-30°C ruo +200°C)

Kemịkalụ inert

Ihe mkpuchi eletrik dị mma

Oke oyi na-eguzogide okpomọkụ

Enweghị nrapado, mgbochi mmiri

Ọnụọgụ nke esemokwu bụ nke kacha nta n'ime ihe siri ike niile

Mkpebi: Ọ gaghị ekwe omume ikewa ha gburugburu a.FKM na-enye nguzogide okpomọkụ ka ukwuu, mana ọ naghị eru arụ ọrụ PTFE n'ihe gbasara nguzogide kemịkalụ.Na PTFE dị ntakịrị obere na-eguzogide okpomọkụ, ma na-enye ọtụtụ ụzọ nke enweghị nrapado Njirimara

Ihe ọghọm:

FKM:

Ọ ga-aza na ihe mgbaze fluorinated?

Enweghị ike iji ọla alkali gbazere ma ọ bụ gaseous mee ihe

Ọnụ ahịa dị elu karịa ihe ndị ọzọ na-abụghị fluorocarbons

Ịhọrọ FKM na-ezighi ezi maka ngwa ahụ nwere ike ibute ọdịda ngwa ngwa

Ọkwa okpomọkụ dị ala nwere ike ịdị ọnụ

PTFE:

Ike dị ala na isi ike

Enweghị ike ịgbaze ya

Nguzogide radieshon na-adịghị mma

Isi ike nke Shore dị elu na-eme ka PTFE sie ike akara

Ptfe o-mgbanaka nwere ọnụego ntapu dị elu karịa ndị elastomers ndị ọzọ

Enweghi ike na-eme ka ntinye akara otutu ghara ikwe omume

Mkpebi: N'ozuzu, FKM rọba meriri agba nke asọmpi a site na ike ya dị elu, mgbanwe na ike akara.N'ezie, ọ bụrụ na ihe ọ bụla ma a kemịkal inert akara ezughị, mgbe ahụ PTFE bụ ezigbo nhọrọ.Agbanyeghị, FKM na-enyekwu mgbanwe n'akụkụ niile!

Ngwa:

FKM:

Ụgbọala

Nhazi kemịkalụ

Mmanụ na gas

Igwe ọrụ dị arọ

Igwe ikuku

Ọtụtụ ndị ọzọ

PTFE:

Ngwá ọrụ nhazi kemịkalụ

Valves

Ụgbọ njem kemịkalụ

Pump diaphragms

Mkpebi: Ọ bụ agha na-egbu egbu ọzọ!FKM nwere ọtụtụ ngwa ngwa, enwere ike itinye ya na ngwa ụfọdụ dị oke arọ.Otú ọ dị, n'agbanyeghị njedebe ya, ihe PTFE na-enye ngwọta kachasị mma maka ngwa ndị kasị sie ike gụnyere oke nrụgide, okpomọkụ na kemịkalụ corrosive.

Ọnụ:

FKM rọba bụ ngwaahịa adịchaghị mma n'ihi ihe mejupụtara kemịkalụ ya yana nguzogide kemịkalụ na-esote.Ọ bụrụ na ị naghị atụle akụrụngwa kemịkalụ na nguzogide okpomọkụ, ị nwere ike ịhọrọ elastomer dị ọnụ ala.

PTFE: PTFE ihe bụkwa ngwaahịa dị elu.N'otu aka ahụ, ọ bụrụ na okpomọkụ, nrụgide, na kemịkalụ na-emebi emebi nke etinyere na ngwa gị agafeghị oke ikpe, mgbe ahụ ụzọ ọzọ dị ọnụ ala nwere ike ịbụ ihe na-achọsi ike.Iji nweta arụmọrụ akara kacha mma, PTFE jikọtara ya na isi elastomer iji nye nguzogide mkpakọ.

Mkpebi: Ma FKM na PTFE bụ ngwaahịa dị elu maka ezi ihe kpatara ya.Ihe abụọ a nwere ihe pụrụ iche, nke na-akọwa ọnụ ahịa nke ịmepụta ha.Otú ọ dị, ị kwesịrị icheta na maka ngwa dị oke egwu, ha abụọ na-enye atụmatụ pụrụ iche.N'okwu a, ị ga-enweta ihe ị na-akwụ, na ọnụ ala ọzọ na-adakarị ngwa ngwa.Nke a bụ akụ na ụba na-ezighi ezi.

Nsonaazụ: N'ozuzu, mgbanwe nke FKM na-enye ya uru na agbụrụ echiche a.N'ikpeazụ, ihe abụọ a nwere fluorinated na-enye nguzogide kemịkal pụrụ iche na nguzogide okpomọkụ.Otú ọ dị, dịka plastik, PTFE siri ike karịa FKM;na-eme ka ọ dị mma maka ngwa mkpuchi kachasị oke ebe nrụgide dị elu na kemịkalụ na-emebi emebi bụ isi nchegbu.Ngwa ngwa FKM ka ukwuu dị ka ihe eji emechi akara, nke ọma, gosipụtara mmeri ya!

Anyị na-atụ anya na ntụle a nke FKM roba na PTFE ga-eme ka ị ghọtakwuo njirimara dị iche iche nke ihe ọ bụla.A ghaghị imesi ya ike na ụzọ kachasị mma ịhọrọ ihe kachasị mma maka ngwa gị bụ ịgwa onye ọkachamara nke nwere ike ịgwa gị ọkwa dị iche iche ma kwekọọ na ngwọta dị mma maka ngwa gị.

Ihe dị n'elu bụ maka mmeghe ọdịnaya metụtara FKM na PTFE, enwere m olileanya na isiokwu a nwere ike inyere gị aka, anyị sitere na ọkachamara ChinaPTFE hose suppliers, welcome to consult our products and please freely contact us at sales 02@zx-ptfe.com