Masu kera da masu samar da bututun Teflon masu sassauƙa daga China
Besteflon babban kamfani ne da ke kera bututun PTFE na ƙwararru, yana ba da ƙananan bututun da suka dace da diamita na ciki daga 0.3 mm zuwa 8.38 mm ga OEMs da masu rarrabawa a cikin kayan aikin nazari.
Na'urorin likitanci, jigilar ruwa, da sauran masana'antu masu alaƙa. A matsayinka na cikakken mai samar da bututun PTFE,
Besteflon yana tallafawa keɓancewa mai sassauƙa na ƙayyadaddun bayanai, yana isar da samfura cikin kwana uku, kuma yana fara tsara samarwa don yin oda mai yawa tun daga kwana bakwai.
Besteflonhedikwatar ta tana Huizhou, Guangdong, China, kuma ta ƙware a fannoni daban-daban na PTFE Capillary Tube da kumaPTFE TUBE
Tare da sama da shekaru 20 na ƙwarewa da kayan aiki masu kyau, ƙungiyarmu tana ci gaba da samarwa da samar da bututun PTFE Capillary Tube.wanda ya dace da mafi girman ƙa'idodi
Features da Fa'idodi na PTFE Capillary Tube
Cikakkun Bayanan Samfurin PTFE Capillary Tube
PTFE Capillary Tube
Tabbatar da ƙayyadaddun bayanai shine kawai matakin farko a zaɓe. Maganin ƙarshen saman bututun capillary na PTFE yana shafar aikin rufewa;
santsi a bango na ciki yana shafar ingancin kwararar ruwa; alamun launi suna sauƙaƙa gano bututun mai;
da hanyoyin marufi suna tasiri ga ingancin ciyarwa—waɗannan cikakkun bayanai suna da mahimmanci don samun nasarar haɗa kai cikin tsarin ku. Besteflon yana ba da zaɓuɓɓuka masu cikakken bayani a duk faɗin girma, kamar yadda aka yi bayani a ƙasa.
Zaɓuɓɓukan Launi & Alamar
| Zaɓin Launi | Iaikin gini |
| Na Halitta | Launin PTFE na yau da kullun, ya dace da yawancin aikace-aikace |
| Mai haske | Ana iya ganin yanayin ruwa a cikin bututun. |
| An yi masa laƙabi mai launi | Ja, shuɗi, kore, rawaya, baƙi, da sauransu, don gano bututun mai |
Zaɓuɓɓukan Marufi
| PZaɓuɓɓukan ackaging | Iaikin gini | Bayani dalla-dalla |
| Nada | Hanyar da aka saba amfani da ita tare da tsayi mai ci gaba, ta dace da ciyarwa ta atomatik | 100m/153m/305m |
| Kunshin Musamman | Fakiti da lakabi bisa ga buƙatun abokin ciniki | Yi shawarwari da kuma tantancewa |
Ingantaccen Ingancin Gudawa
•OD(OuterDiameter）Diamita na waje na bututunyana ƙayyade girman dacewa tare dakayan aiki.
•ID(InnerDiameter）Diamita na lumen yana ƙayyade ƙimar kwarara da halayen ruwa
•BangoTrashin ƙarfi= (OD - ID) / 2Yana shafar ƙimar juriyar ƙarfin lantarki da sassauci
Bayanin PTFE Capillary Tube
Mataki na farko wajen siyan bututun capillary na PTFE shine a tabbatar da cewa takamaiman bayanai sun dace. Diamita na ciki yana ƙayyade saurin kwarara da gudu, diamita na waje yana shafar dacewa da haɗin gwiwa, yayin da kauri bango yana shafar juriya da sassauci - duk girma uku suna da mahimmanci. Besteflon yana ba da cikakken jerin daidaitattun abubuwa tare da diamita na ciki daga 0.3 mm zuwa 8.38 mm, tare da zaɓuɓɓukan kera na musamman. Ga ƙayyadaddun bayanai da aka fi sani; don wasu girma dabam, tuntuɓi injiniyoyinmu don kimantawa.
| Bayani/ | ID | OD | Ma'auni/Naɗi | |||||
|
|
| Nau'in S | Kauri a Bango/ | Nau'in T-T | Kauri a Bango/ | Nau'in L | Kauri a Bango/ |
|
| 30 | 0.3 | 0.76 | 0.23±0.05 | 0.76 | 0.23±0.05 | 0.6 | 0.15±0.04 | 305 |
| 28 | 0.38 | 0.84 |
| 0.84 |
| 0.68 |
| 305 |
| 26 | 0.46 | 0.92 |
| 0.92 |
| 0.76 |
| 305 |
| 24 | 0.56 | 1.16 | 0.30±0.06 | 1.06 | 0.25±0.06 | 0.86 |
| 305 |
| 23 | 0.66 | 1.26 |
| 1.16 |
| 0.96 |
| 305 |
| 22 | 0.71 | 1.31 |
| 1.21 |
| 1.01 |
| 305 |
| 21 | 0.81 | 1.41 |
| 1.31 |
| 1.11 |
| 305 |
| 20 | 0.86 | 1.66 | 0.40±0.07 | 1.46 | 0.30±0.06 | 1.16 |
| 305 |
| 19 | 0.96 | 1.76 |
| 1.56 |
| 1.26 |
| 305 |
| 18 | 1.07 | 1.87 |
| 1.67 |
| 1.37 |
| 305 |
| 17 | 1.19 | 1.99 |
| 1.79 |
| 1.49 |
| 305 |
| 16 | 1.34 | 2.14 |
| 1.94 |
| 1.64 |
| 305 |
| 15 | 1.5 | 2.3 |
| 2.1 |
| 1.8 |
| 153 |
| 14 | 1.68 | 2.48 |
| 2.28 |
| 2.08 | 0.20±0.05 | 153 |
| 13 | 1.93 | 2.73 |
| 2.53 |
| 2.33 |
| 153 |
| 12 | 2.16 | 2.96 |
| 2.77 |
| 2.56 |
| 153 |
| 11 | 2.41 | 3.21 |
| 3.01 |
| 2.81 |
| 153 |
| 10 | 2.69 | 3.49 |
| 3.29 |
| 3.09 |
| 153 |
| 9 | 3 | 4 | 0.50±0.07 | 3.76 | 0.38±0.07 | 3.4 |
| 100 |
| 8 | 3.38 | 4.38 |
| 4.14 |
| 3.78 |
| 100 |
| 7 | 3.76 | 4.76 |
| 4.52 |
| 4.16 |
| 100 |
| 6 | 4.22 | 5.22 |
| 4.98 |
| 4.72 | 0.25±0.06 | 100 |
| 5 | 4.72 | 5.72 |
| 5.48 |
| 5.22 |
| 100 |
| 4 | 5.28 | 6.28 |
| 6.04 |
| 5.78 |
| 100 |
| 3 | 5.94 | 6.94 |
| 6.7 |
| 6.44 |
| 100 |
| 2 | 6.68 | 7.68 |
| 7.44 |
| 7.18 |
| 100 |
| 1 | 7.46 | 8.46 |
| 8.22 |
| 7.96 |
| 100 |
| 0 | 8.38 | 9.38 |
| 9.14 |
| 8.88 |
| 100 |
Abubuwan da ke sama cikakkun bayanai ne na yau da kullun; ana tallafawa keɓancewa don ID, OD, kauri bango, da tsayi.
Ba ka sami abin da kake nema ba?
Kawai ka gaya mana cikakkun buƙatunka. Za a bayar da mafi kyawun tayin.
Me yasa Zabi Besteflon PTFE Capillary Tubes
Bayan duba ƙayyadaddun bayanai da cikakkun bayanai, tambaya ta gaba ita ce: Da yawa daga cikinsuMasu samar da capillary na PTFEA kasuwa, me ya bambanta Besteflon? Babban bambancin ya ta'allaka ne da gaskiyar cewa yawancin masu siyarwa a saman sakamakon bincike su ne masu rarrabawa ko masu samar da kayan masarufi na dakin gwaje-gwaje, suna ba da ƙayyadaddun bayanai, zaɓuɓɓukan keɓancewa kaɗan, da kuma ƙarancin tallafin fasaha.Besteflonmasana'anta ce mai cikakken iko daga ƙarshe zuwa ƙarshe - daga fitar da kayan da aka gama zuwa gwajin samfura - wanda hakan ya sa waɗannan fa'idodi shida suka zama manyan dalilan da ya sa abokan cinikin B2B suka zaɓe mu.
Besteflon tana aiki da kantaLayin samar da fitarwa na PTFE, kuna kula da cikakken iko na ciki a duk tsawon aikin, tun daga kayan aiki zuwa kayayyakin da aka gama. Ba kamar masu rarrabawa ba, kuna aiki kai tsaye tare da masana'anta, kuna kawar da matsakaicin maki yayin da kuke jin daɗin zaɓuɓɓukan keɓancewa masu sassauƙa da ingancin tsari mai daidaito.
Diamita na 0.3 mm yana wakiltar ɗaya daga cikin iyakokin daidaito donPTFE masana'antar capillaryBesteflon ya cimma daidaiton samar da taro a wannan ƙa'ida, inda ya cika ƙa'idodi masu tsauri don daidaiton diamita na ciki a aikace-aikace kamar bututun allurar atomizer na ICP da capillaries na HPLC.
Takamaiman ƙa'idodi ba za su iya cika dukkan buƙatun aikin ba. Besteflon yana ba da diamita na ciki, diamita na waje, kauri na bango, tsayi, launi, da hanyoyin yankewa, tare da ayyukan duba zane. Muna kula da oda tun daga ƙananan rukunin gwaji zuwa manyan ayyukan samarwa, wanda ya shafi oda daga naɗi ɗaya har zuwa dubban mita.
• Samfura: An kawo su cikin kwanaki 3 na aiki (ana iya jigilar takamaiman bayanai a rana ɗaya)
• Gwaji na ƙaramin rukuni: Kwanaki 5-7 na aiki
• Umarnin Rukunin: Jadawalin samarwa yana farawa cikin kwanakin aiki 7-10
• Sabis na gaggawa: Lokacin isarwa za a iya rage shi zuwa kwanaki 5 ya danganta da ƙarfin samarwa
Idan aka kwatanta da lokutan isar da kaya na tsawon makonni 4-8 na kamfanonin ƙasashen waje, isar da kaya cikin sauri na Besteflon yana tabbatar da cewa aikin ku ba zai yi jinkiri ba.
Kowace rukuni naBututun capillary na PTFEYana bin waɗannan matakai kafin ya bar masana'antar:
• Cikakken bincike na diamita na ciki, diamita na waje, da kauri na bango
• Duba gani (santsi a saman, bambancin launi)
• Gwajin juriyar ƙarfin lantarki (ƙa'idodin gwaji da aka keɓance bisa ga yanayin aikace-aikace)
• Zaɓi: Rahoton nazarin abubuwan da aka haɗa,RoHSsanarwa
Duk da cewa manyan kamfanoni suna da hanyoyin sabis na abokin ciniki masu rikitarwa tare da matakai daban-daban na hulɗa, Besteflon yana ba da damar sadarwa kai tsaye tare da injiniyoyin extrusion na PTFE. Daga shawarwarin zaɓi da kimanta yuwuwar keɓancewa zuwa tambayoyin fasaha - za ku sami amsoshin ƙwararru cikin awanni 24, maimakon bin samfuran da aka saba.
PTFE vs Sauran Kayan Aikin Tube na Capillary
Bayan gano yanayin aikace-aikacen, ya kamata ku kuma tantance ko PTFE shine kayan da ya fi dacewa. A wasu lokuta,PFAya fi kyau; a wasuFEPya fi dacewa; yayin da wasu aikace-aikace ke buƙatar PEEK kawai. Kayan aikin kwatantawa mai zuwa zai taimaka muku yanke shawara cikin sauri—idan har yanzu kuna da tambayoyi, injiniyoyin Besteflon za su iya ba da shawarwari na musamman bisa ga takamaiman buƙatun aikinku.
| Halaye | PTFE capillary tube | PFA capillarybututu | Bututun capillary na FEP | Bututun capillary na PEEK |
| Zafin Aiki | -65~+260°C | -200~+260°C | -200~+200°C | -60~+250°C |
| Juriyar Sinadarai | Mafi kyau (ga kusan dukkan sinadarai) | Madalla sosai | Madalla sosai | Mai kyau (bai dace da sinadarin sulfuric mai ƙarfi ba) |
| Bayyana gaskiya | Farin Madara | Mai haske | Mai gaskiya | A bayyane |
| sassauci | Mai sassauƙa amma ba mai naɗewa ba | Mai sassauci | Mafi sassauƙa | Mai Tauri |
| Aikace-aikacen da Aka saba | Kayan aikin bincike, ruwa mai zafi mai yawa | Ruwa mai tsafta, semiconductors | Hanyar kwararar gani, ƙarancin zafin jiki | Bukatun matsin lamba mai yawa; ƙayyadaddun ƙarfin injina masu tsauri |
| Matakin Farashi | Matsakaici | Babban | Matsakaici | Babban |
Aikace-aikacen PTFE Capillary Tube Aikace-aikace
Takaddun shaida da kula da inganci sun tabbatar da cancantar mai samar da kayayyaki; tambaya ta gaba ita ce: za a iya amfani da wannan kayan bututu a masana'antar da nake yi? Bukatun donBututun capillary na PTFEYa bambanta sosai a faɗin masana'antu—kayan aikin nazari suna fifita daidaiton diamita na ciki, na'urorin likitanci suna jaddada jituwa tsakanin halittu, yayin da aikace-aikacen jigilar ruwa ke buƙatar juriya ga matsin lamba da zafin jiki. Besteflon yana ba da shawarwari na musamman da mafita na sarrafa inganci bisa ga takamaiman yanayin aikace-aikacen.
Kayan Aikin Nazari
Ga masu amfani da atomizer na ICP-OES/ICP-MS, haɗin capillary na HPLC, da tsarin electrophoresis na capillary, daidaiton diamita na ciki da kuma ƙarewar saman kayan bututu suna da matuƙar buƙata. An inganta bututun capillary na PTFE mai girman diamita 0.3 mm–1.0 mm na Besteflon musamman don aikace-aikacen nazarin daidaito, yana nuna ganuwar ciki mai santsi waɗanda ke rage ragowar samfurin da gurɓatawa. GaPTFE santsi huda bututuSaboda yana buƙatar manyan diamita na ciki, Besteflon kuma yana ba da cikakkun bayanai dalla-dalla da mafita na sarrafa inganci.
Na'urorin Lafiya
Tsarin jagorar catheter, bututun microinfusion, da hanyoyin kwararar na'urar gano cuta - ƙwayoyin PTFE da ake amfani da su a cikin na'urorin likitanci dole ne su cika buƙatun biocompatibility. An ƙera Besteflon daga kayan PTFE na likita.
Tsarin Canja wurin Ruwa
Isar da sinadarai masu aiki, jigilar ruwa mai tsafta, da kuma da'irori masu sanyaya ƙananan sikelin - rashin ƙarfin sinadarai na PTFE da kewayon zafin jiki mai faɗi (-65°C zuwa +260°C) sun sanya shi abin da aka fi so don sarrafa ruwa mai lalata. Ga tsarin bututun da ke buƙatar ƙarin sassauci da diyya mai sassauƙa, Besteflon kuma yana ba daMaganin bututun PTFE mai rikitarwa
Lantarki & Semiconductor
Hannun riga masu rufi, bututun kariya daga firikwensin, da jigilar ruwa mai tsafta - kyawawan halayen dielectric na PTFE (dielectric constant 2.1, ƙarfin dielectric 25 kV/mm) da ƙarancin halayen leaching sun sa ya dace da buƙatun muhalli masu tsabta a masana'antar semiconductor da lantarki.
Takardar Shaidar Tabbatarwa
Besteflon kamfani ne mai ƙwarewa kuma mai tsari. A yayin haɓaka kamfanin, mun ci gaba da tara ƙwarewa da inganta matakin fasaha, kuma mun himmatu wajen samar wa abokan ciniki kayayyaki da ayyuka mafi inganci.
FDA
IATF16949
ISO
SGS
Tambayoyin da ake yawan yi akai-akai
1.Menene ƙaramin diamita na ciki na babban murfin Besteflon PTFE?
Mafi ƙarancin diamita na ciki na 0.3 mm yana ba da damar samar da taro mai ɗorewa. Ana iya kimanta ƙayyadaddun bayanai masu kyau bisa ga buƙatu.
2.Za mu iya keɓance takamaiman bayanai marasa daidaito?
Eh. Besteflon yana goyan bayan sigogi na musamman kamar ID, OD, kauri na bango, tsayi, da launi. Mafi ƙarancin adadin oda shine nadi 1 (ƙididdigar daidaito) ko kuma ana iya yin shawarwari don takamaiman bayanai marasa daidaito.
3.Har yaushe ne lokacin isar da samfurin?
Ana iya jigilar samfuran ƙayyadaddun bayanai na yau da kullun a rana ɗaya, yayin da za a isar da takamaiman bayanai na musamman cikin kwanakin aiki 3.
4.Za a iya amfani da PTFE capillaries a aikace-aikacen hulɗa da abinci?
Ana ƙera Besteflon ta amfani da kayan PTFE masu bin ka'idojin FDA kuma tana zuwa da takaddun shaida masu dacewa.
5.Yadda ake zaɓar tsakanin bututun PTFE na capillary da bututun PFA na capillary?
Don bayyanawa ko tsarki mafi girma, zaɓi PFA; don juriya mai kyau da ƙarancin gogayya, zaɓi PTFE. Injiniyoyin Besteflon za su iya ba da shawarwari na musamman dangane da takamaiman buƙatun aikace-aikacen ku.
6. Tsawon lokacin sabis na PTFE nawa ne?
Duk kayan PTFE suna da tsawon rai mara iyaka idan aka adana su a ƙarƙashin yanayin ajiya na yau da kullun. A gaskiya ma, abin dariya ne da aka saba gani a masana'antar shine tsawon shekaru 85, PTFE "bai wanzu ba da daɗewa" don tantance tsawon lokacin da zai iya ɗauka!
7.Shin kuna goyon bayan hanyoyin marufi na birgima da kuma hanyoyin marufi na yankewa?
Tallafi: Ana jigilar shi ta hanyar tsohuwa, amma ana iya yanke shi zuwa tsayin da aka ƙayyade.
