Matsakaici Matsi Mai Sanyi Mai PTFE Mai Sanyi Mai Kauri, Masana'anta, Mai Kaya A China
An kafa Besteflon Industrial Co., Ltd a shekarar 2005, kuma yana ɗaya daga cikin manyan masana'antun bututun PTFE mai laushi, masana'antu da masu samar da kayayyaki a China, suna karɓar odar OEM, ODM, da SKD. Muna da ƙwarewa mai yawa a samarwa da haɓaka bincike don nau'ikan bututun ptfe masu matsin lamba daban-daban. Muna mai da hankali kan fasaha mai ci gaba, matakan masana'antu masu tsauri, da kuma cikakken tsarin QC.
Takaddun shaida: ISO9001:2015 │ Umarnin RoHS (EU) 2015/863 │ Hukumar FDA ta Amurka 21 CFR 177.1550 │ Hukumar EU GHS SDS
Matsakaici Matsi na PTFE Mai Sanyi Mai Haɗawa
Thematsakaicin matsin lamba PTFE mai santsi bututun hudaAn yi shi da bututun ciki na PTFE mai tsarki 100% da kuma wani Layer na kitso na waya mai bakin karfe 304/316. Kitso mai tauri na waya mai bakin karfe yana ba da ƙarfi da kariya ga bututun ciki kuma yana ba da damar samun matsi mai kyau.
A matsayinMai ƙera OEM SAE100R14, bututunmu (PTFE) yana samuwa a matsin lamba har zuwa 3000 PSI, wannan matsakaicin matsin lambaBututun PTFEyana da tsawon rai mai matuƙar amfani kuma yana da kyakkyawan daidaiton sinadarai. Domin bututun PTFE ba ya shiga cikin sinadarai, man fetur, tururi, abubuwan narkewa, man shafawa na roba, da man hydraulic.
Zaɓi Tushen PTFE Mai Matsi Mai Sanyi
Matsakaicin matsin lamba mai santsi rami mai santsi PTFE tiyoAna amfani da (3000 PSI) sosai wajen buƙatar iskar gas mai matsewa da aikace-aikacen masana'antu. PTFE ɗinsa mai juriya ga sinadarai yana ƙirƙirar bututun da ke kusan "duniya" wanda zai iya sarrafa matsa lamba na matsakaici na dukkan (zafin jiki mai zafi) da kuma lalata. Kamar masana'antar sinadarai, manne mai zafi, takarda da ɓangaren litattafan almara, matse mai zafi, tururi, man fetur, fenti, injina, da sauran aikace-aikace masu wahala. Irin waɗannan iyakokin bututun roba, ƙarfe, da na roba sun sa bututun PTFE su zama mafita ɗaya tilo a ko'ina. Kayan aikinmu na musamman, waɗanda aka yi da injin daidai za su iya samar da haɗin bututun da gaske don duk aikace-aikacenku masu wahala.
Bugu da ƙari,Besteflonmatsakaicin matsin lamba mai santsi na bututun mai santsikuma yana samar da ba mai da wutar lantarki ba da kuma mai da wutar lantarkiBututun PTFEWasu aikace-aikacen suna buƙatar layin mai jurewa don kawar da cajin lantarki. Ruwa ko iskar gas mai ƙarfi a cikin babban gudu na iya samar da caji mai kyau a cikin layin PTFE. Idan ba a wargaza shi zuwa ƙarshen bututun ba, cajin zai taru har sai ya ratsa ta bangon bututun zuwa layin da aka kitsa, wanda ke haifar da mummunan lalacewar bututun. Don rage wannan matsalar, za a ƙara layin mai jurewa mai baƙi na carbon a bangon bututun ciki.
Tsarin PTFE na Bango na Standard
Bututun ciki: PTFE mara kyau 100%
Kauri daga bangon bututu: 0.7mm - 1.1mm (ya danganta da girman)
Matashin ƙarfafawa: Bakin ƙarfe mai ƙarfi mai tsayi mai layi ɗaya mai lanƙwasa 304/316 an kiɗa shi da waya mai lanƙwasa
Yanayin zafin jiki: -65℃ ~ +260℃ (-85℉ ~ + 500℉), zafin jiki mafi girma, matsin lamba ƙasa
Kadarorin:
a. Kyakkyawan juriya mai ƙarfi da ƙarancin zafin jiki
b. Kyakkyawan juriya ga sinadarai, juriya ga mai
c. Ba ya mannewa, santsi, kuma yana da ƙarancin gogayya,
d. Juriyar Tsanani da Tsanani
e. Nauyi mai sauƙi kuma ya fi sassauƙa fiye da bututun PTFE mai santsi
f. Bi ƙa'idar SAE100R14
Aikace-aikace:
Masana'antar kera motoci, masana'antar na'urar haƙa ruwa, canja wurin sinadarai, fenti, sarrafa magunguna, sarrafa abinci da abin sha, kayan kwalliya, da aikace-aikacen gabaɗaya.
Nasihu:Kauri mai siriri sosai, wanda ya dace da amfani a yanayin zafi mai yawa, don adana kasafin kuɗin ku. Idan aka yi amfani da shi a yanayin zafi mai tsanani, babu shakka rayuwar sabis ɗin za ta ragu.
Bayanan Tsarin Tiyo na PTFE na Bango na Standard
| Lambar Abu | Diamita na Ciki | Diamita na waje | Bangon Tube Kauri | Matsi na Aiki | Matsi na Fashewa | Mafi ƙarancin Radius Mai Lanƙwasa | Ƙayyadewa | Bayanin ƙoƙo. | ||||||
| (inci) | (mm) | (inci) | (mm) | (inci) | (mm) | (psi) | (mashaya) | (psi) | (mashaya) | (inci) | (mm) | |||
| ZXGM121-03 | 1/8" | 3.2 | 0.236 | 6 | 0.033 | 0.85 | 3263 | 225 | 13050 | 900 | 0.787 | 20 | -2 | ZXTF0-02 |
| ZXGM121-04 | 3/16" | 4.8 | 0.287 | 7.6 | 0.028 | 0.7 | 2719 | 188 | 10875 | 750 | 1.181 | 30 | -3 | ZXTF0-03 |
| ZXGM121-05 | 1/4" | 6.4 | 0.354 | 9 | 0.028 | 0.7 | 2501 | 173 | 10005 | 690 | 1.181 | 30 | -4 | ZXTF0-04 |
| ZXGM121-06 | 5/16" | 8 | 0.433 | 11 | 0.028 | 0.7 | 2139 | 148 | 8555 | 590 | 1.575 | 40 | -5 | ZXTF0-05 |
| ZXGM121-07 | 3/8" | 9.5 | 0.488 | 12.4 | 0.028 | 0.7 | 1704 | 118 | 6815 | 470 | 2.362 | 60 | -6 | ZXTF0-06 |
| ZXGM121-08 | 13/32" | 10.3 | 0.524 | 13.3 | 0.028 | 0.7 | 1634 | 113 | 6525 | 450 | 3.150 | 80 | -7 | ZXTF0-07 |
| ZXGM121-10 | 1/2" | 12.7 | 0.626 | 15.9 | 0.031 | 0.8 | 1450 | 100 | 5800 | 400 | 5.906 | 150 | -8 | ZXTF0-08 |
| ZXGM121-12 | 5/8" | 16 | 0.756 | 19.2 | 0.031 | 0.8 | 1051 | 73 | 4205 | 290 | 7.087 | 180 | -10 | ZXTF0-10 |
| ZXGM121-14 | 3/4" | 19 | 0.890 | 22.6 | 0.039 | 1 | 888 | 61 | 3552.5 | 245 | 11,811 | 300 | -12 | ZXTF0-12 |
| ZXGM121-16 | 7/8" | 22.2 | 1.024 | 26 | 0.039 | 1 | 725 | 50 | 2900 | 200 | 10.236 | 260 | -14 | ZXTF0-14 |
| ZXGM121-18 | 1" | 25.4 | 1.161 | 29.5 | 0.043 | 1.1 | 653 | 45 | 2610 | 180 | 15.748 | 400 | -16 | ZXTF0-16 |
* Cika ƙa'idar SAE 100R14.
* Za a iya tattauna wasu muhimman abubuwa da za a iya yi da mu domin mu yi cikakken bayani.
*Tuntube mu don ƙarin cikakkun bayanai kan sauran bututun jerin.
Jerin jerin PTFE na Matsakaici a Bango
Bututun ciki: PTFE mai duhu 100%
Yanayin zafin jiki: -65℃ ~ +260℃ (-85℉ ~ + 500℉), zafin jiki mafi girma, matsin lamba ƙasa
Kauri daga bangon bututu: 0.85mm - 1.5mm (ya danganta da girma)
Kadarorin:
a. Kyakkyawan juriya mai girma da ƙarancin zafin jiki
b. Kyakkyawan juriya ga sinadarai, juriya ga mai
c. Ba ya mannewa, santsi, kuma yana da ƙarancin gogayya,
d. Juriyar Tsanani da Tsanani
e. Nauyi mai sauƙi kuma ya fi sassauƙa fiye da bututun PTFE mai santsi
f. Bi ƙa'idar SAE100R14
Aikace-aikace:
Masana'antar kera motoci, masana'antar na'urar haƙa ruwa, canja wurin sinadarai, fenti, sarrafa magunguna, sarrafa abinci da abin sha, kayan kwalliya da aikace-aikacen gabaɗaya.
Nasihu:A ƙarƙashin yanayin matsin lamba iri ɗaya, yana da kauri bango mai kauri fiye da bango na yau da kullun, kuma ya dace da aikace-aikace inda zafin aiki ya fi 200℃.
Bayanan Tsarin Tiyo na PTFE na Matsakaici a Bango (jerin 111)
| Lambar Abu | Diamita na Ciki | Diamita na waje | Bangon Tube Kauri | Matsi na Aiki | Matsi na Fashewa | Mafi ƙarancin Radius Mai Lanƙwasa | Ƙayyadewa | Bayanin ƙoƙo. | ||||||
| (inci) | (mm) | (inci) | (mm) | (inci) | (mm) | (psi) | (mashaya) | (psi) | (mashaya) | (inci) | (mm) | |||
| ZXGM111-03 | 1/8" | 3.5 | 0.264 | 6.7 | 0.039 | 1 | 3625 | 250 | 14500 | 1000 | 0.630 | 16 | -2 | ZXTF0-02 |
| ZXGM111-04 | 3/16" | 4.8 | 0.307 | 7.8 | 0.033 | 0.85 | 2972.5 | 205 | 11890 | 820 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM111-05 | 1/4" | 6.4 | 0.370 | 9.4 | 0.033 | 0.85 | 2718.75 | 187.5 | 10875 | 750 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM111-06 | 5/16" | 8 | 0.445 | 11.3 | 0.033 | 0.85 | 2356.25 | 162.5 | 9425 | 650 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM111-07 | 3/8" | 10 | 0.524 | 13.3 | 0.033 | 0.85 | 1885 | 130 | 7540 | 520 | 1.299 | 33 | -6 | ZXTF0-06 |
| ZXGM111-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | 1812.5 | 125 | 7250 | 500 | 1.811 | 46 | -7 | ZXTF0-06 |
| ZXGM111-10 | 1/2" | 12.7 | 0.638 | 16.2 | 0.039 | 1 | 1631.25 | 112.5 | 6525 | 450 | 2,598 | 66 | -8 | ZXTF0-08 |
| ZXGM111-12 | 5/8" | 16 | 0.764 | 19.4 | 0.039 | 1 | 1160 | 80 | 4640 | 320 | 5.906 | 150 | -10 | ZXTF0-10 |
| ZXGM111-14 | 3/4" | 19 | 0.906 | 23 | 0.047 | 1.2 | 1015 | 70 | 4060 | 280 | 8,898 | 226 | -12 | ZXTF0-12 |
| ZXGM111-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.047 | 1.2 | 870 | 60 | 3480 | 240 | 9.646 | 245 | -14 | ZXTF0-14 |
| ZXGM111-18 | 1" | 25 | 1.173 | 29.8 | 0.059 | 1.5 | 725 | 50 | 2900 | 200 | 11,811 | 300 | -16 | ZXTF0-16 |
| ZXGM111-20 | 1-1/8" | 28 | 1.299 | 33 | 0.059 | 1.5 | 652.5 | 45 | 2610 | 180 | 23.622 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22 | 1-1/4" | 32 | 1.496 | 38 | 0.079 | 2 | 561.875 | 38.75 | 2247.5 | 155 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26 | 1-1/2" | 38 | 1.732 | 44 | 0.079 | 2 | 507.5 | 35 | 2030 | 140 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32 | 2" | 50 | 2.205 | 56 | 0.079 | 2 | 435 | 30 | 1740 | 120 | 27.559 | 700 | -20 | ZXTF0-32 |
* Cika ƙa'idar SAE 100R14.
* Za a iya tattauna wasu muhimman abubuwa da za a iya yi da mu domin mu yi cikakken bayani.
*Tuntube mu don ƙarin cikakkun bayanai kan sauran bututun jerin.
Waɗanne yanayi ne bututun matsin lamba na matsakaici suka dace da su? Me ya kamata mu kula da shi?
Bututun PTFEsun dace da bututun da ke da sassauƙa, kuma suna da juriya mai kyau ga bugun matsin lamba mai zafi, lanƙwasawa, girgiza, da tsufa. Ana iya amfani da shi a ƙarƙashin yanayi mai tsauri na lanƙwasawa da girgiza ba tare da gazawa ba sakamakon gajiyar lanƙwasa.
Yanayin zafin jiki mai faɗi yana daga-65 F zuwa 450 Fkuma ana iya amfani da shi akai-akai na dogon lokaci a yanayin aiki mai ƙarancin zafi / zafi.
Saboda haka, muBututun PTFEsun dace sosai don aikace-aikacen da ke buƙatar zafi mai yawa da ƙarancin zafi, juriya ga sinadarai, ƙarancin haɗin gwiwa, sassauci, da halayen rashin tsufa. Waɗannan bututun PTFE mai santsi duk sun cika ko sun wuce ƙa'idar SAE 100R14.
Amma ya kamata a lura cewa ba a ba da shawarar waɗannan bututun ruwa don ɗaukar nauyin matsin lamba mai ƙarfi ba. Zafin aiki zai shafi matsin lamba kai tsaye na aiki. Lokacin da zafinmu ya wuce 120 C, dole ne mu yi la'akari da ma'aunin rage matsin lamba: (Matsakaicin matsin lamba na aiki = matsin lamba na aiki x ma'aunin)
Zafin jiki: 120 Celsius / 140 Celsius / 160 Celsius / 180 Celsius / 200 Celsius / 220 Celsius.
Mai haɗaka:1.00 / 0.80 / 0.60 / 0.40 / 0.20 / 0.0
Ba ka sami abin da kake nema ba?
Kawai ka gaya mana cikakkun buƙatunka. Za a bayar da mafi kyawun tayin.
Mai samar da bututun matsa lamba na PTFE ɗinku
Kuna da Bukatu na Musamman?
Gabaɗaya, muna da samfuran PTFE HOSE da kayan aiki na yau da kullun a cikin hannun jari. Don buƙatunku na musamman, muna ba ku sabis na keɓancewa. Muna karɓar OEM/ODM. Za mu iya buga tambarin ku ko sunan alamar ku a jikin bututun. Don samun cikakken ƙima, kuna buƙatar gaya mana waɗannan bayanan:
