Tuubada PTFE ee loogu talagalay Warshadaha Milatariga iyo Hawada Sare | BESTEFLON
Tuubbo gudbisa PTFEwaa tuubo dabacsan oo leh sifooyin aad u fiican oo ka hortagga joogtada ah. Waxay koronto ku qabataa iyadoo ku daraysa lakab kaarboon ah dahaarka, tuubadana waxaa inta badan loo isticmaalaa in looga hortago qaraxyada halkaas oo korontada taagan ay ka ururto. Tuubada PTFE waxaa loo cayimay codsiyada warshadaha ee ugu adag. Codsiyada qaarkood waxay u baahan yihiin socodka tuubada si loo baabi'iyo dhismaha taagan. Markaa sida loo doorto tuubada PTFE ee ka hortagga taagan waxay ku xiran tahay habka dhex mara tuubada, sida shidaalka kala duwan, kuwa ololaya, gaaska iyo codsiyada korontada.
Waqtigan xaadirka ah, kuwa ugu badan ee la isticmaalo waa tuubada shidaalka ee baabuurta. Isjiidjiidka uu keeno dareeraha socda wuxuu dhaliyaa koronto taagan. Haddii koronto ku filan oo taagan ay ku ururto tuubada polyethylene, korontada taagan waxaa lagu shubaa dahaarka dibadda ee birta aan miridhku lahayn. Marka ay taasi dhacdo, hawo-mareenka ayaa abuura daadasho god god ah oo ku taal tuubada PTFE. Suufka dahaarka ee kaarboonku wuxuu sii daayaa korontadan si looga hortago shoogga taagan.
Faa'iidooyinka tuubada PTFE ee gudbisa:
1.Iska caabin heerkulka sare, aan ku milmin dareere kasta. Waxay u adkeysan kartaa heerkulka sare ilaa 300 °C waqti gaaban gudaheed, guud ahaanna si joogto ah ayaa loo isticmaali karaa inta u dhaxaysa 200 °C iyo 260 °C, iyadoo leh xasillooni kuleyl oo muhiim ah.
2. Iska caabin heerkulka hooseeya, adkeysi farsamo oo wanaagsan heerkulka hooseeya, xitaa haddii heerkulku hoos ugu dhaco -65 ℃, ma noqon doono mid jilicsan, waxayna sii wadi kartaa 5% dheereyn.
3. Daxalka u adkaysta, oo aan ku habboonayn kiimikooyinka iyo dareerayaasha badankood, oo u adkaysta asiidhyada xooggan iyo alkalis, biyaha iyo dareerayaasha kala duwan ee dabiiciga ah, waxay qaybo ka ilaalin karaan nooc kasta oo daxalka kiimikada ah.
4. Ka hortagga gabowga,culays sare ku jiro, waxay leedahay faa'iidooyin laba geesood ah oo ah iska caabbinta xirashada iyo inaysan dhegdheg lahayn. Nolosha ugu wanaagsan ee gabowga ee balaastikada.
5. PTFE waxay leedahay isku-darka ugu hooseeya ee isku-dhafka walxaha adagIsugeynta is jiidjiidka ayaa isbeddela marka culaysku simbiriirixo, laakiin qiimuhu wuxuu u dhexeeyaa oo keliya 0.05-0.15. Sidaa darteed, waxay leedahay faa'iidooyinka iska caabinta bilowga oo hooseeya iyo hawlgalka siman ee sameynta boodhadhka.
Adeegsiga tuubooyinka PTFE ee gudbiya
1. Warshadaha baabuurta: Tuubada PTFE waxay leedahay astaamo u gaar ah oo iska caabbinta kulaylka sare leh, taas oo ku habboon gaadiidka dareeraha heerkulka sare.
2. Warshadaha korontada: Sifooyinka dielectric-ka ee aadka u fiican ee tuubada PTFE waxay ka dhigayaan doorasho ku habboon dahaarka fiilooyinka danab-sare leh.
Sidaa darteed, haddii ay jiraan dareereyaal hooseeya ama socod laba-waji ah, waxaa loo baahan yahay tuubo gudbisa PTFE. Haddii aadan hubin in badeecadaadu u baahan tahay shaqo gudbisa iyo in kale, fadlan la xiriir shaqaalaha iibka, waxaan ku siin doonnaa jawaab xirfad leh.
Faahfaahinta Alaabta
| Magaca Summada: | |
| Qalabka: | PTFE |
| Faahfaahinta: | 1/8'' ilaa 1'' |
| Dhumucda: | 0.85/1/1.5MM |
| Midabka tuubada gudaha: | madow |
| Heerkulka kala duwan: | -65℃--+260℃ |
| Silig tidcan: | Silig bir ah oo aan miridh lahayn oo 304/316 ah oo tidcan |
| Codsiga: | Qalabka kiimikada/Mashiinka//Gaaska la cadaadiyay/Maareynta shidaalka iyo saliidaha/Wareejinta uumiga/Nidaamyada Haydarooliga |
Kala duwanaanshaha Tuubada Dheer ee Siman
| Maya. | Dhexroorka gudaha | Dhexroorka dibadda | Derbiga Tuubada Dhumucda | cabbirka gacanta | |||
| (inji) | (mm±0.2) | (inji) | (mm±0.2) | (inji) | (mm±0.1) | ||
| ZXGM151-03 | 1/8" | 3.5 | 0.263 | 6.7 | 0.039 | 1.00 | ZXTF0-02 |
| ZXGM151-04 | 3/16" | 4.8 | 0.362 | 9.2 | 0.033 | 0.85 | ZXTF0-03 |
| ZXGM151-05 | 1/4" | 6.4 | 0.385 | 9.8 | 0.033 | 0.85 | ZXTF0-04 |
| ZXGM151-06 | 5/16" | 8.0 | 0.433 | 11.3 | 0.033 | 0.85 | ZXTF0-05 |
| ZXGM151-07 | 3/8" | 9.5 | 0.512 | 13.0 | 0.033 | 0.85 | ZXTF0-06 |
| ZXGM151-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | ZXTF0-06 |
| ZXGM151-10 | 1/2" | 12.7 | 0.630 | 16.0 | 0.039 | 1.00 | ZXTF0-08 |
| ZXGM151-12 | 5/8" | 16.0 | 0.756 | 19.2 | 0.039 | 1.00 | ZXTF0-10 |
| ZXGM151-14 | 3/4" | 19.0 | 0.902 | 22.9 | 0.039 | 1.00 | ZXTF0-12 |
| ZXGM151-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.039 | 1.00 | ZXTF0-14 |
| ZXGM151-18 | 1" | 25.0 | 1.161 | 29.5 | 0.059 | 1.50 | ZXTF0-16 |
* Buuxi heerka SAE 100R14.
* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.
Dadku waxay sidoo kale weydiiyaan:
Fiidiyowga
Wax badan ka baro badeecooyinka BESTFLON
Na sii Email
sales02@zx-ptfe.com
1. Waa maxay tuubada PTFE ee gudbisa korontada?
Tuubada gudbisa PTFE waa tuubo gudaha ah oo kaarboon ka kooban, taas oo loo yaqaan tuubo gudbisa sababtoo ah dahaarka kaarboonku wuxuu sii deyn karaa koronto taagan oo la soo saaro marka la shaqeynayo.
2. Ma u baahanahay inaan isticmaalo tuubooyinka gudbiya codsigayaga?
Marka hore, waxaad u baahan tahay inaad fahamto shaqada tuubada gudbisa? Meelaha kala duwan ee codsiyada waxay leeyihiin shuruudo kala duwan oo ku saabsan in loo baahan yahay saameynta gudbisa iyo in kale. Waqtigan xaadirka ah, codsiyada ugu badan waa warshadaha baabuurta, hawada sare iyo codsiyada korontada. Haddii aad u baahan tahay talo xirfadeed oo dheeraad ah, fadlan la xiriir shaqaalahayaga iibka.
Waxaan bixinaa baakadaha caadiga ah sida soo socota
1, Bac naylon ah ama bac poly ah
2, Sanduuqa kartoonka
3. Baalal balaastig ah ama balaastig alwaax ah
Baakad la habeeyey ayaa la dallacayaa
1, Giraangiraha alwaaxa ah
2, Kiis alwaax ah
3, Baakado kale oo la habeeyey ayaa sidoo kale la heli karaa
