Tiyo mai amfani da wutar lantarki na PTFE don masana'antar soja da sararin samaniya | BESTEFLON
bututun PTFE mai amfani da wutar lantarkibututu ne mai sassauƙa wanda ke da kyawawan kaddarorin hana tsayawa. Yana gudanar da wutar lantarki ta hanyar ƙara wani Layer na carbon a cikin rufin, kuma ana amfani da bututun galibi don hana fashewa inda wutar lantarki mai tsayawa take taruwa. An ƙayyade bututun PTFE don aikace-aikacen masana'antu da yawa mafi ƙalubale. Wasu aikace-aikacen suna buƙatar ikon sarrafa bututun don kawar da toshewar tsaye. Don haka yadda ake yanke shawara don zaɓar bututun PTFE mai hana tsayawa ya dogara da matsakaicin da ke ratsa bututun, kamar man fetur daban-daban, masu ƙonewa, iskar gas da aikace-aikacen lantarki.
A halin yanzu, mafi yawan amfani da su shine bututun mai na mota. Gogayya da ruwan da ke motsi ke haifarwa yana haifar da wutar lantarki mai tsauri. Idan isasshen wutar lantarki mai tsauri ya taru a cikin bututun polyethylene, wutar lantarki mai tsauri tana fitowa cikin rufin waje na bakin karfe. Lokacin da wannan ya faru, hanyar iska tana haifar da ɓullar rami a cikin bututun PTFE. Famfon murfin carbon suna fitar da wannan tarin wutar lantarki don hana girgiza mai tsauri.
Amfanin bututun PTFE mai sarrafawa:
1.Juriyar zafin jiki mai yawa, ba ya narkewa a cikin kowace sinadari. Zai iya jure zafi mai yawa har zuwa 300 °C cikin ɗan gajeren lokaci, kuma gabaɗaya ana iya amfani da shi akai-akai tsakanin 200 °C da 260 °C, tare da kwanciyar hankali mai mahimmanci na zafi.
2. Juriyar yanayin zafi mara ƙarfi, ƙarfin injina mai kyau a ƙananan zafin jiki, koda kuwa zafin ya faɗi zuwa -65 ℃, ba zai yi rauni ba, kuma zai iya kiyaye tsayin 5%.
3. Mai jure lalata, wanda ba ya shiga cikin yawancin sinadarai da sinadarai masu narkewa, wanda ke jure wa acid mai ƙarfi da alkalis, ruwa da sauran sinadarai masu narkewa na halitta daban-daban, na iya kare sassa daga kowace irin lalata sinadarai.
4. Anti-tsufa,a ƙarƙashin babban kaya, yana da fa'idodi biyu na juriya ga lalacewa da rashin mannewa. Mafi kyawun rayuwar tsufa a cikin robobi.
5. PTFE yana da mafi ƙarancin ma'aunin gogayya tsakanin kayan daskararru. Ma'aunin gogayya yana canzawa lokacin da nauyin ya zame, amma ƙimar tana tsakanin 0.05-0.15 ne kawai. Saboda haka, yana da fa'idodin ƙarancin juriya na farawa da aiki mai santsi don yin bearings.
Amfani da bututun PTFE mai sarrafawa
1. Masana'antar mota: Bututun PTFE yana da halaye na musamman masu juriya ga zafi, wanda ya dace da jigilar ruwa a zafin jiki mai yawa.
2. Masana'antar lantarki: Kyakkyawan halayen dielectric na bututun PTFE sun sa ya zama kyakkyawan zaɓi don rufin kebul mai ƙarfin lantarki.
Saboda haka, idan akwai ƙarancin ruwa mai jurewa ko kwararar matakai biyu, ana buƙatar bututun PTFE mai jurewa. Idan ba ku da tabbas ko samfurin ku yana buƙatar aikin jurewa, tuntuɓi ma'aikatan tallace-tallace, za mu ba ku amsar ƙwararru.
Cikakkun Bayanan Samfura
| Sunan Alamar: | |
| Kayan aiki: | PTFE |
| Bayani dalla-dalla: | 1/8'' zuwa 1'' |
| Kauri: | 0.85/1/1.5MM |
| Launin bututun ciki: | baƙar fata |
| Yanayin zafin jiki: | -65℃--+260℃ |
| Waya da aka haɗa: | Wayar bakin karfe 304/316 da aka kididdige |
| Aikace-aikacen: | Kayan aikin sinadarai/Injiniyoyi// Iskar gas mai matsewa/Manyan Man Fetur da mai/Tura tururi/Tsarin na'ura mai aiki da karfin ruwa |
Nisan Tushen Bore Mai Sanyi
| A'a. | Diamita na ciki | Diamita na waje | Bangon Tube Kauri | girman hannun riga | |||
| (inci) | (mm±0.2) | (inci) | (mm±0.2) | (inci) | (mm±0.1) | ||
| ZXGM151-03 | 1/8" | 3.5 | 0.263 | 6.7 | 0.039 | 1.00 | ZXTF0-02 |
| ZXGM151-04 | 3/16" | 4.8 | 0.362 | 9.2 | 0.033 | 0.85 | ZXTF0-03 |
| ZXGM151-05 | 1/4" | 6.4 | 0.385 | 9.8 | 0.033 | 0.85 | ZXTF0-04 |
| ZXGM151-06 | 5/16" | 8.0 | 0.433 | 11.3 | 0.033 | 0.85 | ZXTF0-05 |
| ZXGM151-07 | 3/8" | 9.5 | 0.512 | 13.0 | 0.033 | 0.85 | ZXTF0-06 |
| ZXGM151-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | ZXTF0-06 |
| ZXGM151-10 | 1/2" | 12.7 | 0.630 | 16.0 | 0.039 | 1.00 | ZXTF0-08 |
| ZXGM151-12 | 5/8" | 16.0 | 0.756 | 19.2 | 0.039 | 1.00 | ZXTF0-10 |
| ZXGM151-14 | 3/4" | 19.0 | 0.902 | 22.9 | 0.039 | 1.00 | ZXTF0-12 |
| ZXGM151-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.039 | 1.00 | ZXTF0-14 |
| ZXGM151-18 | 1" | 25.0 | 1.161 | 29.5 | 0.059 | 1.50 | ZXTF0-16 |
* Cika ƙa'idar SAE 100R14.
* Za a iya tattauna samfuran da suka shafi abokan ciniki tare da mu don ƙarin bayani.
Mutane kuma suna tambaya:
Bidiyo
Ƙara koyo game da samfuran BESTFLON
Ba Mu Imel
sales02@zx-ptfe.com
1. Menene bututun PTFE mai sarrafa kansa?
Bututun PTFE bututu ne na ciki mai ɗauke da carbon, wanda ake kira bututun mai sarrafa kansa saboda murfin carbon ɗinsa na iya sakin wutar lantarki mai tsauri da ake samarwa lokacin aiki.
2. Shin ina buƙatar amfani da bututun da ke sarrafa iska a aikace-aikacenmu?
Da farko dai, kana buƙatar fahimtar menene aikin bututun mai sarrafawa? Fagen aikace-aikace daban-daban suna da buƙatu daban-daban kan ko ana buƙatar tasirin mai sarrafawa. A halin yanzu, aikace-aikacen da aka fi amfani da su sune masana'antar kera motoci, aikace-aikacen jiragen sama da na lantarki. Idan kana buƙatar ƙarin shawarwari na ƙwararru, tuntuɓi ma'aikatan tallace-tallace.
Muna bayar da kayan da aka saba yi kamar haka
1. Jakar nailan ko jakar poly
2, Akwatin kwali
3. Pallet ɗin filastik ko na plywood
Ana cajin Marufi na Musamman
1, Katako mai siffar zobe
2, Akwatin katako
3, Sauran marufi na musamman kuma ana samun su
