Tuubada shidaalka ptfe ID 8MM*OD 12 | BESTEFLON
Tuubada Shidaalka ee PTFEwaa mid ku habboon shidaalka E85,EtanooliyoNitromethaneBirta adag ee aan miridhku lahayn ee dibadda lagu tidcay waxay bixisaa iska caabin waxyeello iyo iska caabin xoqid, waxayna ilaalisaa tuubooyinka gudaha ee PTFE.
Intaa waxaa dheer, sababtoo ah shidaalku waa dareere guban kara oo qarxa, tuubadayada shidaalka ee PTFE si gaar ah ayaa loo kaarbooneeyay, taas oo door weyn ka ciyaarta sii deynta korantada taagan waxayna ka fogaataa khasaarooyin aan loo baahnayn.
Tuubada shidaalka ee PTFE waxay leedahay isku-xidhnaan hoose oo is-xoqid ah, taasoo u oggolaanaysa heerarka socodka oo sarreeya iyo nadiifinta fudud, iyadoo sidoo kale gacan ka geysanaysa baabi'inta haraaga wasakhowga habka. Maaddadani waxay leedahay dabacsanaan, iska caabin kiimiko, gubasho la'aan iyo iska caabin kulaylka.
Inta badan kiimikooyinka iyo dareerayaasha, waxay sidoo kale leedahay xoog dielectric sare iyo firfircooni la'aan. Kuma habboona oo keliya warshadaha baabuurta, laakiin sidoo kale si weyn ayaa loogu isticmaalaa warshadaha, farsamaynta kiimikada, shaybaarrada guud, baabuurta, dahaarka iyo adeegyada cuntada.
Tuubada PTFE ee shidaalka waxay bixisaa saliidayn ugu dambeysa, isticmaalka heerkulka sare, iska caabbinta kiimikada, iswaafajinta noolaha iyo dulqaadka saxnaanta sii deynta. Maadaama dhexroorka gudaha uu yahay mid nadiif ah oo siman, tuubada PTFE waxay u oggolaanaysaa socod xor ah oo xaddidan.
Tuubooyinka shidaalka ee PTFEwaxay leeyihiin awood aad u yar oo ay ku galaan gaasaska iyo dareerayaasha. Ku dhawaad gebi ahaanba waa ka xor weerarka kiimikada, waxaana dib loogu isticmaali karaa ethylene oxide iyo autoclaves. Tuubada Fluoropolymer waxaa loo arkaa inay leedahay dabacsanaan sare, laakiin tuubada PTFE waxay leedahay dabacsanaan ugu fiican.
Tuubada shidaalka ee PTFE hadda waa tuubada shidaalka ugu khafiifsan uguna fudud. Waxay isku daraysaa tidcan bir ah oo aan lahayn laastikada oo heer sare ah oo 304 ah iyo tuubada PTFE ee gudaha siman si loo kordhiyo socodka. Qaab-dhismeedka dibadda ee adag wuxuu bixiyaa dabacsanaan cajiib ah. Tuubada gudaha ee PTFE waxay ku habboon tahay in loo isticmaalo shidaal kasta waxayna u adkeysan kartaa heerkulka ilaa 260 darajo Celsius. Tuubada PTFE ee birta aan lahayn ee Besteflon waxaa loo isticmaali karaa in lagu qooyo tuubada isticmaalka shidaalka.
Tilmaamaha badeecadeennu waa dhammaystiran yihiin, oo u dhexeeya 1/8 ilaa 2". Dhammaan agabka ceeriin ee aan isticmaalno waa tayo sare leh; sida DuPont, 3M, Daikin, iwm., iyo agabka ceeriin ee ugu sarreeya ee gudaha ayaa sidoo kale la heli karaa.
Tuubada BTFE ee BESTEFON waxay leedahay isku-xidhnaan hoose oo is-xoqid ah, taasoo u oggolaanaysa heerarka socodka oo sarreeya iyo nadiifinta fudud, iyadoo sidoo kale ka caawisa baabi'inta haraaga wasakhowga habka. Maaddadani waa mid dabacsan, u adkaysta daxalka kiimikada, aan guban karin, oo u adkaysta kulaylka. Waxa kale oo ay leedahay xoog dielectric sare iyo firfircooni badan oo loogu talagalay kiimikooyinka iyo dareerayaasha. Waxay ku habboon tahay warshadaha, farsamaynta kiimikada, shaybaarka guud, baabuurta, dahaarka, iyo codsiyada adeegga cuntada. Raadinta La Xiriira: Tuubada PTFE ee Siman, Tuubada Biriigga PTFE ee aan Birlabka lahayn
Tuubada Polytetrafluoroethylene (PTFE) ee loogu talagalay derbiga warshadaha ayaa si weyn loo isticmaalaa sababtoo ah iska caabbinta kulaylka ee aadka u fiican, iska caabbinta daxalka kiimikada, iyo waxqabadka dahaarka. Maadaama dhexroorka gudaha uu yahay mid nadiif ah oo siman, tuubada PTFE waxay u oggolaanaysaa socod xor ah oo xaddidan.tuubo PTFE ahGaaska iyo dareeraha aad bay u hooseeyaan. Polytetrafluoroethylene ku dhawaad gebi ahaanba kama xor aha weerarka kiimikada, laakiin xaalado gaar ah, waxaa saameyn doona biraha alkali iyo halogens. Tuubada Polytetrafluoroethylene waxay u adkaysataa kulaylka ilaa 500 digrii Fahrenheit waxaana dib loogu isticmaali karaa ethylene oxide iyo autoclave. Tuubooyinka Fluoropolymer waxaa loo arkaa inay aad u dabacsan yihiin, laakiin tuubooyinka PTFE waxay leeyihiin cimri dabacsanaan ugu fiican.
Kala duwanaanshaha Tuubada Dheer ee Siman
| Maya. | Dhexroorka gudaha | Dhexroorka dibadda | Derbiga Tuubada Dhumucda | Cadaadiska shaqada | Cadaadiska qaraxa | Gacanka ugu yar ee laabista | Faahfaahinta | cabbirka gacanta | ||||||
| (inji) | (mm±0.2) | (inji) | (mm±0.2) | (inji) | (mm±0.1) | (psi) | (baar) | (psi) | (baar) | (inji) | (mm) | |||
| ZXGM111-03 | 1/8" | 3.5 | 0.220 | 5.6 | 0.039 | 1.00 | 3582 | 247 | 14326 | 988 | 2.008 | 51 | -2 | ZXTF0-02 |
| ZXGM111-04 | 3/16" | 4.8 | 0.315 | 8.0 | 0.033 | 0.85 | 2936 | 203 | 11745 | 810 | 2.953 | 75 | -3 | ZXTF0-03 |
| ZXGM111-05 | 1/4" | 6.4 | 0.362 | 9.2 | 0.033 | 0.85 | 2646 | 183 | 10585 | 730 | 3.189 | 81 | -4 | ZXTF0-04 |
| ZXGM111-06 | 5/16" | 8.0 | 0.433 | 11.0 | 0.033 | 0.85 | 2429 | 168 | 9715 | 670 | 3.622 | 92 | -5 | ZXTF0-05 |
| ZXGM111-07 | 3/8" | 9.5 | 0.512 | 13.0 | 0.033 | 0.85 | 1958 | 135 | 7830 | 540 | 4.331 | 110 | -6 | ZXTF0-06 |
| ZXGM111-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | 1894 | 128 | 7395 | 510 | 5.157 | 131 | -7 | ZXTF0-06 |
| ZXGM111-10 | 1/2" | 12.7 | 0.630 | 16.0 | 0.039 | 1.00 | 2272 | 113 | 6818 | 450 | 7.165 | 182 | -8 | ZXTF0-08 |
| ZXGM111-12 | 5/8" | 16.0 | 0.756 | 19.2 | 0.039 | 1.00 | 1233 | 85 | 4930 | 340 | 8.307 | 211 | -10 | ZXTF0-10 |
| ZXGM111-14 | 3/4" | 19.0 | 0.902 | 22.9 | 0.039 | 1.00 | 1051 | 73 | 4205 | 290 | 13.307 | 338 | -12 | ZXTF0-12 |
| ZXGM111-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.039 | 1.00 | 870 | 60 | 3480 | 240 | 16.575 | 421 | -14 | ZXTF0-14 |
| ZXGM111-18 | 1" | 25.0 | 1.161 | 29.5 | 0.059 | 1.50 | 798 | 55 | 3190 | 220 | 21.220 | 539 | -16 | ZXTF0-16 |
| ZXGM111-20 | 1-1/8" | 28.0 | 1.299 | 33.0 | 0.059 | 1.50 | 725 | 50 | 2900 | 200 | 23.622 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22 | 1-1/4" | 32.0 | 1.496 | 38.0 | 0.079 | 2.00 | 653 | 45 | 2610 | 180 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26 | 1-1/2" | 38.0 | 1.732 | 44.0 | 0.079 | 2.00 | 580 | 40 | 2320 | 160 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32 | 2" | 50.0 | 2.224 | 56.5 | 0.079 | 2.00 | 435 | 30 | 1740 | 120 | 39.961 | 1015 | -32 | ZXTF0-32 |
* Buuxi heerka SAE 100R14.
* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.
| Magaca Summada: | BESTEFLON |
| Qalabka: | PTFE |
| Faahfaahinta: | 1/8'' ilaa 1'' |
| Dhumucda: | 0.85/1/1.2/1.5MM |
| Midabka tuubada gudaha: | caddaan caano leh/dabacsan |
| Heerkulka kala duwan: | -65℃--+260℃ |
| Silig tidcan: | Silig bir ah oo aan miridh lahayn oo 304/316 ah oo tidcan |
| Codsiga: | Qalabka kiimikada/Mashiinka//Gaaska la cadaadiyay/Maareynta shidaalka iyo saliidaha/Wareejinta uumiga/Nidaamyada Haydarooliga |
| Maya. | Dhexroorka gudaha | Dhexroorka dibadda | Derbiga Tuubada Dhumucda | Cadaadiska shaqada | Cadaadiska qaraxa | Gacanka ugu yar ee laabista | Faahfaahinta | cabbirka gacanta | ||||||
| (inji) | (mm±0.2) | (inji) | (mm±0.2) | (inji) | (mm±0.1) | (psi) | (baar) | (psi) | (baar) | (inji) | (mm) | |||
| ZXGM111-03 | 1/8" | 3.5 | 0.220 | 5.6 | 0.039 | 1.00 | 3582 | 247 | 14326 | 988 | 2.008 | 51 | -2 | ZXTF0-02 |
| ZXGM111-04 | 3/16" | 4.8 | 0.315 | 8.0 | 0.033 | 0.85 | 2936 | 203 | 11745 | 810 | 2.953 | 75 | -3 | ZXTF0-03 |
| ZXGM111-05 | 1/4" | 6.4 | 0.362 | 9.2 | 0.033 | 0.85 | 2646 | 183 | 10585 | 730 | 3.189 | 81 | -4 | ZXTF0-04 |
| ZXGM111-06 | 5/16" | 8.0 | 0.433 | 11.0 | 0.033 | 0.85 | 2429 | 168 | 9715 | 670 | 3.622 | 92 | -5 | ZXTF0-05 |
| ZXGM111-07 | 3/8" | 9.5 | 0.512 | 13.0 | 0.033 | 0.85 | 1958 | 135 | 7830 | 540 | 4.331 | 110 | -6 | ZXTF0-06 |
| ZXGM111-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | 1894 | 128 | 7395 | 510 | 5.157 | 131 | -7 | ZXTF0-06 |
| ZXGM111-10 | 1/2" | 12.7 | 0.630 | 16.0 | 0.039 | 1.00 | 2272 | 113 | 6818 | 450 | 7.165 | 182 | -8 | ZXTF0-08 |
| ZXGM111-12 | 5/8" | 16.0 | 0.756 | 19.2 | 0.039 | 1.00 | 1233 | 85 | 4930 | 340 | 8.307 | 211 | -10 | ZXTF0-10 |
| ZXGM111-14 | 3/4" | 19.0 | 0.902 | 22.9 | 0.039 | 1.00 | 1051 | 73 | 4205 | 290 | 13.307 | 338 | -12 | ZXTF0-12 |
| ZXGM111-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.039 | 1.00 | 870 | 60 | 3480 | 240 | 16.575 | 421 | -14 | ZXTF0-14 |
| ZXGM111-18 | 1" | 25.0 | 1.161 | 29.5 | 0.059 | 1.50 | 798 | 55 | 3190 | 220 | 21.220 | 539 | -16 | ZXTF0-16 |
| ZXGM111-20 | 1-1/8" | 28.0 | 1.299 | 33.0 | 0.059 | 1.50 | 725 | 50 | 2900 | 200 | 23.622 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22 | 1-1/4" | 32.0 | 1.496 | 38.0 | 0.079 | 2.00 | 653 | 45 | 2610 | 180 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26 | 1-1/2" | 38.0 | 1.732 | 44.0 | 0.079 | 2.00 | 580 | 40 | 2320 | 160 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32 | 2" | 50.0 | 2.224 | 56.5 | 0.079 | 2.00 | 435 | 30 | 1740 | 120 | 39.961 | 1015 | -32 | ZXTF0-32 |
* Buuxi heerka SAE 100R14.
* Badeecadaha gaarka ah ee macaamiisha ayaa nagala hadli kara si faahfaahsan.
Faa'iidada
Tuubada gudaha ee PTFE waxay leedahay taxane sifooyin aad u fiican
1) Isticmaalka muddada dheer ee heerkulka sare ee 200 ~ 260℃, heerkulka hooseeya wali waa jilicsan yahay oo u adkaysta - 100 ℃;
2) U adkaysta aqua regia iyo dhammaan dareerayaasha dabiiciga ah;
3) Cimilada/gabowga ugu fiican ee balaastikada;
4) Saliid badan, isku-darka ugu yar ee isku-dhafka balaastikada (0.04);
5) Xabag leh xiisad dusha sare ah oo ugu yar iyo walxo adag oo aan lahayn wax ku dheggan walax kasta;
6) Firfircooni la'aan jireed oo aan sun ahayn;
7) Waxqabad koronto oo aad u fiican, waa doorasho ku habboon agabka dahaarka fasalka C.
Na sii Email
sales02@zx-ptfe.com
Waxa kale oo laga yaabaa inaad jeceshahay
Dadku sidoo kale way weydiiyaan
Su'aal:Waa maxay gacanka laabashada?
Jawaab:Dhexroorka gudaha ee kala duwan wuxuu leeyahay radius kala duwan oo foorarsi ah. Waxaad tixraaci kartaa jadwalkayaga qeexitaanka badeecada ee u dhigma, kaas oo yeelan doona xuduudo. Ama waxaad la tashan kartaa ganacsigeenna, waxaanu ku siinaynaa jawaabo xirfad leh.
Su'aal:Waa maxay iska caabbinta heerkulka? Waxaan rabaa inaan ku isticmaalo jawi heerkul shaqo oo 200 ℃ ah, ma isticmaali karaa?
Jawaab:Mid ka mid ah astaamaha alaabtayadu waa iska caabbinta heerkulka sare, heerkulka shaqadu waa 65 ℃ ~ 260 ℃. Isticmaalka caadiga ah, cimriga adeeggu waa ilaa 50 sano ama ka badan. Waxaa loo isticmaali karaa 200 ℃. Guud ahaan waxaa lagula talinayaa inaad isticmaasho agab dibadda laga keeno, kuwaas oo noqon doona kuwo waara.
Waxaan bixinaa baakadaha caadiga ah sida soo socota
1, Bac naylon ah ama bac poly ah
2, Sanduuqa kartoonka
3. Baalal balaastig ah ama balaastig alwaax ah
Baakad la habeeyey ayaa la dallacayaa
1, Giraangiraha alwaaxa ah
2, Kiis alwaax ah
3, Baakado kale oo la habeeyey ayaa sidoo kale la heli karaa
