Soosaarayaasha khadka biriiga ee PTFE ee mootooyinka baabuurka |BESTEFlon
Tuubooyinka dareeraha dareeraha ee birta ah ee PTFE-ga waxaa loo aqoonsan yahay inay yihiin kuwa ugu cimri dheer alaabooyinka balaastikada ah.Waa iftiin, dabacsanaan, ka-hortagga daxalka, iska caabbinta cadaadiska sare iyo sifooyin kale oo aad u fiican, kuwaas oo si weyn loogu isticmaalo baabuurta mootooyinka.
AN3Tuubooyinka biriiga ee PTFEwaxaa laga soo saaray 100% bikrad PTFE resin, iyo tidcan oo leh 304/316 silig bir ah oo aan lahayn darajada 304/316 ee lakabka sare si loo kordhiyo cadaadiska tuubooyinka oo looga ilaaliyo tuubada gudaha dhaawaca xoogga dibadda.
Haddii loo baahdo, waxaan sidoo kale dabooli karnaa daahan ilaalinta PVC ee dibadda lakabka birta aan fiicnayn si ay si fiican u ilaaliyaan tuubooyinka.
Waxay ku habboon tahay dareeraha biriiga, qaboojiyaha, saliidda, shidaalka, shidaalka, E85, hawada iyo methanol;Heerkulka shaqada wuxuu u dhexeeyaa -65 ° ilaa 260 °.
Tuubbada gudaha ee PTFE ayaa ka dhigaysa tuubadan si aad uga adkeysi badan marka loo eego caagga caadiga ah ee Nitrile tuubada tidcan ee birta aan lahayni waa ka sii waarta.
Waxaa lagu isticmaali karaa daawaha aluminium ama birta aan ka sameysan banjo ee loogu talagalayTuubooyinka PTFE.
Haddii aad baahi u qabto alaabtayada, fadlan ila soo xidhiidh wixii macluumaad dheeraad ah.
Faahfaahinta Alaabta
| Magaca Summada: | BESTEFlon |
| Kala duwanaanta heerkulka: | − 65 ℃～ + 260 ℃ |
| Cadaadiska shaqada: | 225bar ~ 44bar |
| Cadaadis dilaac: | 900bar ~ 176bar |
| Qalab: | PTFE |
| Lakabka gudaha: | tuubada ptfe |
| Lakabka xoojinta: | tidcan bir ahama |
| Lakabka dibadda: | PVC, PUmadow, casaan, buluug, jaalle, guduud, hufan, cawl, oranji, iwm.) |
| Cabbirka tuubada | An3, an4, an6, an8, an10, an12, an16, an20 |
| Dhexroorka gudaha | 3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm |
| Dhexroorka dibadda | 6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm |
| Dhererka | dherer kasta |
Astaamaha tuubada bireega ee birta ah ee tidcan ee PTFE:
1.304 bir bir ah oo tidcan tuubada la xoojiyay
2. La kulan fmvs-106 iyo SAE 100 R14
3. Tijaabi tuubada biriiga kasta ilaa 3000 psi (207 bar ama 20.7mpa)
4. Cadaadiska dilaaca: ugu yaraan 7250 ama 50MPa (50MPa)
5. Kala duwanaanta heerkulka - 65 ℃～ + 260 ℃
La jaanqaadi kara dhibco3, DOT4 iyo DOT4 + dareerayaasha biriiga
Codsiga:
Nidaamka baabuurka ee baabuurka.
1. Tuubooyinkani waa safan yihiin PTFE, oo la jaan qaadaya dhammaan dareerayaasha biriiga, waxayna leeyihiin guryo bir ah oo tidcan si looga hortago xirashada iyo daxalka.Khadadkaan waxaa loogu talagalay inay u adkeystaan cadaadiska sare waxayna yihiin kuwo aad u jilicsan waxaana loo isticmaali karaa xaaladaha ugu walaacsan.Tuubooyinkan waxaa loo isticmaali karaa codsiyo kale oo badan sida cabbiraadaha cadaadiska, turbochargers iyo khadadka faakuumka
2. Alaabtu waxay u hoggaansamaysaa ISO 9001: 2008 iyo xakamaynta CE.Alaabooyinka tayada sare leh iyo macaamiisha
3. Qanacsanaantu waa raacdadeena.wada shaqayn daacad ah.Mustaqbal ifaya.
4. Xooji 304/316 dabool daboolka birta ah ee birta ah si aad u wanaajiso xoogga iyo adkeysiga, waxayna u adkeysan kartaa cadaadis shaqo oo sarreeya iyo jawi adag.Cadaadiska dilaaca ilaa 12000 PSI
Tignoolajiyada nidaamka saddex lakab ee fiilada tuubada hayrooliga ee si gaar ah loogu talagalay mootada iyo ATV
Sii bireega la isku halayn karo oo waara ama hab-qabsiga hydraulic mootada ama mootada afarta taayir leh.
Ku haboon mootooyinka intooda badan, baabuurta ka baxsan wadada, baabuurta baaldiyada, ATV baabuurta afarta taayir.
Waxa loo isticmaali karaa sidii xajin ama bireega tuubada hayrooliga.
TAXANAHA PTFE BRAKE HOSE
| Maya | Tilmaamid | Dhexroorka dibadda | Dhexroorka gudaha | Cadaadiska shaqada | Cadaadiska dilaaca | Laab laabashada ugu yar | |||||
| (inji) | (mm±0.2) | (inji) | (mm±0.1) | (psi) | (baar) | (psi) | (baar) | (inji) | (mm) | ||
| 1 | -3 | 1/4 | 6.35 | 9/64 | 3.56 | 3260 | 225 | 13040 | 900 | 3/76 | 1 |
| 2 | -4 | 5/16 | 8 | 3/16 | 4.83 | 2750 | 190 | 11000 | 760 | 1/30 | 0.85 |
| 3 | -6 | 27/64 | 10.92 | 21/64 | 8.13 | 2540 | 175 | 10160 | 700 | 1/30 | 0.85 |
| 4 | -8 | 35/64 | 13.72 | 27/64 | 10.67 | 2030 | 140 | 8120 | 560 | 1/30 | 0.85 |
| 5 | -10 | 5/8 | 16 | 33/64 | 12.95 | 1740kii | 120 | 6960 | 480 | 3/76 | 1 |
| 6 | -12 | 49/64 | 19.3 | 41/64 | 16.26 | 1270 | 88 | 5080 | 352 | 3/76 | 1 |
| 7 | -16 | 1-1/32 | 26.16 | 7/8 | 22.22 | 870 | 60 | 3480 | 240 | 1/21 | 1.2 |
| 8 | -20 | 1-9/32 | 32.77 | 1-1/8 | 28.57 | 630 | 44 | 2520 | 176 | 3/38 | 2 |
* La kulan heerka SAE 100R14
* Alaabooyinka gaarka ah ee macaamiisha ayaa laga yaabaa in nagala hadlo si faahfaahsan.
Baro wax badan oo ku saabsan alaabta BESTEFlon
Video
Dadku sidoo kale way waydiiyaan
Noogu soo dir e-mail
sales02@zx-ptfe.com
Tuubada PTFE ma loo isticmaali karaa xadhkaha biriiga?
PTFE Tubeiska caabinta daxalka, waa tuubo shidaal oo gaar ah, ma fududa in la gabowdo, shidaalku si fudud uma daadin doono. Markaa waxay ku habboon tahayTuubada Bireegamarka loo eego agabka kale.
Waa imisa xariiqda biriiga AN3?Khadka biriiga ee AN3?
OurAN3wuxuu leeyahay 2 cabbir oo aad doorato:
1. Aqoonsiga 3.2mm, OD 6.2mm.
2. Aqoonsiga 3.5mm, OD 6.5mm.
Waxaan bixinaa xirmo caadi ah sida soo socota
1. Bacda nylon ama bac
2, sanduuqa kartoonka
3
Baakadaha la habeeyey waa lagu dalacay
1
2. Kiis alwaax ah
3. Baakadaha kale ee la habeeyey ayaa sidoo kale la heli karaa
Fariintaada noo soo dir:
Qaybaha alaabta
-
1/8 ptfe bireega tuubada oo daboolan pvc |BSETEFLON
-
6an ptfe tuubada nidaamka bireega gaariga |B...
-
Daboolka tuubada tidcan ee AN8 ee nidaamka biriiga |UGU FIICAN...
-
Tuubada bireega PTFE ee baabuurka iyo mootada |BESTEFlon
-
Soosaarayaasha khadka biriiga ee PTFE ee mootooyinka baabuurka...
-
Tuubada PTFE iyo qalabka biriiga mootada |UGU FIICAN...
-
Tuubada bireega ptfe ee dabacsan ee tidcan |NOQO...
