Medium Pressure PTFE Smooth Bore Hose Manufacturer, Factory, Supplier In China
Besteflon Industrial Co., Ltd was founded in 2005, is one of the leading medium pressure PTFE smooth bore hose manufacturers, factories & suppliers in China, accepting OEM, ODM, SKD orders. We have rich experiences in production & research development for different ptfe medium pressure hose types. We focus on advanced technology, strict manufacturing step, and a perfect QC system.
Certifications: ISO9001:2015 │ RoHS Directive (EU) 2015/863 │ US FDA 21 CFR 177.1550 │ EU GHS SDS
Medium Pressure PTFE Smooth Bore Hose
The medium pressure PTFE smooth bore hose is composed of a 100% pure PTFE inner tube and one layer of 304 / 316 stainless steel wire braid. The tough stainless steel wire braid provides strength and protection to the inner tube and allows for excellent pressure ratings
As an OEM SAE100R14 manufacturer, our (PTFE) hose is available in pressure up to 3000 PSI, this medium pressure PTFE hoses has has an extremely long service life and it has excellent chemical stability. Because the PTFE tube is inert to chemicals, fuel oil, steam, solvents, synthetic lubricants, and hydraulic oils.
Choose Your Medium Pressure PTFE Smooth Bore Hose
Medium pressure smooth hole PTFE hose (3000 PSI) is widely used in demanding compressed gas and industrial applications. Its chemically resistant inert PTFE creates an almost "universal" hose capable of handling medium pressure applications of all (high temperature) and corrosive media. Such as chemical industry, hot melt glue, paper and pulp, hot press, steam, fuel oil, paint, machinery, and many other demanding applications. Similar limitations of rubber, metal, and synthetic hoses make PTFE hoses the only solution anywhere. Our custom, precision-machined fittings can provide truly reliable hose assemblies for all your demanding applications.
In addition, the Besteflon medium pressure smooth hose also provides non-conductive and conductive PTFE tube. Some applications require a conductive lining to dissipate the electrostatic charges. High resistivity fluid or gas at high velocity can form a positive charge inside the PTFE lining. If not dissipated to the end of the hose, the charge will accumulate until it passes through the tube wall to the braided layer, causing a catastrophic hose failure. To alleviate this problem, a carbon black conductive lining would be added to the inner tube wall.
Standard Wall PTFE Series
Inner tube: 100% virgin PTFE
Tube wall thickness: 0.7mm - 1.1mm (depending on size)
Reinforcement layer: Single layer high tensile stainless steel 304/316 wire braided
Temperature range: -65℃ ~ +260℃ (-85℉ ~ + 500℉), higher temperature, lower pressure
Properties:
a. Excellent high and low-temperature resistance
b. Excellent chemical resistance, oil resistance
c. Non-sticky, smooth surface, low friction coefficient
d. Weathering & Aging resistance
e. Light weight and more flexible than standard PTFE smooth bore hose
f. Comply with SAE100R14 standard
Applications:
Automotive, Hydraulic industry, Fluid handing, chemical transfer, paint, Pharmaceutical, food & beverage processing, cosmetics, and general-purpose applications.
Tips: Relatively thin wall thickness, suitable for use in not very high operating temperatures, to save your budget. If used at extremely high temperatures, the service life will be obviously reduced.
Standard Wall PTFE Hose Series Specs
| Item No. | Inner Diameter | Outer Diameter | Tube Wall Thickness |
Working Pressure | Burst Pressure | Minimum Bending Radius | Specification | Collar Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM121-03 | 1/8" | 3.2 | 0.236 | 6 | 0.033 | 0.85 | 3263 | 225 | 13050 | 900 | 0.787 | 20 | -2 | ZXTF0-02 |
| ZXGM121-04 | 3/16" | 4.8 | 0.287 | 7.3 | 0.028 | 0.7 | 2719 | 188 | 10875 | 750 | 1.181 | 30 | -3 | ZXTF0-03 |
| ZXGM121-05 | 1/4" | 6.4 | 0.354 | 9 | 0.028 | 0.7 | 2501 | 173 | 10005 | 690 | 1.181 | 30 | -4 | ZXTF0-04 |
| ZXGM121-06 | 5/16" | 8 | 0.433 | 11 | 0.028 | 0.7 | 2139 | 148 | 8555 | 590 | 1.575 | 40 | -5 | ZXTF0-05 |
| ZXGM121-07 | 3/8" | 9.5 | 0.488 | 12.4 | 0.028 | 0.7 | 1704 | 118 | 6815 | 470 | 2.362 | 60 | -6 | ZXTF0-06 |
| ZXGM121-08 | 13/32" | 10.3 | 0.524 | 13.3 | 0.028 | 0.7 | 1634 | 113 | 6525 | 450 | 3.150 | 80 | -7 | ZXTF0-07 |
| ZXGM121-10 | 1/2" | 12.7 | 0.626 | 15.9 | 0.031 | 0.8 | 1450 | 100 | 5800 | 400 | 5.906 | 150 | -8 | ZXTF0-08 |
| ZXGM121-12 | 5/8" | 16 | 0.756 | 19.2 | 0.031 | 0.8 | 1051 | 73 | 4205 | 290 | 7.087 | 180 | -10 | ZXTF0-10 |
| ZXGM121-14 | 3/4" | 19 | 0.890 | 22.6 | 0.039 | 1 | 888 | 61 | 3552.5 | 245 | 11.811 | 300 | -12 | ZXTF0-12 |
| ZXGM121-16 | 7/8" | 22.2 | 1.024 | 26 | 0.039 | 1 | 725 | 50 | 2900 | 200 | 10.236 | 260 | -14 | ZXTF0-14 |
| ZXGM121-18 | 1" | 25.4 | 1.161 | 29.5 | 0.043 | 1.1 | 653 | 45 | 2610 | 180 | 15.748 | 400 | -16 | ZXTF0-16 |
*Meet SAE 100R14 standard.
*Custom-specific probucts may be discussed with us for detailed.
*Contact us for more detailed specs on other series hoses.
Medium Wall PTFE Series series
Inner tube: 100% virgin / Conductive black PTFE
Temperature range: -65℃ ~ +260℃ (-85℉ ~ + 500℉), higher temperature, lower pressure
Tube wall thickness: 0.85mm - 1.5mm (depending on sizes)
Properties:
a. Excellent high and low temperature resistance
b. Excellent chemical resistance, oil resistance
c. Non-sticky, smooth surface, low friction coefficient
d. Weathering & Aging resistance
e. Light weight and more flexible than standard PTFE smooth bore hose
f. Comply with SAE100R14 standard
Applications:
Automotive, Hydraulic industry, Fluid handing, chemical transfer, paint, Pharmaceutical, food & beverage processing, cosmetics and general-purpose applications.
Tips： Under the same pressure conditions, it has a thicker wall thickness than the standard wall, and is suitable for applications where the working temperature is higher than 200℃.
Medium Wall PTFE Hose Series Specs (111series)
| Item No. | Inner Diameter | Outer Diameter | Tube Wall Thickness |
Working Pressure | Burst Pressure | Minimum Bending Radius | Specification | Collar Spec. | ||||||
| (inch) | (mm) | (inch) | (mm) | (inch) | (mm) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXGM111-03 | 1/8" | 3.5 | 0.264 | 6.7 | 0.039 | 1 | 3625 | 250 | 14500 | 1000 | 0.630 | 16 | -2 | ZXTF0-02 |
| ZXGM111-04 | 3/16" | 4.8 | 0.307 | 7.8 | 0.033 | 0.85 | 2972.5 | 205 | 11890 | 820 | 0.787 | 20 | -3 | ZXTF0-03 |
| ZXGM111-05 | 1/4" | 6.4 | 0.370 | 9.4 | 0.033 | 0.85 | 2718.75 | 187.5 | 10875 | 750 | 1.063 | 27 | -4 | ZXTF0-04 |
| ZXGM111-06 | 5/16" | 8 | 0.445 | 11.3 | 0.033 | 0.85 | 2356.25 | 162.5 | 9425 | 650 | 1.063 | 27 | -5 | ZXTF0-05 |
| ZXGM111-07 | 3/8" | 10 | 0.524 | 13.3 | 0.033 | 0.85 | 1885 | 130 | 7540 | 520 | 1.299 | 33 | -6 | ZXTF0-06 |
| ZXGM111-08 | 13/32" | 10.3 | 0.531 | 13.5 | 0.033 | 0.85 | 1812.5 | 125 | 7250 | 500 | 1.811 | 46 | -7 | ZXTF0-06 |
| ZXGM111-10 | 1/2" | 12.7 | 0.638 | 16.2 | 0.039 | 1 | 1631.25 | 112.5 | 6525 | 450 | 2.598 | 66 | -8 | ZXTF0-08 |
| ZXGM111-12 | 5/8" | 16 | 0.764 | 19.4 | 0.039 | 1 | 1160 | 80 | 4640 | 320 | 5.906 | 150 | -10 | ZXTF0-10 |
| ZXGM111-14 | 3/4" | 19 | 0.906 | 23 | 0.047 | 1.2 | 1015 | 70 | 4060 | 280 | 8.898 | 226 | -12 | ZXTF0-12 |
| ZXGM111-16 | 7/8" | 22.2 | 1.031 | 26.2 | 0.047 | 1.2 | 870 | 60 | 3480 | 240 | 9.646 | 245 | -14 | ZXTF0-14 |
| ZXGM111-18 | 1" | 25 | 1.173 | 29.8 | 0.059 | 1.5 | 725 | 50 | 2900 | 200 | 11.811 | 300 | -16 | ZXTF0-16 |
| ZXGM111-20 | 1-1/8" | 28 | 1.299 | 33 | 0.059 | 1.5 | 652.5 | 45 | 2610 | 180 | 23.622 | 600 | -18 | ZXTF0-18 |
| ZXGM111-22 | 1-1/4" | 32 | 1.496 | 38 | 0.079 | 2 | 561.875 | 38.75 | 2247.5 | 155 | 27.559 | 700 | -20 | ZXTF0-20 |
| ZXGM111-26 | 1-1/2" | 38 | 1.732 | 44 | 0.079 | 2 | 507.5 | 35 | 2030 | 140 | 31.496 | 800 | -24 | ZXTF0-24 |
| ZXGM111-32 | 2" | 50 | 2.205 | 56 | 0.079 | 2 | 435 | 30 | 1740 | 120 | 27.559 | 700 | -20 | ZXTF0-32 |
*Meet SAE 100R14 standard.
*Custom-specific probucts may be discussed with us for detailed.
*Contact us for more detailed specs on other series hoses.
What working environments are medium pressure hoses suitable for? What should we pay attention to?
PTFE hoses are ideal for flexible hoses, and they have excellent resistance to hot pressure pulses, bending, vibration, and aging. It can be used under harsh conditions of continuous bending and vibration without failure caused by bending fatigue.
The wide temperature range is from-65 F to 450 F and can be used continuously for a long time in low / high temperatures working environment.
Therefore, our PTFE hoses are well-suited for applications that require high and low temperatures, chemical resistance, low friction coefficient, flexibility, and non-aging properties. These medium pressure PTFE smooth bore hose all meet or exceed the SAE 100R14 standard.
But it is worth noting that these hoses are not recommended for high dynamic pressure loads. The working temperature will directly affect the working pressure. When our temperature is above 120 C, we have to consider the decompression coefficient：(Maximum working pressure = working pressure x coefficient)
Temperature: 120 C / 140 C / 160 C / 180 C / 200 C / 220 C.
Coefficient: 1.00 / 0.80 / 0.60 / 0.40 / 0.20 / 0.0
Don’t you find what you are looking for?
Just tell us your detailed requirements. The best offer will be provided.
Your PTFE Medium Pressure Hose Supplier
Have a Special Requirement?
Generally, we have common PTFE HOSE products and raw materials in stock. For your special demand, we offer you our customization service. We accept OEM/ODM. We could print your Logo or brand name on hose body. For an accurate quotation, you need to tell us the following information:
