Factory selling Ptfe Hose Assemblies - PTFE Hose Assemblies 5/16” ID For Oil Industry | BESTEFLON – Besteflon
Factory selling Ptfe Hose Assemblies - PTFE Hose Assemblies 5/16” ID For Oil Industry | BESTEFLON – Besteflon Detail:
PTFE Hose Assemblies 5/16’’ ID For Oil Industry
(1) Hose structure:
Transparent PTFE smooth bore tube + 0.3mm stainless steel 304/316 wire (adding one group of green stainless steel 304/316 wire)
(2) Hose dimension: 8mm ID x 11.4mm OD after braided, tube wall thickness is 0.85mm.
(3) Minimum bending radius: 25mm
(4) Working temperature: continuous temperature resistance – 65℃~+ 260℃.
(5) Max. Working pressure: 175 bar
(6) Min. Burst pressure: 689 bar
(7) Connectors details:
Material: stainless steel 304/316/316L;
Thread: JIC, NPT, UNF, AN, BSPT, BSPP, Metric, and etc.;
Types: female/male fitting, ANSI/JIS/EN/GB flange ends, sanitary coupling, and etc.
(8) Assembly: provide hose assembling service, can be produced according to customer’s drawings or requirements.
(9) Application: suitable for oil, rubber, plastic, clothing, automobile, machine tool, ship building, motor, paper, diesel engine and other industries to do hydraulic, pneumatic, steam transmission hose. It has better service performance and service life than other conveying hose for conveying liquid, gas and strong corrosive medium alternating with cold and hot.
Product Details
| Brand Name: | BESTEFLON |
| Processing Service: | Cutting, assembling, & crimping |
| Material: | 100% PTFE + stainless steel 316 wire |
| Inner layer: | Transparent PTFE tube |
| Reinforcing layer: | stainless steel 304/316 wire braiding |
| Other available sizes: | 1/8’’ to 1’’, DN 3 to DN 25 |
| Application: | Industrial/Hydraulic industry/hot runner systems/high-temperature pump applications and etc. |
| Certification: |
SGS, ISO9001:2015, FDA, MSDS |
| Temperature: |
− 65 ℃～ + 260 ℃ |
| Standard: | SAE100 R14 |
Learn more about BESTEFLON products
Custom PTFE Hose Assemblies
6an ptfe hose assembly
conductive ptfe hose
Video
People also ask：
2. What is PTFE convoluted hose
Give Us A E-Mail
sales02@zx-ptfe.com
Product detail pictures:
Related Product Guide:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Factory selling Ptfe Hose Assemblies - PTFE Hose Assemblies 5/16” ID For Oil Industry | BESTEFLON – Besteflon , The product will supply to all over the world, such as: Oman, Latvia, Kenya, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.
Question: Can someone please tell me the wall thickness?
Answer: About the wall thickness, we have the corresponding specification parameters in the details, you can refer to. At the same time, you can also consult our sales staff. The general algorithm of wall thickness is wall thickness = outer diameter – inner diameter, such as outer diameter of 3mm, inner diameter of 2mm, 3-2 = 1, and wall thickness of 1mm. But please read it carefully. You use the diameter, and you get the difference in diameter. If the inner diameter is assumed to be at the center of the outer diameter, divide by 2 to get the wall thickness. That’s where the safety factor comes from. If you give yourself a factor of safety of two, you’re ready. If the inside diameter deviates from the center, the wall actually thins.
Question:Does anyone have a problem? Did you use this when printing with nylon? I plan to print at 250 ℃ (482 ℃) for 8 hours. Is this pipe suitable?
Answer: Yes, this kind of pipe can be used at this working temperature.
Question: Will this happen? Install the geeetech a20t printer? I’m looking for a Burton tube, but I read that the other tubes are not suitable for the printer.
Answer: This tube is perfect for 3D printers! Now many manufacturers who manufacture or use 3D printers will buy this PTFE tube to replace their original 3D printer feeding tube. Because the PTFE material delivery pipe will be more durable and high temperature resistant, it is more suitable to be used as the feeding pipe of 3D printer, with long service life and long durability, which can reduce the pain of users who often need to replace the tube.
PTFE Tubing Is Widely Used For:
Wire harness applications
Fuel hoses/fuel tubing lines
Pharmaceutical applications
Advanced medical devices
High temperature industrial equipment
Chemical and analytical science applications
3D printing equipment
Typical accessories: always verify the compatibility of the material with the fluid being transported. Acetal pipe fittings (injection pipe diameter), compression tube fittings, Nylon / Brass / stainless steel barb fittings.
Details: unlike a typical hose, this material is measured on the outside diameter to accommodate fittings or compressors.
We offer the usual packing as follows
1、Nylon bag or poly bag
2、Carton box
3、Plastic pallet or plywood pallet
Customized Packaging is charged
1、Wooden reel
2、Wooden case
3、Other customized packaging also available
By Marina from moldova - 2018.06.18 19:26
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Hellyngton Sato from Iran - 2017.06.19 13:51
