A wide variety of braided brake hose options are available to you, such as An3,an4,an6,an8,an10,an12,an16,an20;Inner diameter:3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm;Outer diameter:6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm.Color:black www.besteflon.com are braided brake hose manufacturers, mainly located in Asia. The top supplying country or region is China, which supply 100% of brake hoses respectively. PTFE Brake Hose's Purpose:The main function of automobile brake pipe is to transmit brake medium in automobile braking, to ensure that the braking force is transmitted to the brake shoe or caliper to produce braking force, so that the brake can be effective at any time. Structure:The hydraulic brake hose assembly consists of a brake hose and a brake hose connector. There is a permanent connection between the brake hose and the brake hose joint, which is realized by the wrinkling or cold extrusion deformation of the joint part relative to the hose. performance requirement:Under the above test conditions, the hydraulic brake hose assembly or corresponding parts shall meet the performance requirements specified in this article when tested according to the following methods. Amount of bore passing after necking:1. Meet the standard of SAE j1401;2. Structure: PTFE + stainless steel wire braided outer layer;3. Oil and corrosion resistance, low expansion coefficient and high lubrication;4. Suitable for all kinds of cars, karts, ATVs, racing cars, etc;5. Export to Brazil, the United States, Germany, Britain, Australia, etc