1/8 ptfe brake hose with pvc covering | BSETEFLON
One of the great advantages of PTFE Brake Hose is its incredible flexibility.
When you need a tube to change direction, you can choose either to bend it or to place an adapter on it. This will have an impact on the flow rate and will also cause a drop in pressure. The more components you add, the higher overall cost will be. PTFE brake hose, on the other hand, have similar pressure capacity, but may not require joints and elbows.
Polytetrafluoroethylene (PTFE) is usually used as the main Fuel Line in jet airliners.
If the passenger plane encounters an accident, the fuel pipeline will not break under pressure, and eventually will not cause fire hazard. The flexibility of the hose means that you can easily handle the offset between two elements of the system. The hose is actually very important to the designer and the erector of the fluid system.
PTFE is a hard nut to crack.
It is usually corrosion resistant and easy to clean. If you use it correctly, it can have a long service life extended by decades. It is not as conductive as stainless steel tubes, so it provides additional strength and reliability.
Braided stainless steel PTFE hose is much more expensive than rubber hose.
You'll find that PTFE brake lines can only be seen on premium cars, such as hot sticks and super sports cars, or on racing cars, which you can find in formula one and RV series.
|Temperature range:||− 65 ℃～ + 260 ℃|
|Working pressure:||225bar ~ 44bar|
|Burst pressure:||900bar ~ 176bar|
|Inner layer:||ptfe hose|
|Reinforcing layer:||stainless steel wire braiding|
|Outer layer:||PVC, PU (black, red, blue, yellow, purple, transparent, gray, orange, etc.)|
|Hose size||An3, an4, an6, an8, an10, an12, an16, an20|
|Inner diameter||3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm|
|Outer diameter||6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm|
Features of stainless steel braided PTFE brake hose:
AN SERIES PTFE BRAKE HOSE
||Outer diameter||Inner diameter||Working pressure||Burst pressure||Minimum bending radius|
* Meet SAE 100R14 standard.
* Customer-specific products may be discussed with us for detailed.
You may also like
People also ask
When using our high-quality PTFE Hoses, compatible PTFE fittings must be used to ensure correct installation. These accessories are available in AN4, AN6, AN8, AN10, AN16, AN18 models, which can support all automotive fluids.
The PTFE reusable rotating hose end is easy to install and user friendly. With a special compression design, it can be reused without damaging the joint, and the threaded joint guide can prevent damage to the inner tube. The PTFE hose connector is mechanically clamped on the PTFE hose core to provide the greatest possible seal, and the stainless steel outer plate is clamped separately to achieve the greatest possible hose holding force
Give Us A E-Mail
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don’t pay the freight.
Q: What are your payment terms?
A: Advance payment < = US $1000, 100% in advance. Payment > = US $1000, 30% in advance, balance before shipment.
We offer the usual packing as follows
1、Nylon bag or poly bag
3、Plastic pallet or plywood pallet
Customized Packaging is charged
3、Other customized packaging also available