Bututun PTFE (Teflon) don sarrafa sinadarai daga Kamfanin Masana'antar Sinanci Mai Aminci (Besteflon)
Masana'antar Bututun PTFE na Sinadarai
Masana'antar sinadarai tana da babban buƙata don kayan bututun: juriya ga tsatsa. A matsayinta na ƙwararreBututun PTFE don Sarrafa SinadaraiKamfanin Besteflon, mai kera kayayyaki, ya samar wa kamfanonin sinadarai mafita na bututun PTFE masu jure wa acid mai ƙarfi, alkalis mai ƙarfi, sinadarai masu narkewa na halitta, da kuma masu hana iskar oxygen mai ƙarfi tsawon shekaru da yawa. Ana ƙera bututun PTFE na sinadaranmu daga resin PTFE mara kyau 100% ba tare da wani ƙarin kayan da aka sake yin amfani da su ba, wanda ke tabbatar da dacewa da sinadarai a matakin kayan. Jerin samfuranmu ya kama daga capillaries na matakin dakin gwaje-gwaje zuwa bututun masana'antu, tare da ƙayyadaddun bayanai da za a iya daidaita su bisa ga takamaiman yanayin aikace-aikacen. Manajan sayayya da injiniyoyin sarrafawa a masana'antun sinadarai za su iya tuntuɓar ƙungiyar fasaha tamu kai tsaye don shawarwarin zaɓi da ambato.
Bayani dalla-dalla na bututun PTFE don sarrafa sinadarai
Zaɓin tsarin bututun sinadarai yana buƙatar cikakken la'akari da nau'in matsakaici, yawan maida hankali, zafin jiki, matsin lamba, da kuma tsarin bututun. Jerin ƙayyadaddun bayanai masu zuwa suna wakiltar zaɓuɓɓuka gama gari donBututun PTFEana amfani da shi a masana'antar sinadarai; lokacin zabar takamaiman tsari, ana ba da shawarar a tuntuɓi injiniyoyin Besteflon bisa ga ainihin yanayin aiki.
| Paramita | Sjimre |
| Diamita na Ciki (ID) | 2 mm – 50 mm |
| Diamita na Waje (OD) | 4 mm – 54 mm |
| Kauri a Bango | 0.75 mm – 2 mm |
| Matsi na Aiki | Sanduna 2.5-sanduna 15 |
| Zafin Aiki | -65°C zuwa +260°C |
| Daidaiton Sinadarai | Yana jure wa kusan dukkan acid, alkalis, sinadarai masu narkewa na halitta, da kuma masu ƙarfi na oxidizing |
| Daidaiton Gogayya | 0.1 |
| Tsawon Daidaitacce | Mita 50-150 a kowace birgima (wanda za'a iya keɓance shi bisa ga takamaiman buƙatu) |
| Launi | Launin halitta (farin madara), mai haske, baƙi (matakin sarrafawa), launuka na musamman suna samuwa |
| Takaddun Shaida na yau da kullun | ISO9001; IATF16949; FDA; Rohs; SGS |
Bayanan Musamman
Sassan sarrafa sinadarai galibi suna buƙatar ma'auni marasa daidaito - kamar diamita na bututu na musamman don dacewa da hanyoyin haɗin kayan aiki da ake da su, kauri na bango mara tsari don yanayin aiki mai ƙarfi ko na injin, ko takamaiman tsayi don rage haɗin gwiwa a wurin. Besteflon yana goyan bayan keɓancewa gaba ɗaya.
Duk wani haɗin diamita na ciki da diamita na waje; ana iya keɓance ƙirar da ta dace.
matsakaicin kauri na bango na 2 mm; ya dace da bututun sinadarai masu ƙarfi ko aikace-aikacen injin tsotsa.
kauri na bango har zuwa 0.7 mm, wanda ake amfani da shi don ɗaukar samfuri mai ƙarancin matsin lamba ko bututun bincike.
yankewa daidai bisa ga buƙatun shigarwa; ana iya yin shawarwari kan haƙuri.
Yana haɗa da sinadarin carbon black filler don cimma juriyar saman 10⁶–10⁹ Ω, wanda ya dace da isar da kayan wuta ko abubuwan fashewa.
Me yasa bututun PTFE shine Mafi kyawun zaɓi don sarrafa sinadarai
Babban abin da ke haifar da lalacewar bututun mai a masana'antun sinadarai shine kusan ba makawa tsatsa kayan ta hanyar hanyar sadarwa. Bututun roba na iya faɗaɗawa da fashewa; bakin karfe na iya fama da tsatsa mai guba da chloride ke haifarwa; yayin da PP da PVDF ba sa aiki idan aka fallasa su ga sinadarai masu ƙarfi na oxidizing. Dalilin da ya sa PTFE ta zama "kayan bututun mai na ƙarshe" a masana'antar sinadarai shine cewa ta fi duk wasu zaɓuɓɓuka a cikin manyan ma'auni masu zuwa.
1. Juriyar Sinadarai
Ƙarfin haɗin carbon-fluorine a cikin PTFE ya kai har zuwa 485 kJ/mol, wanda hakan ya sa ya zama ɗaya daga cikin mafi ƙarfi a cikin haɗin sinadarai na halitta. Wannan Layer mai yawa na atom ɗin fluorine yana aiki kamar "sulke," kusan gaba ɗaya yana hana duk wani sinadaran da ke shiga, don haka yana ba PTFE cikakkiyar rashin ƙarfi a cikin yanayin sarrafa sinadarai.
• Sinadarin sulfuric mai ƙarfi (98%): Yana da cikakken jituwa; ba ya lalatawa kuma ba ya kumbura.
• Ruwan hydrochloric acid mai ƙarfi (37%): Ya dace sosai
• Ruwan sarki (HCl + HNO₃): Mai jituwa (nutsewa na dogon lokaci a ƙarƙashin wasu yanayi masu tsauri yana buƙatar kimantawa)
• Hydrofluoric acid (HF): PTFE yana ɗaya daga cikin kayan da za su iya jure wa HF.
• Sodium hydroxide (50%): Ya dace sosai
• Sinadaran sinadarai na halitta (acetone, ethanol, THF, dichloromethane, da sauransu): Sun dace sosai
• Sinadaran sinadarai na halitta (acetone, ethanol, THF, dichloromethane, da sauransu): Sun dace sosai
• Halogens (iskar chlorine, ruwan bromine): Ya dace da zafin ɗaki
2. Ayyukan Zafin Jiki
Sau da yawa halayen sinadarai suna faruwa a yanayin zafi mai tsanani. Bututun PTFE sun dace da yanayin zafi mai aiki daga -65°C zuwa +260°C, wanda a cikinsa halayen injina, juriyar sinadarai, da halayen lantarki suke dawwama:
• Ƙarfin aiki mai ƙarancin zafin jiki: A matakin -65°C, kayan ba ya fashewa ko kuma yana fuskantar lalacewar raguwa; ya dace da ɗaukar samfurin ƙananan zafin jiki da jigilar datti.
• Matsayin zafi mai yawa: Babu lalacewa idan aka ci gaba da amfani da shi a 200 °C; zai iya jure wa ɗan gajeren lokaci zuwa 260 °C.
• Juriyar zagayowar zafi: maimaita zagayowar dumama da sanyaya ba zai haifar da tsagewa ko wargajewar bangon bututu ba.
• Kwatanta da sauran kayan aiki: PVC yana laushi a yanayin zafi sama da 60°C; silicone yana lalacewa a yanayin zafi sama da 200°C; kuma PP yana lalacewa a yanayin zafi sama da 100°C.
3. Tsarkaka & Rashin Gurɓatawa
A cikin hanyoyin samar da sinadarai, dattin da aka zubar daga kayan bututu na iya haifar da ƙin yarda da samfura ko rashin bin ƙa'idodi; Tubes na PTFE suna nuna kyakkyawan aiki a wannan fanni.
• Yawan fitar da sinadarin ion na ƙarfe yana da ƙasa, wanda ya cika buƙatun sufuri na sinadarai masu inganci na semiconductor da na lantarki.
• Matsakaici mara sha
• Ba ya haifar da sinadarai masu rai; ya dace da ruwa mai tsarki da tsarin sinadaran reagent mai tsarki.
• Amfani da shi na dogon lokaci yana tabbatar da cewa babu wani canji ko canza launin fata, kuma baya lalata ingancin hanyar.
4. Ƙarancin Gaggawa & Tsaftace Kai
Ma'aunin PTFE na gogayya shine 0.1 kawai, ɗaya daga cikin mafi ƙasƙanci a cikin dukkan kayan daskararru. A cikin tsarin bututun sinadarai, wannan yana nufin:
• Matsakaici yana nuna ƙarancin juriya ga kwararar ruwa, wanda hakan ke rage yawan amfani da makamashin famfo.
• Ruwan da ke da yawan danko kuma yana iya gudana cikin tsari cikin sauƙi, wanda hakan ke rage haɗarin toshe bututu.
• Bangon ciki yana nuna rashin mannewa, wanda ke rage lokacin tsaftacewa da fiye da kashi 50% yayin sauyawar rukuni.
• Yana rage girman bututun mai da kuma tarin ragowar da ke cikinsa, ta haka ne yake tsawaita tsarin kula da bututun mai.
Nau'in Bututun PTFE don Aikace-aikacen Sinadarai
Aikace-aikacen sarrafa sinadarai sun bambanta sosai, kuma nau'in bututu ɗaya ba zai iya cika dukkan buƙatu ba. Besteflon yana ba da tsari guda shida na bututun PTFE daban-daban, kowannensu an tsara shi don magance takamaiman buƙatun bututun sinadarai.
PTFE Smooth Bore Tube
Bututun PTFE Mai Sanyi — Zaɓin da aka fi so don aikace-aikacen bututun sinadarai. Suna da santsi a bango na ciki da ƙarancin juriya ga ruwa, waɗannan bututun sun dace da yawancin hanyoyin sinadarai, gami da jigilar acid da alkali, canja wurin sinadarai, da cikewar reagent. Don ƙarin bayani, da fatan za a dubaPTFE Smooth Bore Tubeshafin samfur
PTFE Convoluted Tube
Ya dace da aikace-aikacen bututun sinadarai waɗanda ke buƙatar diyya mai sassauƙa, shaƙar faɗaɗa zafi, ko hanyar bututu mai lanƙwasa. Waɗannan bututun PTFE masu lanƙwasa na iya maye gurbin bututun ƙarfe masu lanƙwasa, suna ba da raguwar nauyi da kuma juriyar tsatsa. Don ƙarin bayani, da fatan za a dubaPTFE Convoluted Tubeshafin samfur
Tiyo Mai Lankwasawa na PTFE
Ƙarfafa ƙarfe mai kauri yana tallafawa isar da acid, alkalis, sinadarai masu narkewa na halitta da man fetur na E85 mai ƙarfi don ƙaura daga bututun mai, shaƙar girgiza da lanƙwasa akai-akai.
PTFE Mai Gudanar da Bututu
Lokacin jigilar sinadarai masu ƙonewa da fashewa (misali, acetone, ethanol, toluene, da sauransu), wannan bututun yana hana taruwar wutar lantarki mai tsauri wanda zai iya haifar da gobara. Juriyar saman:10⁶–10⁹Ω
PTFE Capillary Tube
Ana amfani da shi don layukan allura a cikin kayan aikin nazari, layukan haɗi don tsarin chromatographic, da isar da ƙananan reagents; diamita na ciki yana farawa daga 0.3 mm. Don cikakkun bayanai, da fatan za a dubaPTFE Capillary Tubeshafin samfur
Tiyo mai kauri na PTFE
An ƙera shi don aikace-aikacen bututun sinadarai waɗanda ke buƙatar ƙimar matsin lamba mafi girma (har zuwa sandar 275), yana da zuciyar PTFE ta ciki da kuma layin waje na kitso na bakin ƙarfe
Maɓallan Aiki Masu Mahimmanci
| A'a. | Ƙayyadewa | Diamita na waje | Diamita na Ciki | Kauri na Bangon Tube | Matsi na Aiki | Matsi na Fashewa | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | inci | mm | inci | mm | inci | psi | mashaya | psi | mashaya | ||
| 1 | 2 × 4 | 4 | 0.157 | 2 | 0.079 | 1 | 0.039 | 218 | 15.0 | 870 | 60 |
| 2 | 2.5 × 4 | 4 | 0.157 | 2.5 | 0.098 | 0.75 | 0.030 | 83 | 5.8 | 334 | 23 |
| 3 | 3 × 5 | 5 | 0.197 | 3 | 0.118 | 1 | 0.039 | 218 | 15.0 | 870 | 60 |
| 4 | 3.2 × 5.2 | 5.2 | 0.205 | 3.2 | 0.126 | 1 | 0.039 | 218 | 15.0 | 870 | 60 |
| 5 | 3.5 × 5.5 | 5.5 | 0.217 | 3.5 | 0.138 | 1 | 0.039 | 218 | 15.0 | 870 | 60 |
| 6 | 4 × 6 | 6 | 0.236 | 4 | 0.157 | 1 | 0.039 | 181 | 12.5 | 725 | 50 |
| 7 | 5 × 7 | 7 | 0.276 | 5 | 0.197 | 1 | 0.039 | 152 | 10.5 | 609 | 42 |
| 8 | 5 × 8 | 8 | 0.315 | 5 | 0.197 | 1.5 | 0.059 | 167 | 11.5 | 667 | 46 |
| 9 | 6 × 8 | 8 | 0.315 | 6 | 0.236 | 1 | 0.039 | 127 | 8.8 | 508 | 35 |
| 10 | 6.5 × 8.5 | 8.5 | 0.335 | 6.5 | 0.256 | 1 | 0.039 | 111 | 7.7 | 444 | 30.6 |
| 11 | 8 × 10 | 10 | 0.394 | 8 | 0.315 | 1 | 0.039 | 94 | 6.5 | 377 | 26 |
| 12 | 10 × 12 | 12 | 0.472 | 10 | 0.394 | 1 | 0.039 | 73 | 5.0 | 290 | 20 |
| 13 | 12 × 14 | 14 | 0.551 | 12 | 0.472 | 1 | 0.039 | 60 | 4.1 | 239 | 16.5 |
| 14 | 13 × 15 | 15 | 0.591 | 13 | 0.512 | 1 | 0.039 | 58 | 4.0 | 232 | 16 |
| 15 | 14 × 16 | 16 | 0.630 | 14 | 0.551 | 1 | 0.039 | 62 | 4.3 | 247 | 17 |
| 16 | 16 × 18 | 18 | 0.709 | 16 | 0.630 | 1 | 0.039 | 44 | 3.0 | 174 | 12 |
| 17 | 16 × 19 | 19 | 0.748 | 16 | 0.630 | 1.5 | 0.059 | 65 | 4.5 | 261 | 18 |
| 18 | 19 × 21 | 21 | 0.827 | 19 | 0.748 | 1 | 0.039 | 44 | 3.0 | 174 | 12 |
| 19 | 19 × 22 | 22 | 0.866 | 19 | 0.748 | 1.5 | 0.059 | 65 | 4.5 | 261 | 18 |
| 20 | 19 × 23 | 23 | 0.906 | 19 | 0.748 | 2 | 0.079 | 73 | 5.0 | 290 | 20 |
| 21 | 20 × 22 | 22 | 0.866 | 20 | 0.787 | 1 | 0.039 | 36 | 2.5 | 145 | 10 |
| 22 | 20 × 23 | 23 | 0.906 | 20 | 0.787 | 1.5 | 0.059 | 51 | 3.5 | 203 | 14 |
| 23 | 20 × 24 | 24 | 0.945 | 20 | 0.787 | 2 | 0.079 | 69 | 4.8 | 276 | 19 |
| 24 | 25 × 28 | 28 | 1.102 | 25 | 0.984 | 1.5 | 0.059 | 36 | 2.5 | 145 | 10 |
| 25 | 25 × 29 | 29 | 1.142 | 25 | 0.984 | 2 | 0.079 | 51 | 3.5 | 203 | 14 |
| 26 | 32 × 36 | 36 | 1.417 | 32 | 1.260 | 2 | 0.079 | 36 | 2.5 | 145 | 10 |
| 27 | 38 × 42 | 42 | 1.654 | 38 | 1.496 | 2 | 0.079 | 36 | 2.5 | 145 | 10 |
| 28 | 50 × 54 | 54 | 2.126 | 50 | 1.969 | 2 | 0.079 | 36 | 2.5 | 145 | 10 |
• Ya yi daidai da ƙa'idar SAE 100R14.
• Ana samun girma dabam-dabam da ƙayyadaddun bayanai. Da fatan za a tuntuɓe mu don tattauna takamaiman buƙatunku.
Yi aiki kai tsaye tare da masana'anta don haɓaka riba da inganci
A matsayinmu na babbar masana'antar kera kayayyakin bututun ptfe, ƙungiyarmu ta farko a masana'antar tana da fiye da shekaru 20 na gwaninta a fannin bincike da haɓaka bututun teflon. Kasuwancinmu ya shafi ƙasashe sama da 50, yana ba da ingantattun ayyukan fitarwa ga abokan cinikinmu.
Sarrafa Inganci da Masana'antu
Tsarin bututun sinadarai yana da matuƙar tsauri don daidaiton inganci—rashin lahani guda ɗaya a cikin bututu na iya haifar da rufe dukkan layin samarwa ko ma haifar da haɗarin tsaro. Tsarin kula da inganci na Besteflon, wanda ya fara daga kayan aiki zuwa kayayyakin da aka gama, yana tabbatar da cewa kowace mita ta bututun za ta iya jure ƙalubalen da muhallin sinadarai ke haifarwa.
tsarin masana'antu
Manna Extrusion: PTFE resin an gauraye shi da extrusion additives sannan a fitar da shi ta hanyar wani mutu
Tsarin tsarkakewa: Yana tabbatar da narkewar resin gaba daya da kuma hade sarkokin kwayoyin halittarsa sosai, ta haka ne ake samun ingantattun kayan aikin injiniya da kwanciyar hankali na sinadarai.
Tsarin Kitso: Kamfaninmu yana amfani da haɗin injinan kitso na tsaye da na kwance, wanda ke ba mu damar daidaita yawan kitso da ƙayyadaddun waya na bakin ƙarfe bisa ga ƙayyadaddun bututun da yanayin aikace-aikacen da suka dace.
Kowace rukuni za ta yi gwaje-gwaje masu zuwa kafin ta bar masana'antar:
Bukatun duba gani na waje: bututun za su kasance ba tare da kumfa, tsagewa, ƙazanta, ko bambancin launi ba; cikakken binciken kayayyakin da aka gama zai haɗa da ID, OD, kauri na bango, da tsayi; za a gudanar da gwajin juriya ga matsin lamba bisa ga ƙayyadaddun abokan ciniki ko ƙa'idodin masana'antu; za a kuma yi ƙarin gwaje-gwaje masu tsauri, gami da gwajin matse iska, gwajin riƙe matsin lamba na hydrostatic, gwaje-gwajen tabbatarwa daban-daban (kamar gwajin matsin lamba mai yawa da gwajin fashewar hydrostatic), da kuma gwajin gajiya mai lanƙwasa, duk an yi su ne don tabbatar da bin ƙa'idodin samfurin masana'antar fluoropolymer.
Aikace-aikacen Sarrafa Sinadarai
PTFE Tube vs Sauran Kayan Aiki don Ayyukan Sinadarai
Bututun PTFEana amfani da su sosai a duk faɗin sarkar darajar masana'antar sinadarai, tun daga saitunan dakin gwaje-gwaje har zuwa samar da masana'antu. Waɗannan sun bayyana muhimman yanayi guda shida na aikace-aikace:
A duk waɗannan masana'antu, juriyar zafin jiki na bututun PTFE muhimmin abu ne wanda ke tabbatar da amincinsu, dorewarsu, da amincinsu a cikin aikace-aikacen da ake buƙata.
Sufurin Acid da Alkali
Bututun PTFEsuna wakiltar mafi mahimmancin mafita ga buƙatun bututun mai a masana'antun sinadarai. Don jigilar mai nisa da kuma auna ma'aunin kafofin watsa labarai masu lalata sosai kamar sulfuric acid mai ƙarfi, hydrochloric acid, nitric acid, phosphoric acid, da sodium hydroxide mafita, bututun PTFE sune mafi kyawun madadin bututun ƙarfe na bakin ƙarfe da bututun da aka lulluɓe da filastik.
• Fa'idodi: Mai jure tsatsa, tare da tsawon rai fiye da na bakin karfe sau 5-10, kuma babu buƙatar maye gurbinsa lokaci-lokaci.
• Yanayin aiki na yau da kullun: bututun jigilar sinadarin sulfuric acid, haɗi tsakanin tankunan ɗaukar acid, da bututun allurar sinadarai don rage tasirinsa.
OrganicSman zaitunStsarin
Ana amfani da sinadarai masu narkewar halitta sosai wajen hada sinadarai da kuma tsarkake su. Bututun PTFE suna nuna rashin daidaito ga dukkan sinadarai masu narkewar halitta kuma ba za su haifar da gazawar bututun ba saboda kumburi ko narkewa.
• Fa'idodi: Babu kumburi, babu ruwan sama, kuma babu gurɓataccen tsarkin samfurin.
• Yanayin aiki na yau da kullun: layin ciyar da sinadarin reactor, bututun haɗa shafi na distillation, bututun dawo da sinadarin solvent
CorrosiveGas Tmayar da martani
Don jigilar bututun mai da kuma nazarin samfuran iskar gas mai gurbata muhalli kamar chlorine, hydrogen chloride, ammonia, da hydrogen sulfide; matsewar iskar gas da juriyar tsatsa na bututun PTFE sun sanya su zaɓi mafi kyau ga bututun iskar gas.
• Fa'idodi: Rashin shigar iskar gas (bututu mai kauri); bangon bututun ba ya lalacewa da iskar gas.
• Yanayin aiki na yau da kullun: bututun watsa iskar gas ta chlorine, bututun tace iskar gas, da bututun ɗaukar samfurin iskar gas
Magunguna da Injiniyan Halittu
Amfani da ruwa a cikin hada sinadarin magunguna masu aiki (API), samar da hadadden magani, da kuma hanyoyin hada sinadarai masu aiki. Bututun PTFE sun cika ka'idojin masana'antar magunguna dangane da tsarki, tsafta, da kuma bin ka'ida.
• Fa'idodi: Rashin ruwan sama, ba ya mannewa, mai sauƙin tsaftacewa da kuma tsaftace shi, kuma yana bin ƙa'idodin FDA/USP.
• Yanayin aiki na yau da kullun: bututun canja wurin API, bututun tsaftacewa na CIP, bututun haɗin bioreactor, tsarin tacewa.
Maganin Ruwa da Kare Muhalli
Tsarin bututun da ake amfani da su wajen sarrafa sharar gida da kuma tsarin shirya ruwa mai tsafta. Sinadaran kamar PAC (Polyaluminum Chloride), PAM (Polyacrylamide), da masu kula da acid-base—waɗannan sinadarai suna da matuƙar lalata kayan bututu na gargajiya—duk da hakaBututun PTFEba za su taɓa su ba kwata-kwata.
• Fa'idodi: Yana jure wa sinadarai masu lalata, tsawon rai, kuma ba ya buƙatar kulawa
• Yanayin aiki na yau da kullun: bututun allurai, bututun haɗin tsarin RO, bututun hana ruwa shara
Dakunan gwaje-gwaje da Kayan Aikin Bincike
Don samfuran layin gabatarwa da layukan ruwa na kayan aikin nazari kamar HPLC (High Performance Liquid Chromatography), ICP (Inductively Coupled Plasma) spectrometers, da ion chromatographs; babban tsarki da ƙarancin sharar bututun PTFE suna tabbatar da cewa sakamakon bincike ba su shafi tsangwama ta bututun ba.
• Fa'idodi: Ruwan sama na ƙarfe yana da ƙarancin gaske, wanda ke tabbatar da cewa babu wani tsangwama ga nazarin alamun.
• Yanayin aiki na yau da kullun: layin allurar HPLC, layin allurar nebulizer na ICP, layin iskar gas mai ɗaukar kaya na GC, layin fitar da ruwa mai shara
Lokacin zabar kayan da za a yi amfani da su wajen amfani da bututun sinadarai, ba PTFE kaɗai ba ce zaɓin da ake da shi. Kowane abu yana da takamaiman yanayin aikace-aikacensa; zaɓin ya dogara ne akan cikakken ciniki tsakanin nau'in matsakaici, zafin jiki, matsin lamba, da farashi.
| Halaye | PTFE | FEP | PFA | PP | PVDF | Bakin Karfe 316L | Gilashi |
|---|---|---|---|---|---|---|---|
| Matsakaicin Zafin Aiki | 260°C | 200°C | 260°C | 100°C | 150°C | 800°C | 500°C |
| Juriya ga Ƙarfin Acid | Madalla sosai | Mai Kyau Sosai | Madalla sosai | Abin karɓa | Mai Kyau Sosai | Ba a yarda da shi ba (Mai saurin kamuwa da cutar Cl⁻) | Mai Kyau Sosai |
| Juriya ga Alkalis Masu Ƙarfi | Madalla sosai | Mai Kyau Sosai | Madalla sosai | Abin karɓa | Mai Kyau Sosai | Ba a yarda da shi ba | Ba a yarda da shi ba |
| Juriya ga Magungunan Halitta | Madalla sosai | Mai Kyau Sosai | Madalla sosai | Ba a yarda da shi ba | Mai Kyau Sosai | Mai Kyau Sosai | Mai Kyau Sosai |
| Juriya ga Masu Ƙarfin Oxidizing | Mai Kyau Sosai | Abin karɓa | Mai Kyau Sosai | Ba a yarda da shi ba | Mai kyau | Ba a yarda da shi ba | Ba a yarda da shi ba |
| Tsarkaka | Mai Girma Sosai | Babban | Mai Girma Sosai | Abin karɓa | Babban | Matsakaici (Ruwan Karfe) | Babban |
| Bayyana gaskiya | Ba a Fahimta Ba | Mai gaskiya | Rabin haske | Rabin haske | Rabin haske | Ba a Fahimta Ba | Mai gaskiya |
| sassauci | Abin karɓa | Mai kyau | Mai kyau | Abin karɓa | Abin karɓa | Tauri | Tauri |
| Haɗin Narkewa Mai Zafi | No | Ee | Ee | Ee | Ee | Walda | No |
| Farashin Nau'i (Dangantaka) | Matsakaici | Babban | Mai Girma Sosai | Ƙasa | Babban | Matsakaici | Babban |
Shawarwarin Zaɓe
• Cikakken bayani game da sinadarai masu ƙarfi, tushe masu ƙarfi, da abubuwan narkewa → PTFE(Faɗin nau'in haƙurin sinadarai)
• Yana buƙatar lura da ruwa na ciki → FEP ko PFA
• Ana buƙatar walda mai zafi don rage ɗigon ruwa a gaɓoɓi. → PFA ko FEP (Ba za a iya haɗa PTFE da zafi ba.)
• Takaddun kasafin kuɗi; yanayi mai sauƙi. → PP
• Tsarkakakken tsarki + mai jure zafi mai yawa + mai narkewar zafi → PFA (Amma yana da mafi girman farashi.)
• Mai jure zafi mai yawa da kuma juriya ga tsatsa, tare da ƙarfin ɗaukar matsi mai yawa → Bakin Karfe 316L (amma yana da saurin kamuwa da ions na chloride)
• Ya kamata a sa ido kan yadda aikin amsawar ke aiki. → Gilashi (amma mai rauni kuma ba mai jure matsin lamba ba)
Mafi kyawun Masana'antar PTFE Tube & Masana'anta
Mun ƙware aPTFE santsi huda bututu，bututun ptfe mai sarrafawa,pbututun tfe mai kauri, bututun birki na ptfeda kuma haɗa bututun ptfe na tsawon shekaru 20. Muna da kayan aikin samarwa da tsarin gwaji. Ana sayar da samfuranmu masu inganci da farashi mai kyau a gida da waje.
Bugu da ƙari, duk kayan aikinmu an zaɓe su ne daga samfuran da suka cancanta, kamar suChemours (wanda a da DuPont ne), DAIKIN, alamar gida mai daraja.
Ga wasu dalilan da ya sa abokan ciniki ya kamata su zaɓi kamfaninmu na Besteflon don bututun Teflon mai zafi:
1. Mai ƙera kai tsaye mai shekaru 20 na ƙwarewa
- Mu masana'anta ne kai tsaye da suka ƙware a fannin bututun PTFE. Tare da sama da shekaru 20 na gwaninta a masana'antar, mun inganta hanyoyin samar da kayayyaki don tabbatar da inganci da aminci mafi girma.
- Kwarewarmu mai zurfi tana nufin za mu iya sarrafa aikace-aikace iri-iri da kuma ba da shawarwari na ƙwararru.
2. Kayan PTFE Mai Tsarkakakke 100%
- An yi bututun PTFE ɗinmu daga PTFE tsantsa 100%, wanda ke tabbatar da kyakkyawan juriya ga sinadarai, ƙarancin gogayya, da kuma juriya mai yawa.
- Wannan kayan aiki mai inganci yana tabbatar da aiki mai ɗorewa da aminci a aikace-aikace daban-daban na masana'antu.
3. Tsarin Inganci Mai Tsauri
- Muna kula da ingantaccen inganci a duk lokacin da ake samarwa, tun daga zaɓin kayan aiki har zuwa dubawa na ƙarshe.
- Ana gwada kowace bututu sosai don cika ƙa'idodin masana'antu da buƙatun abokan ciniki, don tabbatar da inganci mai kyau.
4. Keɓancewa na OEM
- Muna bayar da cikakkun ayyukan keɓancewa na OEM don biyan buƙatunku na musamman.
- Ko kuna buƙatar tsayin daka ko kayan aiki na musamman, za mu iya tsara samfuranmu don dacewa da aikace-aikacenku daidai.
5. Cibiyar Tallace-tallace ta Duniya
- Ana sayar da kayayyakinmu a cikin gida da kuma ƙasashen waje, tare da kasancewa mai ƙarfi a manyan kasuwannin ƙasashen waje, musamman Turai da Amurka.
- Muna da abokan ciniki masu yawa da kuma kyakkyawan tarihin da aka samu a kasuwar duniya.
6. Ƙungiyar Sadarwa ta Ƙwararrun Turanci
- Ƙungiyar ƙwararrunmu masu himma suna iya magana da Turanci sosai, suna tabbatar da sadarwa da tallafi cikin sauƙi.
- Za mu iya bayar da shawarwari na fasaha, farashi, da sabis na bayan-tallace-tallace a cikin Turanci, wanda hakan ke sauƙaƙa wa abokan cinikin ƙasashen waje su yi aiki tare da mu.
7. Faɗin Aikace-aikace
- Bututun PTFE ɗinmu sun dace da masana'antu daban-daban, ciki har da sarrafa sinadarai, magunguna, motoci, sararin samaniya, da sauransu.
- Sun dace da aikace-aikace waɗanda ke buƙatar sassauci mai yawa, juriya ga sinadarai, da juriya ga zafin jiki.
Zaɓe mu don buƙatun bututun PTFE ɗinku kuma ku amfana daga ƙwarewarmu, inganci, da isa ga duniya. Mun himmatu wajen samar muku da mafi kyawun samfura da ayyuka don biyan buƙatunku.
Takardar Shaidar
IS09001:2015 | Jagorar RoHS (EU) 2015/863 | USFDA21 CFR 177.1550 | EU GHS SDS | ISO/TS 16949
FDA
IATF16949
ISO
SGS
Sami Farashin Jumla & Buƙatun Musamman
Tambayoyin da ake yawan yi game da bututun PTFE don sarrafa sinadarai
T1: Shin bututun PTFE za su iya ɗaukar hydrofluoric acid (HF)?
A: Eh. PTFE yana ɗaya daga cikin ƙananan kayan da za su iya jure wa hydrofluoric acid lafiya a yawan da ya kai kashi 49% da kuma yanayin zafi har zuwa 260°C. Ba kamar bakin ƙarfe, gilashi, da yawancin robobi ba, PTFE ba ya nuna raguwar da za a iya aunawa idan aka fallasa shi ga HF. Ana amfani da bututun PTFE na sinadarai sosai a cikin aikin etching na semiconductor da aikace-aikacen narkewar acid inda HF babban reagent ne.
Q2: Menene matsakaicin zafin aiki na bututun PTFE a cikin sabis na sinadarai?
A: Bututun PTFE na iya aiki akai-akai a 200°C ba tare da asarar halayen injiniya ko juriya ga sinadarai ba. Shafawa na ɗan gajeren lokaci har zuwa 260°C abin karɓa ne. Ba kamar bututun roba ko silicone da ke lalacewa a yanayin zafi mai yawa ba, PTFE tana kiyaye amincinta a duk tsawon lokacin zafinta. Ga hanyoyin sinadarai da ke aiki sama da 200°C, PTFE sau da yawa shine kawai zaɓin bututun polymer da ake da shi.
T3: Har yaushe bututun PTFE ke dawwama a yanayin sarrafa sinadarai?
A: A ƙarƙashin yanayin aiki na yau da kullun (cikin yanayin zafi, matsin lamba, da dacewa da sinadarai), bututun PTFE yawanci suna ɗaukar shekaru 5-10 ko fiye. PTFE ba ya tsufa, ya lalace, ko ya zama mai rauni akan lokaci kamar madadin roba ko filastik. Babban yanayin gazawar sune lalacewar injiniya (rushewa, lanƙwasawa da yawa) ko aiki a waje da sigogin da aka kimanta. A cikin masana'antun sinadarai da yawa, bututun PTFE sun fi kayan aikin da suke bayarwa.
T4: Za a iya amfani da bututun PTFE don aikace-aikacen sinadarai masu tsarki sosai?
A: Eh. Bututun PTFE ɗinmu masu tsabta suna nuna ƙarancin matakan fitar da ion na ƙarfe da ƙarancin ƙimar fitar da carbon (TOC) na halitta. Sun dace da isar da sinadarai na matakin semiconductor, canja wurin reagent na matakin lantarki, da hanyoyin ruwa na kayan aiki na nazari. Don aikace-aikacen da suka fi buƙata, muna ba da maki na musamman da aka tsaftace kuma aka shirya.
T5: Shin kuna bayar da bututun PTFE masu hana kumburi don sabis na narkewa mai ƙonewa?
A: Eh. Lokacin da ake canja wurin sinadarai masu ƙonewa kamar acetone, ethanol, ko toluene, tarin caji mai tsauri na iya haifar da haɗarin ƙonewa. Bututun PTFE ɗinmu masu aiki suna da juriya a saman 10⁶–10⁹ ohms, wanda ke wargaza wutar lantarki mai tsauri cikin aminci. Ana amfani da waɗannan bututun sosai a tsarin canja wurin sinadarai, layukan fenti, da ayyukan cike ganga na sinadarai.
T6: Ta yaya zan haɗa bututun PTFE a cikin tsarin bututun sinadarai?
A: Hanyoyin haɗawa da aka saba amfani da su sun haɗa da: (1) Kayan haɗa matsi - mafi shahara ga ƙananan bututu zuwa matsakaicin diamita; (2) Kayan haɗa matsi - don aikace-aikacen matsi mai girma; (3) Haɗin flange - don manyan bututun diamita; (4) Kayan haɗa barb mai matsa lamba - don ƙananan bututun matsi. Muna kuma samar da kayan haɗin bututu da aka riga aka haɗa da kuma kayan haɗin bututu. Zaɓin ya dogara da matsin lamba, diamita na bututu, da kuma yawan katsewa.
T7: Shin sinadarin sinadarai yana shiga ta bangon bututun PTFE?
A: A yanayin zafi da matsin lamba na yau da kullun, PTFE yana da kyakkyawan juriya ga shigar sinadarai cikin ruwa. Duk da haka, a yanayin zafi mai yawa (sama da 200°C) tare da wasu ƙananan ƙwayoyin halitta, wasu shigar sinadarai na iya faruwa na tsawon lokaci. Don aikace-aikacen da suka shafi sinadarai masu zafi ko sinadarai masu guba sosai, muna ba da shawarar yin amfani da bututun bango mai kauri don rage haɗarin shiga ruwa.
T8: Shin bututun PTFE za su iya jure wa injin tsotsewa da matsin lamba a cikin ayyukan sinadarai?
A: Eh. Bututun PTFE na iya jure cikakken aikin injin tsotsar ruwa da matsin lamba mai kyau har zuwa matsin lamba mai kyau ga kowane girma. Don aikin injin tsotsar ruwa, ana ba da shawarar bututun bango masu kauri don hana rugujewa. Bututun PTFE ɗinmu masu nauyi (kauri bango 3mm+) an ƙera su musamman don zagayowar matsin lamba/bakin iska mai wahala a cikin injinan tace sinadarai da tsarin tacewa.
T9: Wadanne takaddun shaida da takardu za ku iya bayarwa?
A: Muna bayar da takardar shaidar kula da inganci ta ISO 9001:2015, bin ka'idojin FDA don hulɗa da abinci/magani, bin ka'idojin RoHS ga kasuwannin Turai, da kuma rahotannin gwaji na ɓangare na uku (SGS) idan an buƙata. Ana samun rahotannin kimanta daidaiton sinadarai ga takamaiman kafofin watsa labarai idan an buƙata.
Q10: Menene mafi ƙarancin adadin oda don bututun PTFE na sinadarai?
A: Ga girman da aka saba, babu mafi ƙarancin oda. Ga takamaiman takamaiman bayanai, MOQ ya dogara da sarkakiya, yawanci yana farawa daga dozin mita. Muna tallafawa ƙananan umarni na gwaji don ku iya tabbatar da samfurin a cikin ainihin sabis ɗin sinadarai kafin ku yi alƙawarin siyan siyayya.
