Moetsi le Mofani oa Mohala oa Mafura oa Ptfe Chaena
Moetsi oa Mohala oa Mafura oa PTFE oa Boleng bo Holimo | E Ikhethileng le e Thekisoang ka Bongata
Besteflonke khamphani e ikgethileng ka tlhahiso le phepelo yaHose ea peterole ea PTFE (polytetrafluoroethylene)E tumme ka lihlahisoa tsa eona tsa boleng bo holimo le lits'ebeletso tse ikhethileng.
Jwalo ka moetapele indastering, Besteflon e shebane le R&D, tlhahiso le thekiso yaLiphaephe tsa PTFEle lihlahisoa tse amanang le tsona, tse sebeletsang mafapha a mangata a kang likoloi, lifofane le indasteri.
Litlhaloso tse Tloaelehileng bakeng sa Mohala oa Mafura oa PTFE
An6 (bophara ba kahare ba 3/8"): e loketse bakeng sa lits'ebetso tse akaretsang tsa ntlafatso ea ts'ebetso ea likoloi le liphetoho.
Mohala oa mafura oa 8an PTFE (bophara ba 1/2" kahare): e loketse litsamaiso tsa mafura a phallang haholo le lits'ebetso tsa mabelo.
An10 (bophara ba kahare ba 5/8"):e loketse lits'ebetso tsa phallo e phahameng le khatello e phahameng, joalo ka likoloi tsa mabelo tse sebetsang hantle kapa mechini e boima.
| Mofuta oa Hose | Mohala oa peterole oa PTFE oa Tšepe e sa Khaotseng e Lohiloeng |
| Boholo ba Hose | AN6,AN8,AN10, |
| Bophara ba ka Hare | 8mm, 10.8mm, 13mm |
| Thepa ea ka Hare (Sehlohlolo) | PTFEphaephe |
| Thepa ea Kantle (E koahetsoeng ka ho otloloha) | Tšepe e sa Hloekeng - 304/316 |
| Thepa ea Kantle (Ea Kantle) | Nylon Loid (e Ntšo)，e putsoa, rabara ea silicone) |
| Mocheso o tlase | -70°C, -94°F |
| Mocheso o phahameng ka ho fetisisa | 250°C, 482°F |
| Khatello ea Ts'ebetso | 3000 PSI, BAR ea 206.8 |
| Khatello e Phatlohileng | 10000 PSI, 689.5 BAR |
| Bonyane ba Kobeho ea Radius (90°) | 40mm, 1.6" |
| Ho lumellana ha Mokelikeli | Peterole,, E10, E85, Mafura a Race, Methanol, Disele, Nitrous Oxide, Enjene le Oli ea Hydraulic, Moea, CO2, Pholisetsang, Metsi, Brake & Clutch Fluid (DOT) |
Na ha o fumane seo o se batlang?
Re bolelle feela litlhoko tsa hau tse qaqileng. Tlhahiso e ntle ka ho fetisisa e tla fanoa.
Tse latelang ke liparamente tse tloaelehileng tsa tekheniki tsa hose ea mafura ea PTFE
Litekanyetso tsa tekheniki tsa hose ea mafura ea PTFE li kenyelletsa haholo-holotshebetso ya thepa, boholo, kgatello e hanelang, mefuta ya mocheso le dintlha tse ding.
Lera le ka hare: polytetrafluoroethylene (PTFE)), ka botsitso bo matla ba lik'hemik'hale, ho hanyetsa mafome le ho hanyetsa mocheso o phahameng.
Lera le ka ntle:hangata e matlafatsoa kakhoele ea tšepe e sa hloekang (kapa Kevlar Fiber Braid), e fanang ka matla a phahameng le ho hanyetsa khatello. Lera le ka ntle le lona le ka ba lePVC kapa likarolo tse ling tse sireletsangho thibela ho tsofala le ho silafala ha kantle.
Mocheso o sebetsang:mocheso o sebetsang oa hose ea mafura ea PTFE hangata o pakeng tsa-65° Lebelo la 260° CMefuta e meng ea liphaephe tsa PTFE e ka sebelisoa maemong a mocheso o phahameng.(ho fihlela ho 300°C), empa mofuta o loketseng o hloka ho khethoa ho latela boemo bo itseng ba kopo.
Khanyetso ea mocheso oa nako e khuts'oane:liphaephe tse ling tsa mafura tsa PTFE li ka mamella mocheso ho fihlela ho260 ° Cka nako e khutšoanyane.
Khatello ea ho sebetsa:kgatello ya ho sebetsa hangata e pakeng tsa1500 psi (hoo e ka bang 103 bar) le 3000 psi (hoo e ka bang 207 bar),ho latela bophara ba phaephe ea mafura ea PTFE le thepa ea ka ntle ea matlafatso. Mefuta e meng e ka mamella khatello e phahameng 'me e loketse litsamaiso tsa ho tsamaisa mafura tse nang le khatello e phahameng.
Khatello e phatlohileng:Kgatelelo e phatlohileng ya hose ya peterole ya PTFE hangata e phahame haholo ho feta kgatelelo e sebetsang, eo hangata e leng ho fetamakhetlo a 3ea khatello ea ho sebetsa.
Bophara ba ka hare:phaephe ea peterole ea ptfe ea bophara ba ka hare hangata e tloha ho3 mm ho isa ho 25 mmBophara ba ka hare bo tloaelehileng ke5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm le 19 mm.
Bophara ba kantle:bophara ba kantle bo itshetlehile ka botenya ba lebota la hose ya ka hare ya PTFE le tshebediso ya thepa e lohilweng ka ntle. Bophara bo tlwaelehileng ba kantle bo tloha ho10 mm ho isa ho 30 mm.
Mohlala, liphaephe tse tloaelehileng tsa mafura tsa PTFE tsaMohala oa peterole oa PTFE oa 6, An8, An10le litlhaloso tse ling li na le bophara ba ka hare bo tsamaellanang leLi-inch tse 3/8, 1/2 inch le 5/8 inchka ho latellana.
Phaephe ea mafura ea PTFE e na le khanyetso e matla ea ho bola ho hoo e ka bang mafura ohle a tloaelehileng, lik'hemik'hale, li-solvent, mafura le likhase. Ha e angoe ke asiti, alkali, oli, khase, joala, jj., 'me e sebelisoa haholo indastering ea likoloi, ea lifofane, ea lik'hemik'hale le masimong a mang.
Radiyo e nyane e kobehang ya hose ya mafura ya PTFE hangata e pakeng tsaKa makhetlo a 3 bophara ba kahare le ka makhetlo a 5bophara ba kahare. Mohlala, hose ya peterole ya PTFE e nang leBophara ba kahare ba 6 mm bo na le radius e kobehileng bonyane ea 18 mm ho isa ho 30 mm. Fkapa liphaephe tse bophara bo boholo, radius e kobehang e hloka ho ba kholoanyane.
Thepa ea PTFE e na le coefficient e tlase haholo ea khohlano, e leng se etsang hore e be le ho tsofala ho fokolang phetisong ea mokelikeli o lebelo le phahameng. Sebopeho sa ka ntle sa matlafatso a lohiloeng sa hose ea mafura ea PTFE (joalo ka braid ea tšepe e sa hloekang kapa Kevlar Braid) se ntlafatsa ho hanyetsa ha eona ho tsofala 'me se ka ikamahanya le tikoloho e mpe ea mosebetsi likoloing kapa mechining.
Setifikeiti sa ISO 9001:netefatsa taolo ea boleng le botsitso ba sehlahisoa ts'ebetsong ea tlhahiso.
SAE J1401:Liphaephe tse ling tsa mafura tsa PTFE li fihlela maemo ana 'me li loketse tsamaiso ea ho tsamaisa peterole, diesel le mafura a mang.
Tšireletso ea mahlaseli a kotsi a UV:Liphaephe tse ling tsa mafura tsa PTFE li sebelisa liphaephe tse khethehileng ho thibela botsofali ba liphaephe bo bakoang ke mahlaseli a UV.
Mosebetsi o khahlanong le ho se fetohe:litsamaisong tse ling tse sebetsang hantle, liphaephe tsa mafura tsa PTFE li ka ba le mosebetsi o khahlanong le ho se fetohe ho thibela likotsi tse ka bang teng tse bakoang ke ho bokellana ha motlakase.
Lisebelisoa tsa likoloi le tsa mabelo:E loketse liphaephe tsa mafura tsa likoloi tsa mabelo le likoloi tse sebetsang hantle ka lebaka la ho hanyetsa khatello ea eona e ntle le ho hanyetsa mocheso o phahameng.
Bakeng sa sistimi ea mafura a lifofane, e ka mamella mocheso le khatello e phahameng haholo.
Tsamaiso ea lik'hemik'hale tsa indasteri:e sebelisoa haholo indastering ea lik'hemik'hale, meriana, lijo le tse ling, e ka tsamaisa mefuta eohle ea lik'hemik'hale le maro a senyang ka mokhoa o sireletsehileng.
Melemo ea Mehala ea Mafura ea Ptfe
Khanyetso ea Lik'hemik'hale:
PTFE e hanela lik'hemik'hale tse fapaneng haholo, ho kenyeletsoa mafura, oli le metsoako e qhibilihang. Sena se etsa hore mela ea mafura ea PTFE e be khetho e ntle bakeng sa libaka tseo ho tsona ho pepesehelang lintho tse senyang ho atileng.
Ho Tsitsisa ha Mocheso o Phahameng:
PTFE e ka mamella mocheso o feteletseng(ho fihlela ho 260°C kapa 500°F), e leng se etsang hore e lokele ho sebediswa dienjeneng tse sebetsang hantle kapa ditsamaisong tse pepeseditsweng mocheso.
Bokaholimo bo sa khomareleng:
Thepa e sa khomareleng ea PTFE e thibela ho bokellana ha lithōle le varnish ea mafura, e leng se netefatsang phallo e boreleli ea mafura le nako e telele ea mela.
Ho Tšoarella le Matla:
Mehala ea PTFE e matlafatsoa ka tšepe e sa ruseng e lohiloeng kapa thepa e 'ngoe ho ntlafatsa matla le ho tšoarella ha tsona, ho netefatsa hore li ka sebetsana le lits'ebetso tsa khatello e phahameng ntle le ho hloleha.
Ho tenyetseha:
Mehala ea mafura ea PTFE e tenyetseha 'me e ka fetisoa habonolo libakeng tse patisaneng, e leng se etsang hore ho kenngoa ha eona ho be bonolo ha ho bapisoa le mehala ea mafura e thata.
Polokeho:
Hobane PTFE ha e sebetse hantle ebile ha e senyehe habonolo maemong a thata, e fokotsa kotsi ea tšilafalo ea mafura le ho lutla ha metsi, e leng se etsang hore e be khetho e sireletsehileng bakeng sa litsamaiso tsa mafura tse nang le khatello e phahameng.
Leha ho le jwalo, mehala ya mafura ya PTFE e ka bitsa tjhelete e ngata ho feta rabara ya setso kapa mefuta e meng ya mehala ya mafura. Hangata di sebediswa dikoloing tse sebetsang hantle kapa tsa mabelo, ditshebedisong tsa difofane, le dibakeng tse ding tse hlokang tjhelete e ngata.
Ke hobane'ng ha u khetha Besteflon e le mofani oa hau oa peterole oa PTFE?
Bokgoni ba Theknoloji ea PTFE:
Ka boiphihlelo ba lilemo tse ngata, Besteflon ke moetapele ea tšepahalang tlhahisong ea PTFE, ea ikhethang ka mehala ea mafura e sebetsang hantle.
Ho iketsetsa:
Besteflon e fana ka ditharollo tse feto-fetohang tse ikgethileng, e netefatsang hore dihlahiswa di fihlela ditlhoko tse nepahetseng tsa botekgeniki.
Litheko tse Tlhōlisanoang:
Ebang o reka ka bongata kapa ka bongata, Besteflon e netefatsa hore o fumana dihlahiswa tsa boleng bo hodimo ka theko e hlwahlwa.
Phihlello ea Lefatše ka Bophara:
Besteflon e na le boteng bo matla ba machaba, e romela dihlahiswa tsa yona kantle ho naha lefatsheng ka bophara, e netefatsa hore dihlahiswa di tla romelwa ka nako le tshehetso ya bareki.
Setifikeiti sa Netefatso
Besteflon ke k'hamphani ea profeshenale le e hlophisitsoeng ka molao. Nakong ea nts'etsopele ea k'hamphani, re ntse re bokella boiphihlelo ka ho tsoelang pele le ho ntlafatsa boemo ba rona ba tekheniki, 'me re ikemiselitse ho fa bareki lihlahisoa le lits'ebeletso tsa boleng bo holimo.
FDA
IATF16949
ISO
SGS
Lipotso Tse Botsoang Khafetsa Mabapi le Mohala oa Mafura oa PTFE
Mehala ea mafura ea PTFE (Polytetrafluoroethylene) e sebelisoa hangata lits'ebetsong tse fapaneng tsa ts'ebetso e phahameng ka lebaka la ho tšoarella ha eona, ho hanyetsa lik'hemik'hale le botsitso ba mocheso. PTFE ke fluoropolymer e tsejoang ka thepa ea eona e sa khomareleng le ho hanyetsa mafome, e leng se etsang hore e be e loketseng ho tsamaisa mafura, oli le lik'hemik'hale tse ling libakeng tsa likoloi, lifofane le liindasteri.
Ke thepa efe e sebelisoang bakeng sa mohala oa mafura oa PTFE?
Methapo ea mafura ea PTFE e entsoe ka Polytetrafluoroethylene (PTFE), fluoropolymer e sebetsang hantle e tsejoang ka ho hanyetsa lik'hemik'hale ka tsela e ikhethang, botsitso ba mocheso, le thepa ea eona e sa khomareleng. Ho ntlafatsa ho tšoarella le ts'ebetso, karolo ea mantlha ea PTFE hangata e matlafatsoa ka lera le ka ntle le lohiloeng ka tšepe e sa ruseng kapa nylon. Kaho ena e fana ka khanyetso e phahameng khatellong e phahameng, mocheso o feteletseng, le ho lumellana le mefuta e mengata ea mafura, ho kenyeletsoa peterole, diesel, E85, le biofuel.
Ka hare ke Polytetrafluoroethylene (PTFE)
Ka ntle ke tšepe e sa ruseng e lohiloeng/PU/PVC/Silicone/Glass Fiber/Nylon/EPDM/Polyester/Aramid Fiber
Thempereichara ea hose ke bokae?
Mefuta ea mocheso: Mefuta ea mocheso ke:- 65 ° C ho isa ho 260 ° C
Phaephe e sebetsa ho mofuta ofe oa peterole?
Joalo ka peterole, diesel, ethanol, asiti e matla le alkali, jj.)
Hangata hose e sebelisa mofuta ofe oa sehokelo?
E ka hokahanngoa le sehokelo, sehokelo sa JIC, kapa lihokelo tse ling tse etselitsoeng motho ka mong
Ke maemo afe a machaba ao e a latelang?
E fetile SAE j1401, ISO 9001, ROHS, US FDA, EUGHS SDS)
