Masu kera layin birki na PTFE don babur | BESTEFLON
Ana gane bututun ruwa na birki na PTFE mai kauri a matsayin mafi ɗorewa a cikin kayayyakin filastik. Yana da sauƙi, sassauƙa, hana tsatsa, juriya ga matsin lamba da sauran kyawawan halaye, waɗanda ake amfani da su sosai a cikin babura.
AN3 ɗinmuBututun birki na PTFEAna fitar da su daga resin PTFE mai inganci 100%, sannan a kiɗe su da waya mai ƙarfe mai nauyin 304/316 a kan layin waje don ƙara matsin lamba na bututun da kuma kare bututun ciki daga lalacewar ƙarfi na waje.
Idan ya cancanta, za mu iya rufe murfin kariya na PVC na waje na bakin karfe don kare bututun da kyau.
Ya dace da ruwan birki, mai sanyaya, mai, mai, fetur, E85, iska da methanol; zafin aiki yana tsakanin -65° zuwa 260°.
Bututun ciki na PTFE yana sa wannan bututun ya fi ƙarfi fiye da roba ta yau da kullun. Bututun ƙarfe mai kauri na Nitrile ya fi ƙarfi.
Ana iya amfani da shi tare da kayan haɗin banjo na aluminum ko kayan haɗin banjo na bakin ƙarfe waɗanda aka ƙera donBututun PTFE.
Idan kuna da buƙatar samfuranmu, da fatan za a tuntuɓe ni don ƙarin bayani.
Cikakkun Bayanan Samfura
| Sunan Alamar: | BESTFLON |
| Yanayin zafin jiki: | − 65 ℃～ + 260 ℃ |
| Matsi na aiki: | 225 mashaya ~ 44 mashaya |
| Matsin fashewa: | 900bar ~ 176bar |
| Kayan aiki: | PTFE |
| Layer na ciki: | bututun ptfe |
| Layer mai ƙarfafawa: | kitso na waya na bakin karfe |
| Layin waje: | PVC, PU (baƙar fata, ja, shuɗi, rawaya, shunayya, haske, launin toka, lemu, da sauransu) |
| Girman bututu | An3, an4, an6, an8, an10, an12, an16, an20 |
| Diamita na ciki | 3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm |
| Diamita na waje | 6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm |
| Tsawon | kowane tsayi |
Siffofin bututun birki na PTFE mai kauri da bakin karfe:
1.304 bututun ƙarfe mai ƙarfi
2. Haɗu da ƙayyadaddun bayanai na fmvs-106 da SAE 100 R14
3. Gwada kowace bututun birki zuwa 3000 psi (sanduna 207 ko 20.7mpa)
4. Matsin fashewa: mafi ƙarancin 7250 ko 50MPa (50MPa)
5. Yanayin zafin jiki − 65 ℃～ + 260 ℃
Yana aiki da dot3, DOT4 da DOT4 + ruwayen birki
Aikace-aikace:
Don tsarin birki na abin hawa.
1. Waɗannan bututun an yi musu layi da PTFE, sun dace da duk wani ruwa na birki, kuma suna da rufin ƙarfe mai lanƙwasa don hana lalacewa da tsatsa. An tsara waɗannan layukan don jure matsin lamba mai yawa kuma suna da sassauƙa sosai kuma ana iya amfani da su a cikin yanayi mafi wahala. Ana iya amfani da waɗannan bututun a wasu aikace-aikace da yawa kamar ma'aunin matsin lamba, turbochargers da layukan injin tsabtace ruwa.
2. Samfurin ya yi daidai da ISO 9001:2008 da kuma ikon sarrafa CE. Kayayyaki masu inganci da na abokan ciniki
3. Gamsuwa ita ce burinmu. Haɗin gwiwa na gaskiya. Makomarmu mai kyau.
4. Ƙarfafa murfin waya mai ƙarfe 304/316 don inganta ƙarfi da dorewa, kuma yana iya jure matsin lamba mai yawa da yanayi mai tsauri. Matsi mai fashewa har zuwa 12000 PSI
Fasahar tsarin Layer uku kebul na bututun hydraulic wanda aka tsara musamman don babura da ATV
Samar da ingantaccen tsarin birki ko tsarin clutch mai ƙarfi ga babur ɗinku ko babur mai ƙafa huɗu.
Ya dace da yawancin babura, motocin da ba a kan hanya ba, motocin bokiti, da motocin ATV masu ƙafa huɗu.
Ana iya amfani da shi azaman bututun hydraulic na kama ko birki.
TUSHEN BIRKI NA PTFE
| A'a. | Ƙayyadewa | Diamita na waje | Diamita na ciki | Matsin aiki | Matsin fashewar | Mafi ƙarancin radius mai lanƙwasa | |||||
| (inci) | (mm±0.2) | (inci) | (mm±0.1) | (psi) | (mashaya) | (psi) | (mashaya) | (inci) | (mm) | ||
| 1 | -3 | 1/4 | 6.35 | 9/64 | 3.56 | 3260 | 225 | 13040 | 900 | 3/76 | 1 |
| 2 | -4 | 5/16 | 8 | 3/16 | 4.83 | 2750 | 190 | 11000 | 760 | 1/30 | 0.85 |
| 3 | -6 | 27/64 | 10.92 | 21/64 | 8.13 | 2540 | 175 | 10160 | 700 | 1/30 | 0.85 |
| 4 | -8 | 35/64 | 13.72 | 27/64 | 10.67 | 2030 | 140 | 8120 | 560 | 1/30 | 0.85 |
| 5 | -10 | 5/8 | 16 | 33/64 | 12.95 | 1740 | 120 | 6960 | 480 | 3/76 | 1 |
| 6 | -12 | 49/64 | 19.3 | 41/64 | 16.26 | 1270 | 88 | 5080 | 352 | 3/76 | 1 |
| 7 | -16 | 1-1/32 | 26.16 | 7/8 | 22.22 | 870 | 60 | 3480 | 240 | 1/21 | 1.2 |
| 8 | -20 | 1-9/32 | 32.77 | 1-1/8 | 28.57 | 630 | 44 | 2520 | 176 | 3/38 | 2 |
* Cika ƙa'idar SAE 100R14.
* Za a iya tattauna samfuran da suka shafi abokan ciniki tare da mu don ƙarin bayani.
Ƙara koyo game da samfuran BESTFLON
Bidiyo
Mutane kuma suna tambaya
Ba Mu Imel
sales02@zx-ptfe.com
Za a iya amfani da bututun PTFE don layin birki?
Bututun PTFEjuriyar tsatsa, bututun mai ne na musamman, ba shi da sauƙin tsufa, man ba zai zube cikin sauƙi ba. Don haka ya fi dacewa daTube na birkifiye da sauran kayan.
Menene girman layin birki na AN3? Menene girman?Layin Birki na AN3?
NamuAN3yana da girma dabam dabam guda biyu don zaɓar:
1. ID 3.2mm, OD 6.2mm.
2. ID 3.5mm, OD 6.5mm.
Muna bayar da kayan da aka saba yi kamar haka
1. Jakar nailan ko jakar poly
2, Akwatin kwali
3. Pallet ɗin filastik ko na plywood
Ana cajin Marufi na Musamman
1, Katako mai siffar zobe
2, Akwatin katako
3, Sauran marufi na musamman kuma ana samun su
Aika mana da sakonka:
Nau'ikan samfura
-
Bututun birki na ptfe 1/8 tare da murfin PVC | BSETEFLON
-
Haɗa bututun ptfe na 6an don tsarin birkin mota | B...
-
Murfin Tiyo Mai Riga AN8 don Tsarin Birki | KYAUTA...
-
Bututun birki na PTFE don mota da babur | BESTEFLON
-
Masu kera layin birki na PTFE don babur ɗin mota ...
-
Bututun PTFE da kayan birki na babur | KYAUTA...
-
Bututun birki mai sassauƙa na bakin ƙarfe mai lanƙwasa | BE...
