Special Price for Ptfe Inner Convoluted Hose Extension - PTFE Corrugated Hose Kink Resistance Braided Factory | BESTEFLON – Besteflon

Benefits:

High working and burst pressures; Most economical of all hoses with PTFE; The low-friction surface of smoothbore hose provides for high flow rates; Easily drained and/or cleaned.

The objective in the pipeline design, the assembly can achieve the following purposes: absorbing vibration, suppressing the noise transmitted by rigid pipe, adapting to reciprocating and bending motion, and adjusting or correcting the micro-vibration. The pitch of the hose can be varied to meet the performance requirements rating in terms of flexibility and pressure.

The purpose of the stainless steel braid is to prevent elongation. The braided fabric is made of stainless steel wire, and the braiding tension is generated by the braiding pressure to provide radial and axial constraints. The multi-braided assembly adapts to higher pressures.

Bestflon brand PTFE hose has data sizes ranging from 3 / 16 “to 2″. Stainless steel braided PTFE bellows have a pressure range of up to 2944 psi, depending on size and operating conditions. Temperature components depend on construction and design and can operate from – 65 ° C to + 260 ° C.

Inside wall

thin-walled, spiral-corrugated white PTFE

Braiding

single stainless steel 304 wire braiding

Temperature range

from -65 to +260 ºC(-85°F—500°F)

Couplings

press-fitted couplings in any design and material type

Characteristics

Agile/Corrosion resistance/Antisticking agent/Temperature resistance/Suitable for pressure and vacuum/Suitable for high mechanical strength

Product Details

Convoluted Hose Range

* Meet SAE 100R14 standard.

* Customer-specific products may be discussed with us for detailed.

Production workshop

To Get More Detailed Information And To Choose The Best Solution For Your Application, Please Contact Our Experts.

You may also like

People also ask

How to cut the PTFE hose to avoid damaging the pipe?

In order to achieve the above purpose, the utility model provides the following technical scheme: a cutting device for the manufacture of polytetrafluoroethylene pipes, including a worktable, the upper surface of the worktable is provided with a bracket, the center of the lower surface of the support is fixedly connected with a hydraulic cylinder, the output shaft of the hydraulic cylinder is fixedly connected with a cutter, and the center of the upper surface of the worktable is provided with a first groove The first groove is located directly below the cutter, one side of the first groove is provided with a second groove, the second groove is provided with a first plate body, the outer wall of the first plate body is uniformly installed with a first slide block, the first sliding block slides in the second groove, one side of the first plate body away from the first groove is fixedly connected with a rocker The front surface of the worktable is provided with a third groove, the rocker is located in the third groove, the first groove is provided with a limit plate, one side of the limit plate far away from the first groove is fixedly connected with a bearing, the back surface of the worktable is provided with a threaded through hole, and the screw rod is connected with the thread in the threaded through hole.cut the PTFE hose

We offer the usual packing as follows

1、Nylon bag or poly bag

2、Carton box

3、Plastic pallet or plywood pallet

Customized Packaging is charged

1、Wooden reel

2、Wooden case

3、Other customized packaging also available