Haɗa Bakin Karɓar Tushen PTFE Birki da Ƙarshen Hose
Mataki na 1
Kunna tiyo a kusa da yanke tare da madaurin fiber gilashi.Yi amfani da abin yanka ko hacksaw mai kyau sosai don yanke tiyo a kusurwoyi daidai.Cire tef ɗin kuma zubar da wayoyi maras kyau tare da bututu.Burrs a kan diamita na bututu ya kamata a cire shi da wuka.Tsaftace diamita na ciki na tiyo.
Wani lokaci, lanƙwan igiyar ƙarfe za ta buɗe a gefe ɗaya kuma ta faɗo ƙasa a ɗayan ƙarshen.Ana iya amfani da wannan.Zamar da kwasfa biyu baya baya kan ƙananan ƙarshen wuyan bututun kuma sanya su kusan inci 3 daga kowane ƙarshen.Shigar da bututun ƙarshen tiyo a cikin vise, sa'an nan kuma yi aikin rami a kan nono zuwa girman bututun kuma taimakawa wajen raba suturar daga bututu kafin hada hannun riga.
Mataki na 2
Tura hannun tagulla ta ƙarshen bututun da hannu kuma danna shi a ƙarƙashin igiya na waya.Ana kammala sanya hannun riga ta hanyar tura ƙarshen bututun a kan shimfidar wuri.Duba hannun riga don tantance ƙarshen bututu a gaban kafadar ciki.Saka sandar hannun riga a cikin bututu ta hanyar tura mazugi na mazugi mai zagaye ko flared mandrel zuwa ƙarshen bututun PTFE.
Mataki na 3
Riƙe kayan haɗi tare da vise mai santsi ko taushi.Sa mai nonuwa da zaren zare.Daidaitaccen kayan aikin bututun ƙarfe na iya amfani da mai mai;kayan aikin bakin karfe yakamata suyi amfani da mai mai molybdenum (misali, nau'in Molykote G).A kowane hali, guje wa amfani da man shafawa mai chloride.Tura bututun ta cikin nono a cikin motsin motsi har sai ya kusa da chamfer.Tura soket ɗin gaba kuma fara zaren soket ɗin akan zaren taron.
Mataki na 4
Tsayawa tare da maƙarƙashiya har sai rata tsakanin hexagon na ciki na hannun hannu bai wuce 1/32 ba. Idan ya cancanta, ƙara ƙarfafa kayan haɗin agogo ko daidaita sasanninta na soket da hexagon. Yi gwaje-gwajen tsaftacewa da tabbatarwa a ƙarƙashin matsi biyu na aiki. Kuma a duba duk majalisu.
Lokacin tarwatsawa, da farko cire dunƙule sannan a cire nonon.Ta danna ƙasa mai lebur, zamewa soket ɗin baya daga ƙarshen bututun.Cire rumbun tare da filaye kuma jefar.
Muhimmiyar sanarwa: Ana iya cire kayan haɗi kuma a sake amfani da shi aƙalla sau ɗaya;duk da haka, ya kamata a duba ƙarshen bututun sosai don alamun karkatarwa, lalata zaren, da rushewa.Ya kamata a yi amfani da sabon hannun riga a duk lokacin da aka yi amfani da ƙarshen bututun.
Haɗa Bakin Karfe Braided PTFE Fuel/Oil Hose & AN Ƙarshen Hose
Idan ana amfani da ku don yin amfani da tiyon ja da shuɗi na gargajiya na ƙare tare da roba mai layi na bakin karfe braided hoses, abu na farko da za ku iya lura da shi shine cewa abin wuyan azurfa akan waɗannan na'urorin haɗi zai zame ƙasa da baƙar fata.
Wannan al'ada ce!
Ba kamar waɗancan ƙarshen bututun na tsofaffi ba, sassan biyu na waɗannan ƙarshen bututun ba za a iya haɗa su tare ba.Hasali ma ba za su taba ba har sai an kusa kammala taron.
Zane na ƙwanƙarar azurfa shine ɗan ƙaramin sako mai dacewa.Yana da gaske kawai yana ba ku matakin ƙarfafawa na ƙarshe a cikin hexadecimal.Bangaren ciki na baƙar fata zai zare kanta a cikin madaidaicin rufin PTFE yayin shigar da shi.(A fasaha, ana kuma ƙera abin wuyan azurfa don riƙe bututun da kyau zuwa sashin ciki, amma idan kun sanya shi a kan bututun a karon farko, zai sassauta.)
Mataki na 1
Yi amfani da abin yanka ko hacksaw mai kyau sosai don yanke tiyo a kusurwoyi daidai.Domin rage girman sautin ƙahon da aka yi masa gwanjo, iska da bututun laƙabi mai nau'in aramid mai nau'in 910 tare da tef ɗin mai shuɗi mai ƙarancin danko, ko kuma iska da bututun bakin karfe mai nau'in nau'in 811 tare da madaurin fiber gilashi.Kar a cire tef din har sai kun shirya don ci gaba zuwa mataki na 2.
Mataki na 2
Cire tef ɗin, sa'an nan kuma da sauri saka bututun cikin soket.Saka bututun tare da motsi mai juyawa, kuma ciyar da bel ɗin da aka yi masa lanƙwasa yayin jujjuya bututun.Waɗannan ƙarshen tiyo mai sauƙin shigar ba sa buƙatar kayan aikin Koul.
Mataki na 3
Matsa kayan aikin bututun tare da vise mai santsi ko taushi, kuma sa mai zaren da mai haske
Mataki na 4
Lokacin juya bututun, tura bututun da ƙarfi akan zaren.Ci gaba da juya bututun har sai an haɗa zaren uku zuwa huɗu na farko.
Mataki na 5
Matsa soket tare da maƙarƙashiya.Ci gaba da juya soket har sai ya kai kasan zaren.Muhimmiyar sanarwa: Lokacin da soket ya isa kasan zaren, ci gaba da juyawa biyu.
Mataki na 6
Tsaftace taron sosai.Yi gwaje-gwajen tabbatarwa a ƙarƙashin matsi biyu na aiki kuma a hankali bincika duk taruka.
Mu ne ƙwararrun masana'anta naPTFE mai suturar tiyo, da muAN ƙwanƙwasa tiyon PTFE range is from AN3 to AN20, also available for the outer options of PVC/PU/PA coated, Dacron/Nylon/Aramid braided and etc. If you have any inquiry, please freely contact us sales02@zx-ptfe.com
Binciken da ya danganci ptfe hose:
Lokacin aikawa: Janairu-22-2021