Takardar da ke ƙasa ta bayyana yadda ya kamata a saita tsarin mai a kan kayan aikin FR ProStreet. Akwai manyan sassa biyu na tsarin mai, ciyarwa da dawowa. A kan injin turbochargers na bushing, tsarin mai yana da matuƙar muhimmanci. Man yana aiki da manufofi biyu, yana mai da mai kuma yana sanyaya bearings ɗin da ke cikin CHRA.Idan ba a shigar da shi yadda ya kamata ba, Rashin kyawun saitin mai na iya haifar da turbocharger ko kuma gazawar injin gaba ɗaya.Haka kuma, mai tsafta wajibi ne a tsarin turbo. Muna ba da shawarar a yi matattarar mai a layi duk lokacin da zai yiwu.
Wannan zai samar muku da ƙarin inshorar samar da turbocharger mai tsabtamai da aka tace a kowane lokaci.
Ciyarwa
Ana samar da man turbocharger daga tashar firikwensin matsin lamba na mai da ke bayan toshewar. An saita wannan tare da kayan haɗin BSPT, NPT, da -3 da aka haɗa.Layin AN. PTFEAna buƙatar tef a duk hanyoyin da suka dacesai daidon haɗin AN digiri 37. Hakanan yana da matuƙar ƙarfi
an ba da shawarar a tsaftace tubalan da layuka kafin a saka su domin a iya gano ɓullar ruwa cikin sauƙi.
1. Tsaftace yankin da ke kewaye da na'urar auna matsin lamba ta mai.
2. Cire na'urar auna matsin lamba ta mai.
3. Sanya BSPT fitting a cikin toshe.
4. Sanya 1/8 inci na NPT "T" a cikin BSPT ɗin da aka haɗa.
5. Sanya na'urar auna matsin lamba ta mai a cikin "T" na NPT.
6. Shigar da inci 1/8 zuwa-3 ANadaftar zuwa NPT "T".
7. A ɗaure layi na -3 zuwa -3 daidaitacce.
8. Layin gudu daga bayan tubalin zuwa turbocharger. Layin ya yi hanya domin ya yi aikiyana share duk sassan motsi da hanyoyin zafi.
9. Sanya na'urar shigar mai a kan turbocharger.
10. A ɗaure layin -3 zuwa turbocharger.
Magudanar ruwa
Ana mayar da magudanar mai ta turbocharger zuwa cikin kaskon mai. Muna ba da shawarar a saka matattarar mai.An samar da - ƙarfe mai laushi 10 gwargwadon iyawa a kan kaskon. Haka kuma, layin magudanar mai bai kamata ya lanƙwasa ba kwata-kwata. Lanƙwasa ya kamata ya sami babban radius mai santsi duk lokacin da zai yiwu. Wannan zai hana "juyawa" kuma zai tabbatar da magudanar ruwa yadda ya kamata.
1. Mai tsakuwa.
2. Cire kwanon rufi.
3. Tsaftace kaskon.
4. Shirya kaskon walda.
5. Yi layi -10 daga turbo zuwa tukunya.
6. Kayyade matsayin da aka sanya masa ƙaramin ƙarfe -10.
7. Kumburin tack.
8. Gwada shigar da kwanon rufi da kuma layin mai.
9. Sake saita shi idan ya cancanta.
Hotunan da ke ƙasa suna nuna layin magudanar ruwa da aka sanya yadda ya kamata.
Hoto na 1. Kayan aikin magudanar mai na CHRA
Hoto na 2. Layin magudanar ruwa na mai
Hoto na 3. -10 mai sauƙin daidaita ƙarfe
Hoto na 4. Duban sama na tsarin da aka shigar
Lokacin Saƙo: Yuni-26-2023